Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
Sperrt alle Lagerbestände in bester Position, ohne dass das Layout und die Kontrolle erforderlich sind
Eine Wiege macht das Checkering so viel einfacher - und die Ergebnisse so viel besser -, dass wir noch nie einen professionellen Stockmaker getroffen haben, der keine Checkering-Wiege verwendet hat! Zwei der wichtigsten Vorteile einer guten Schachbretthalterung sind: 1) Sie können mit beiden Händen arbeiten und den Schaft drehen, während Sie mit dem Schachbrett über das Muster fahren, um den Arbeitsbereich in der bequemsten, kontrollierten Position zu halten. Auf diese Weise entfällt die unbeholfene und schwierige Aufgabe, einen stationären Bestand zu umgehen - manchmal fast bis zum Aufstehen - und dem Muster von Rand zu Rand korrekt zu folgen. 2) Verhindert das Hin- und Herwackeln, das die Schneidwirkung der Schachbrettwerkzeuge beeinträchtigt. Wenn der Schaft nicht sicher gehalten wird, bewegt er sich mit dem Schneider. Durch diese Bewegung kann der Fräser den Schaft greifen und es ist fast unmöglich, gerade Linien mit gleichmäßiger Tiefe zu schneiden. Einfaches Design, niedrige Kosten, robuste Holzkonstruktion und äußerst praktisch. Einstellbar für Gewehrschäfte mit einer Länge von bis zu 33 Zoll (einschließlich aller Schäfte mit Ausnahme von Schäften im Mannlicher-Stil) und für alle Schrotflintenschäfte und -stützen. Hält den Schaft fest, ohne das Finish zu beschädigen, ermöglicht jedoch das Wenden des Schafts im Verlauf der Arbeit. Praktisch auch Zum Einfüllen, Schleifen, Beizen und Veredeln des Materials. Direkt an der Bank verschrauben oder in einem stabilen Schraubstock einrasten. Komplett mit allen Haltern, Schrauben und Anleitungen.
TECHNISCHE DATEN: 105 cm lang, 21 cm hoch und 3,8 cm breit.
Mehr...
Kundenbewertungen zu BROWNELLS CHECKERING CRADLE
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 2
Warning(05.04.2014)
For this price I expected better than a pine 2x4 with a handful of hardware store nuts and bolts. It is not even worth the price of shipping.
Expected better... much better(26.12.2016)
Considering the fact that it bears the Brownell's name, I expected better, much better... better design, better manufacturing. It is made simply from a 2 x 4 and a few bolts that anybody can buy from your local hardware store and make with a saw and drill press. The 42 inch 2x4 that came with mine is twisted. Brownell's would do better to sell the design on-line for approximately $15.00. Or to require that the item be made from better material (maple, wallet, cherry, or even sold plastic). That all being said, this tool, along with checkering tools Dem-Bart and a refinishing, will help me turn a rifle I bought for $500 into one that looks like one worth $2000.
Artikel-Nr.: 080026000 BROWNELLS CHECKERING CRADLE Herstellerproduktnummer: 080026000050806104105 Eine Wiege macht das Checkering so viel einfacher - und die Ergebnisse so viel besser -, dass wir noch nie einen professionellen Stockmaker getroffen haben, der keine Checkering-Wiege verwendet hat! Zwei der wichtigsten Vorteile einer guten Schachbretthalterung sind: 1) Sie können mit beiden Händen arbeiten und den Schaft drehen, während Sie mit dem Schachbrett über das Muster fahren, um den Arbeitsbereich in der bequemsten, kontrollierten Position zu halten. Auf diese Weise entfällt die unbeholfene und schwierige Aufgabe, einen stationären Bestand zu umgehen - manchmal fast bis zum Aufstehen - und dem Muster von Rand zu Rand korrekt zu folgen. 2) Verhindert das Hin- und Herwackeln, das die Schneidwirkung der Schachbrettwerkzeuge beeinträchtigt. Wenn der Schaft nicht sicher gehalten wird, bewegt er sich mit dem Schneider. Durch diese Bewegung kann der Fräser den Schaft greifen und es ist fast unmöglich, gerade Linien mit gleichmäßiger Tiefe zu schneiden. Einfaches Design, niedrige Kosten, robuste Holzkonstruktion und äußerst praktisch. Einstellbar für Gewehrschäfte mit einer Länge von bis zu 33 Zoll (einschließlich aller Schäfte mit Ausnahme von Schäften im Mannlicher-Stil) und für alle Schrotflintenschäfte und -stützen. Hält den Schaft fest, ohne das Finish zu beschädigen, ermöglicht jedoch das Wenden des Schafts im Verlauf der Arbeit. Praktisch auch Zum Einfüllen, Schleifen, Beizen und Veredeln des Materials. Direkt an der Bank verschrauben oder in einem stabilen Schraubstock einrasten. Komplett mit allen Haltern, Schrauben und Anleitungen.
189.9EUR0189,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
Sperrt alle Lagerbestände in bester Position, ohne dass das Layout und die Kontrolle erforderlich sind
Eine Wiege macht das Checkering so viel einfacher - und die Ergebnisse so viel besser -, dass wir noch nie einen professionellen Stockmaker getroffen haben, der keine Checkering-Wiege verwendet hat! Zwei der wichtigsten Vorteile einer guten Schachbretthalterung sind: 1) Sie können mit beiden Händen arbeiten und den Schaft drehen, während Sie mit dem Schachbrett über das Muster fahren, um den Arbeitsbereich in der bequemsten, kontrollierten Position zu halten. Auf diese Weise entfällt die unbeholfene und schwierige Aufgabe, einen stationären Bestand zu umgehen - manchmal fast bis zum Aufstehen - und dem Muster von Rand zu Rand korrekt zu folgen. 2) Verhindert das Hin- und Herwackeln, das die Schneidwirkung der Schachbrettwerkzeuge beeinträchtigt. Wenn der Schaft nicht sicher gehalten wird, bewegt er sich mit dem Schneider. Durch diese Bewegung kann der Fräser den Schaft greifen und es ist fast unmöglich, gerade Linien mit gleichmäßiger Tiefe zu schneiden. Einfaches Design, niedrige Kosten, robuste Holzkonstruktion und äußerst praktisch. Einstellbar für Gewehrschäfte mit einer Länge von bis zu 33 Zoll (einschließlich aller Schäfte mit Ausnahme von Schäften im Mannlicher-Stil) und für alle Schrotflintenschäfte und -stützen. Hält den Schaft fest, ohne das Finish zu beschädigen, ermöglicht jedoch das Wenden des Schafts im Verlauf der Arbeit. Praktisch auch Zum Einfüllen, Schleifen, Beizen und Veredeln des Materials. Direkt an der Bank verschrauben oder in einem stabilen Schraubstock einrasten. Komplett mit allen Haltern, Schrauben und Anleitungen.
TECHNISCHE DATEN: 105 cm lang, 21 cm hoch und 3,8 cm breit.
Mehr...
Kundenbewertungen zu BROWNELLS CHECKERING CRADLE
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 2
Warning(05.04.2014)
For this price I expected better than a pine 2x4 with a handful of hardware store nuts and bolts. It is not even worth the price of shipping.
Expected better... much better(26.12.2016)
Considering the fact that it bears the Brownell's name, I expected better, much better... better design, better manufacturing. It is made simply from a 2 x 4 and a few bolts that anybody can buy from your local hardware store and make with a saw and drill press. The 42 inch 2x4 that came with mine is twisted. Brownell's would do better to sell the design on-line for approximately $15.00. Or to require that the item be made from better material (maple, wallet, cherry, or even sold plastic). That all being said, this tool, along with checkering tools Dem-Bart and a refinishing, will help me turn a rifle I bought for $500 into one that looks like one worth $2000.