Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

AREA 419
ARCALOCK MPA CHASSIS ATTACHMENT

853675008914 100032675
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
150.9 150.9 1 EUR
Artikel-Nr.: 100032675
AREA 419 ARCALOCK 14" ARCA SWISS RAIL FOR MPA CHASSIS
Herstellerproduktnummer: 419ALKMPA14 853675008914 Area 419 sucht immer nach Möglichkeiten, bestehende Produkte zu verbessern, wenn wir keine neuen Technologien entwickeln. Mit der rasant wachsenden Popularität von ARCA-Schienen in Präzisionsgewehren sahen wir die Notwendigkeit, diese großartige Schwalbenschwanz-Technologie zu etwas zu verbessern, das mechanisch anstatt nur durch Reibung arretiert werden konnte. Wenn Sie jemals versucht haben, einen Barricade-Stop auf einer vorhandenen ARCA-Schiene zu verwenden, haben Sie wahrscheinlich auch gesehen, wie er unter viel Druck rutscht. Schienenmerkmale: Gezahnte Schienenseiten verbinden sich mit unserem proprietären Klemmendesign, um sie mechanisch zu verriegeln, sodass keine Bewegung möglich ist. Die Schiene ist 14 Zoll lang und bietet Ihnen die gesamte Länge des Schaftvorders für Anbauteile. 65 Eingravierte Positionen Passt mindestens auf die MPA BA- und BA Comp-Chassis, kann auch auf den Hybrid passen **Passt nicht zum Lite** Spigot unterstützt die Vorderseite der Schiene, aber die Schiene funktioniert auch ohne MPA-Zapfen Sehen Sie nur ein wenig Flex, wenn das Zweibein ganz nach vorne gerichtet ist Der Zugang zum Rückstoßstollenkeil ist nicht behindert. Hergestellt nach dem RRS 1,5″ Schwalbenschwanz-Standard, damit Sie sicher sein können, dass die Hebelklemmen funktionieren Keine scharfen Kanten. Jede Ecke wird gerundet und jede Kante wird auf der Maschine gefast. Typ 3 Hard Coat eloxiert für zusätzliche Haltbarkeit. Hergestellt aus 6061-T6 Aluminium Rail kommt mit allen notwendigen Hardware
150.9 EUR 1 150,90 € *
Lieferzeit ca. 14-21 Werktage.
1 Stk. im Lager USA
Eigenschaften: Attachment: Adapter Mount

Eigenschaften

Attachment: Adapter Mount Versandgewicht: 0,299kg Versandhöhe: 58mm Versandbreite: 56mm Versandlänge: 399mm




Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
Newsletter