The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish.
Mehr...
Das hochkarätige Vickers Elite Battlesight-Heck verfügt über eine 1,45-Zoll-breite, tiefe U-Kerbe für optimale Sicht bei schlechten Lichtverhältnissen und dynamischem Bereich und passt perfekt zu unseren 1,25-Zoll-Visieren. Die konkave, nicht reflektierende hintere Klinge hat eine Verzahnung von 40 Linien pro Zoll, während der Kerbbereich in eine halbrunde Tasche eingelassen ist, um ein klares, geschütztes Sichtbild zu erhalten. Zwei gehärtete Gewindestifte sorgen dafür, dass sich dieses Visier unter schwierigsten Bedingungen niemals löst. Dieses störungsfreie Visier hat auch eine Regalform, die eine Einhand-Rutschbewegung oder Fehlfunktionsbeseitigung ermöglicht, und ein robustes, nicht reflektierendes mattschwarzes Parker-Finish.
Mehr...
Kundenbewertungen zu WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Great sights for 43(25.01.2018)
This was my first U-notch rear sight, so a bit of a leap of faith. I am now sold. This rear sight is great, its steel (not alum), I like the set screws for just-in-case. The notch is great, they fit great and look great on my new 43.
The pictures were shot with a flash, so they are not exactly accurate on the color; the sight is flat black.
For a front sight, I used a Trijicon HD XR glock front for a 45. (892-000-359WB ). On glocks, the height of front sight for 45/10mm is less than 9mm models. The Wilson matching front is listed at .200 high, which is same as the HD XR, (per Trijicon website). I did some math and guessed that the front would match up with this rear sight.
It matches quite well. How wide a rear for a given front is a personal thing, I like my rears pretty wide with some light on each side. The short radius of a 43 and the not super narrow front, gives a little light on each side when shooting. On a competition pistol, I would want more light per side, but on a 43, it just works.
Its a great combo, and I now want Wilson U-notch sights on the rest of my glocks!
Artikel-Nr.: 965000221 WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43 Herstellerproduktnummer: 759B811826021168 Das hochkarätige Vickers Elite Battlesight-Heck verfügt über eine 1,45-Zoll-breite, tiefe U-Kerbe für optimale Sicht bei schlechten Lichtverhältnissen und dynamischem Bereich und passt perfekt zu unseren 1,25-Zoll-Visieren. Die konkave, nicht reflektierende hintere Klinge hat eine Verzahnung von 40 Linien pro Zoll, während der Kerbbereich in eine halbrunde Tasche eingelassen ist, um ein klares, geschütztes Sichtbild zu erhalten. Zwei gehärtete Gewindestifte sorgen dafür, dass sich dieses Visier unter schwierigsten Bedingungen niemals löst. Dieses störungsfreie Visier hat auch eine Regalform, die eine Einhand-Rutschbewegung oder Fehlfunktionsbeseitigung ermöglicht, und ein robustes, nicht reflektierendes mattschwarzes Parker-Finish.
83.9EUR183,90 €
*
Lieferzeit ca. 14-21 Werktage. 1 Stk. im Lager USA
Artikel-Nr.: 965000369 WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR G42/43, TRITIUM TWO DOT Herstellerproduktnummer: 759T811826021175 Das hochkarätige Vickers Elite Battlesight-Heck verfügt über eine 1,45-Zoll-breite, tiefe U-Kerbe für optimale Sicht bei schlechten Lichtverhältnissen und dynamischem Bereich und passt perfekt zu unseren 1,25-Zoll-Visieren. Die konkave, nicht reflektierende hintere Klinge hat eine Verzahnung von 40 Linien pro Zoll, während der Kerbbereich in eine halbrunde Tasche eingelassen ist, um ein klares, geschütztes Sichtbild zu erhalten. Zwei gehärtete Gewindestifte sorgen dafür, dass sich dieses Visier unter schwierigsten Bedingungen niemals löst. Dieses störungsfreie Visier hat auch eine Regalform, die eine Einhand-Rutschbewegung oder Fehlfunktionsbeseitigung ermöglicht, und ein robustes, nicht reflektierendes mattschwarzes Parker-Finish.
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish.
Mehr...
Das hochkarätige Vickers Elite Battlesight-Heck verfügt über eine 1,45-Zoll-breite, tiefe U-Kerbe für optimale Sicht bei schlechten Lichtverhältnissen und dynamischem Bereich und passt perfekt zu unseren 1,25-Zoll-Visieren. Die konkave, nicht reflektierende hintere Klinge hat eine Verzahnung von 40 Linien pro Zoll, während der Kerbbereich in eine halbrunde Tasche eingelassen ist, um ein klares, geschütztes Sichtbild zu erhalten. Zwei gehärtete Gewindestifte sorgen dafür, dass sich dieses Visier unter schwierigsten Bedingungen niemals löst. Dieses störungsfreie Visier hat auch eine Regalform, die eine Einhand-Rutschbewegung oder Fehlfunktionsbeseitigung ermöglicht, und ein robustes, nicht reflektierendes mattschwarzes Parker-Finish.
Mehr...
Kundenbewertungen zu WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Great sights for 43(25.01.2018)
This was my first U-notch rear sight, so a bit of a leap of faith. I am now sold. This rear sight is great, its steel (not alum), I like the set screws for just-in-case. The notch is great, they fit great and look great on my new 43.
The pictures were shot with a flash, so they are not exactly accurate on the color; the sight is flat black.
For a front sight, I used a Trijicon HD XR glock front for a 45. (892-000-359WB ). On glocks, the height of front sight for 45/10mm is less than 9mm models. The Wilson matching front is listed at .200 high, which is same as the HD XR, (per Trijicon website). I did some math and guessed that the front would match up with this rear sight.
It matches quite well. How wide a rear for a given front is a personal thing, I like my rears pretty wide with some light on each side. The short radius of a 43 and the not super narrow front, gives a little light on each side when shooting. On a competition pistol, I would want more light per side, but on a 43, it just works.
Its a great combo, and I now want Wilson U-notch sights on the rest of my glocks!