Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

SB TACTICAL
LOCKING BUFFER TUBE FOLDING ADAPTER

699618782806 100032046
Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
0 0 1 EUR
Artikel-Nr.: 100032046
SB TACTICAL LOCKING BUFFER TUBE FOLDING ADAPTER
Herstellerproduktnummer: BTFA 699618782806 Der BTFA Buffer Tube Folding Adapter von SB Tactical bietet ein einfaches Upgrade, um die Tragbarkeit Ihres Repetierbüchsen-Chassis-Systemgewehrs zu verbessern, indem er ihm einen klappbaren Hinterschaft verleiht. Mit dem BTFA können Sie einen Klappschaft an jedem Gewehr anbringen, das ein standardmäßiges AR-15-Pufferrohr als Befestigungspunkt für die Montage seines Hinterschafts verwendet. Der Adapter wird einfach in die Rückseite des Chassis geschraubt - dort, wo normalerweise das AR-15-Pufferrohr hingehört - und dann wird das Pufferrohr in den BTFA geschraubt. Der BTFA erhöht die Zuglänge Ihres Gewehrs im eingebauten Zustand nur um 1,1 Zoll. Sie können dies entweder ausgleichen, indem Sie den Schaft etwas weniger verlängern, wenn es sich um einen verstellbaren M4-Karabinerschaft handelt. Und viele Schützen mit längeren Armen werden dies begrüßen zusätzliche LOP. Umschaltbar für rechts- oder linksseitiges Einklappen – was für Sie am besten funktioniert Arretiert sicher in der offenen UND geschlossenen Position Akzeptiert AR-15-Pufferrohr, A2-Gewehr oder M4-Karabinertyp Minimales Gewicht (nur 3,4 Unzen) und Masse ( 1,1" zu LOP hinzugefügt) Achtung: Passt nur auf Chassis-Systemgewehre, NICHT auf die Standard-AR-15-Plattform (siehe Gun Tech Note unten). Eloxiertes Finish, um Oberflächenverschleiß und Korrosion zu widerstehen. Brownells Gun Tech™ Hinweis: Sie denken wahrscheinlich: „Warum kann ich den BTFA nicht verwenden, um einen Klappschaft an meinem AR-15 in Standardkonfiguration anzubringen? Um maximale Festigkeit zu gewährleisten, verfügt der BTFA über solide Schotts, die den Durchgang verhindern eines Rückstoßpuffers, daher funktioniert es NICHT mit dem Standard-Betriebssystem AR-15.Für das AR-15 bieten wir den Law Tactical Gen3-M-Klappschaftadapter (#100-015-850) an.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.

Eigenschaften

Versandgewicht: 0,141kg Versandhöhe: 89mm Versandbreite: 89mm Versandlänge: 70mm

Artikeldetails

US-Exportklassifizierung: 0A501.x



Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
Newsletter