Easy-to-use tool helps you remove factory front sights and install aftermarket sights. The punch is just the right size for depressing front sight center spreader; hex wrench holds and tightens the small retaining nut for the replacement sight. Non-slip knurled grip.
SPECS: Delrin handle. Steel punch and wrench. Black. 3/32" (2.3mm) punch. 5¼" (13.3cm) long. Will not work for models 17L, 34, 35, 24, and 24C.
Mehr...
Handliches Tool für einfachere Änderungen des Glock-Sehvermögens
Mit dem benutzerfreundlichen Werkzeug können Sie die werkseitigen Visiere entfernen und die Nachrüstvisiere installieren. Der Stempel hat genau die richtige Größe, um den Spreizer in der Visiermitte niederzudrücken. Der Sechskantschlüssel hält die kleine Haltemutter für das Ersatzvisier und zieht sie fest. Rutschfester gerändelter Griff.
"GLOCK" ist eine bundesweit eingetragene Marke von Glock, Inc. und eine von vielen Marken von Glock, Inc. oder Glock Ges.m.b.H. Brownells ist ein unabhängiger Händler von Teilen und Zubehör für Glock®-Pistolen und steht in keiner Beziehung zu Glock, Inc. oder Glock Ges.m.b.H. Die Verwendung von Glock auf dieser Seite dient lediglich dazu, für den Verkauf von Glock-Teilen oder -Komponenten zu werben. Wie in den Produktbeschreibungen angegeben, sind nicht alle Teile und Zubehörteile auf dieser Website offizielle Glock-Produkte.
Angaben: Delrin Griff. Stahllocher und Schraubenschlüssel. Schwarz. 3/32 "(2,3 mm) Locher. 5" (13,3 cm) lang. Funktioniert nicht für die Modelle 17L, 34, 35, 24 und 24C.
Mehr...
Kundenbewertungen zu B & J MACHINE SIGHT TOOL FOR GLOCK
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 3,3
THE tool for working on the front sight!(13.11.2009)
Didn't work to great on removal of front sight, maybe lack of practice. . BUT absolutely perfect when installing after market sights. Allows VERY EASY tightening of screws on after market sights. Just drop some lock tite on and screw it in. So easy a child could do it. . Nice and solid as well not some flimsy junk!
Works well(23.04.2012)
Very sturdy tool. Heavy and stable. Used to change front sight. Able to torque correctly with knurled barrel.
Will not work on Glock 35 front sights.(10.08.2012)
The take own pin is not hardened steel and bends easily. The nut driver end for the front sights will not engage the shallow screw head.
Works fine a touch too large in diameter(10.08.2012)
I've used this tool to install extended slide releases and factory front night sights on 4 Gen 4 Glocks. The punch side is great. The hex socket side works but it can be a very tight fit between the slide and a hex node on the sight retaining screw if one of the screw head points is positioned between 11 o'clock and 1 o'clock relative to the muzzle end of the slide. I suggest chucking the tool up in a drill, hand or press, and using fine crocus cloth or a smooth cut file to reduce the outside diameter of the hex socket.
This tool will enable you to remove that plastic factory front sight, add a drop of blue loctite and the new front sight installation is done.
Fails in its catagory(08.06.2013)
Housing to thick to fit onto Glock sight screw. Had to grind it down to fit. Also the punch on the other end keeps you from applying downward presure on the screw. After grinding down the screw end and cutting off the punch... it worked great!
Great Tool for the Price.(16.07.2016)
I own three of these tools. The first on I bought I had to grind and re-radius the front sight installation portion of the tool because the diameter was to wide to fit into the G34/G35 slide front sight installation hole. B&J Machine obviously listened to reviews because the other two tools that I have bought are machined to the correct radius.
Artikel-Nr.: 694301100 B & J MACHINE SIGHT TOOL FOR GLOCK Herstellerproduktnummer: NONE617407958133 Mit dem benutzerfreundlichen Werkzeug können Sie die werkseitigen Visiere entfernen und die Nachrüstvisiere installieren. Der Stempel hat genau die richtige Größe, um den Spreizer in der Visiermitte niederzudrücken. Der Sechskantschlüssel hält die kleine Haltemutter für das Ersatzvisier und zieht sie fest. Rutschfester gerändelter Griff.
35.9EUR035,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Easy-to-use tool helps you remove factory front sights and install aftermarket sights. The punch is just the right size for depressing front sight center spreader; hex wrench holds and tightens the small retaining nut for the replacement sight. Non-slip knurled grip.
SPECS: Delrin handle. Steel punch and wrench. Black. 3/32" (2.3mm) punch. 5¼" (13.3cm) long. Will not work for models 17L, 34, 35, 24, and 24C.
Mehr...
Handliches Tool für einfachere Änderungen des Glock-Sehvermögens
Mit dem benutzerfreundlichen Werkzeug können Sie die werkseitigen Visiere entfernen und die Nachrüstvisiere installieren. Der Stempel hat genau die richtige Größe, um den Spreizer in der Visiermitte niederzudrücken. Der Sechskantschlüssel hält die kleine Haltemutter für das Ersatzvisier und zieht sie fest. Rutschfester gerändelter Griff.
"GLOCK" ist eine bundesweit eingetragene Marke von Glock, Inc. und eine von vielen Marken von Glock, Inc. oder Glock Ges.m.b.H. Brownells ist ein unabhängiger Händler von Teilen und Zubehör für Glock®-Pistolen und steht in keiner Beziehung zu Glock, Inc. oder Glock Ges.m.b.H. Die Verwendung von Glock auf dieser Seite dient lediglich dazu, für den Verkauf von Glock-Teilen oder -Komponenten zu werben. Wie in den Produktbeschreibungen angegeben, sind nicht alle Teile und Zubehörteile auf dieser Website offizielle Glock-Produkte.
Angaben: Delrin Griff. Stahllocher und Schraubenschlüssel. Schwarz. 3/32 "(2,3 mm) Locher. 5" (13,3 cm) lang. Funktioniert nicht für die Modelle 17L, 34, 35, 24 und 24C.
Mehr...
Kundenbewertungen zu B & J MACHINE SIGHT TOOL FOR GLOCK
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 3,3
THE tool for working on the front sight!(13.11.2009)
Didn't work to great on removal of front sight, maybe lack of practice. . BUT absolutely perfect when installing after market sights. Allows VERY EASY tightening of screws on after market sights. Just drop some lock tite on and screw it in. So easy a child could do it. . Nice and solid as well not some flimsy junk!
Works well(23.04.2012)
Very sturdy tool. Heavy and stable. Used to change front sight. Able to torque correctly with knurled barrel.
Will not work on Glock 35 front sights.(10.08.2012)
The take own pin is not hardened steel and bends easily. The nut driver end for the front sights will not engage the shallow screw head.
Works fine a touch too large in diameter(10.08.2012)
I've used this tool to install extended slide releases and factory front night sights on 4 Gen 4 Glocks. The punch side is great. The hex socket side works but it can be a very tight fit between the slide and a hex node on the sight retaining screw if one of the screw head points is positioned between 11 o'clock and 1 o'clock relative to the muzzle end of the slide. I suggest chucking the tool up in a drill, hand or press, and using fine crocus cloth or a smooth cut file to reduce the outside diameter of the hex socket.
This tool will enable you to remove that plastic factory front sight, add a drop of blue loctite and the new front sight installation is done.
Fails in its catagory(08.06.2013)
Housing to thick to fit onto Glock sight screw. Had to grind it down to fit. Also the punch on the other end keeps you from applying downward presure on the screw. After grinding down the screw end and cutting off the punch... it worked great!
Great Tool for the Price.(16.07.2016)
I own three of these tools. The first on I bought I had to grind and re-radius the front sight installation portion of the tool because the diameter was to wide to fit into the G34/G35 slide front sight installation hole. B&J Machine obviously listened to reviews because the other two tools that I have bought are machined to the correct radius.