Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 1¼" diameter with either encapsulated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes ½" square drive opening for torque wrench application; 5⁄8" and ¾" slots fit receiver extensions and A1/A2 flash suppressors applications, .308 for use with AR-Style .308 rifles. 3/4 inch slot may not fit some brakes, flash hiders or comps with less than .410 long driving flats. Will NOT work with DPMS 20 tooth pattern .308 barrel nuts.
Der besonders robuste Armorers-Schraubenschlüssel erleichtert die Montage und Demontage aller Läufe bis zu einem Durchmesser von 1¼ "mit eingekapselten oder stiftförmigen Laufmuttern. Der extra lange Griff verfügt über glatte, konturierte Kanten für eine komfortable Verwendung Schlüsselanwendung; 5⁄8 "- und ¾" -Schlitze passen für Empfängererweiterungen und A1 / A2-Blitzunterdrückungsanwendungen, .308 für die Verwendung mit AR-Style .308-Gewehren. Der 3/4-Zoll-Steckplatz passt möglicherweise nicht für einige Bremsen, Flash-Hiders oder Comps mit weniger als .410 langen Driving Flats. Funktioniert NICHT mit .308-Zylindermuttern mit DPMS 20-Zähnen.
TECHNISCHE DATEN: Edelstahl 17-4, schwarz oxidiert. 30 cm langer und 2,5 cm breiter Griff. 400 dicke.
Mehr...
Kundenbewertungen zu SMITH ENTERPRISE .308 ARMORER'S WRENCH
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,3
Heavy Duty, Quality Tool(26.09.2009)
This tool is very heavy duty, and fits the barrel nut tightly making even the toughest barrel nuts break loose without too much effort. No need for a breaker bar for leverage, although the 1/2" drive hole is there. Good to go right out of the box. A must-have for rebarreling on AR-10's.
Very Good Quality Wrench(04.11.2009)
I was a little skeptical, because it is a little expensive. But, this very heavy duty wrench made working on my AR very easy and was worth the price.
Not for DPMS .308 free float tubes(23.01.2012)
Excellant wrench overall but will not fit DPMS free float tube.
NOT for DPMS/LR308 Rifles!(21.09.2012)
You'd think a ".308 Armor's Wrench" for "AR-Style 308 Style Rifles" would work for a DPMS Rifle with a Free float tube.... No Dice. The Peg spacing doesn't fit the DPMS barrel nut, and the muzzle device area is too wide to fit a 5/8x28 DPMS flash hider due to the crush washer. That makes this purchase a total waste of time and money for me, and you too if you have a DPMS pattern rifle.
Not for a DPMS LR-308(07.01.2015)
One peg for the barrel nut broke during shipping. It doesn't fit my DPMS LR-308 but it works on a AR-10 Barrel Nut.
Performs as Designed(15.11.2016)
I have been using this wrench for just over a year. It has served me well during several AR-10 builds and numerous repairs and rebarreling projects. Unlike previous reviewers I have only found one rifle this wrench did not readily fit and that was an Stag Arms AR -10 and that was due to proprietary hole spacing on the barrel nut and with a slight modification of removing the middlle pin it worked fine. I also have the matching AR-15 wrench which works just as well. They are a heavy duty wrench that should last as long as there are guns to use them on.
Too thick(14.10.2017)
Very good quality but it is too thick to fit most muzzle devices using a crash washer. I had to grind mine down thinner to fit.
Artikel-Nr.: 851115001 SMITH ENTERPRISE .308 ARMORER'S WRENCH Herstellerproduktnummer: 1035 Der besonders robuste Armorers-Schraubenschlüssel erleichtert die Montage und Demontage aller Läufe bis zu einem Durchmesser von 1¼ "mit eingekapselten oder stiftförmigen Laufmuttern. Der extra lange Griff verfügt über glatte, konturierte Kanten für eine komfortable Verwendung Schlüsselanwendung; 5⁄8 "- und ¾" -Schlitze passen für Empfängererweiterungen und A1 / A2-Blitzunterdrückungsanwendungen, .308 für die Verwendung mit AR-Style .308-Gewehren. Der 3/4-Zoll-Steckplatz passt möglicherweise nicht für einige Bremsen, Flash-Hiders oder Comps mit weniger als .410 langen Driving Flats. Funktioniert NICHT mit .308-Zylindermuttern mit DPMS 20-Zähnen.
Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 1¼" diameter with either encapsulated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes ½" square drive opening for torque wrench application; 5⁄8" and ¾" slots fit receiver extensions and A1/A2 flash suppressors applications, .308 for use with AR-Style .308 rifles. 3/4 inch slot may not fit some brakes, flash hiders or comps with less than .410 long driving flats. Will NOT work with DPMS 20 tooth pattern .308 barrel nuts.
Der besonders robuste Armorers-Schraubenschlüssel erleichtert die Montage und Demontage aller Läufe bis zu einem Durchmesser von 1¼ "mit eingekapselten oder stiftförmigen Laufmuttern. Der extra lange Griff verfügt über glatte, konturierte Kanten für eine komfortable Verwendung Schlüsselanwendung; 5⁄8 "- und ¾" -Schlitze passen für Empfängererweiterungen und A1 / A2-Blitzunterdrückungsanwendungen, .308 für die Verwendung mit AR-Style .308-Gewehren. Der 3/4-Zoll-Steckplatz passt möglicherweise nicht für einige Bremsen, Flash-Hiders oder Comps mit weniger als .410 langen Driving Flats. Funktioniert NICHT mit .308-Zylindermuttern mit DPMS 20-Zähnen.
TECHNISCHE DATEN: Edelstahl 17-4, schwarz oxidiert. 30 cm langer und 2,5 cm breiter Griff. 400 dicke.
Mehr...
Kundenbewertungen zu SMITH ENTERPRISE .308 ARMORER'S WRENCH
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,3
Heavy Duty, Quality Tool(26.09.2009)
This tool is very heavy duty, and fits the barrel nut tightly making even the toughest barrel nuts break loose without too much effort. No need for a breaker bar for leverage, although the 1/2" drive hole is there. Good to go right out of the box. A must-have for rebarreling on AR-10's.
Very Good Quality Wrench(04.11.2009)
I was a little skeptical, because it is a little expensive. But, this very heavy duty wrench made working on my AR very easy and was worth the price.
Not for DPMS .308 free float tubes(23.01.2012)
Excellant wrench overall but will not fit DPMS free float tube.
NOT for DPMS/LR308 Rifles!(21.09.2012)
You'd think a ".308 Armor's Wrench" for "AR-Style 308 Style Rifles" would work for a DPMS Rifle with a Free float tube.... No Dice. The Peg spacing doesn't fit the DPMS barrel nut, and the muzzle device area is too wide to fit a 5/8x28 DPMS flash hider due to the crush washer. That makes this purchase a total waste of time and money for me, and you too if you have a DPMS pattern rifle.
Not for a DPMS LR-308(07.01.2015)
One peg for the barrel nut broke during shipping. It doesn't fit my DPMS LR-308 but it works on a AR-10 Barrel Nut.
Performs as Designed(15.11.2016)
I have been using this wrench for just over a year. It has served me well during several AR-10 builds and numerous repairs and rebarreling projects. Unlike previous reviewers I have only found one rifle this wrench did not readily fit and that was an Stag Arms AR -10 and that was due to proprietary hole spacing on the barrel nut and with a slight modification of removing the middlle pin it worked fine. I also have the matching AR-15 wrench which works just as well. They are a heavy duty wrench that should last as long as there are guns to use them on.
Too thick(14.10.2017)
Very good quality but it is too thick to fit most muzzle devices using a crash washer. I had to grind mine down thinner to fit.