Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Mehr...
Bietet ein scharfes, leicht auszurichtendes Bild
Die flache Klinge sorgt für ein klares, zielgerichtetes Visierbild, das die störende „Doppelkerbe“ eliminiert, die bei Fabrikvisieren zu finden ist. 0,160 Zoll hohe Klinge (wie werkseitig) mit abgewinkelter und gezahnter Rückseite, die Blendung reduziert. Erstreckt sich für ein saubereres Aussehen über die Rückseite des Visierkörpers und vergrößert den Sichtradius leicht. Erhältlich in zwei Kerbenbreiten, 0,110 " für Ziel- und PPC-Einsatz, plus .125" für IPSC-, IDPA- und Pin-Schießen. Eine tiefere Kerbe erleichtert die Augenausrichtung.
TECHNISCHE DATEN: 6061-T6 Aluminium, mattschwarz, eloxiert. Hitzebehandelt. .700 "(17,8 mm) Klingenbreite, .371" (9,4 mm) Höhe, .350 "(8,9 mm) Länge .085" (2,2 mm) tiefe Kerbe. Das Kit enthält eine Luftschraubenbaugruppe für die Installation. Passend für Smith & Wesson K-, L- und N-Rahmenrevolver. Funktioniert bei allen mit verstellbaren Visieren.
Mehr...
Kundenbewertungen zu BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125"
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4,8
Great choice(08.03.2013)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(05.08.2011)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(06.06.2012)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(02.08.2017)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.
Artikel-Nr.: 078000013 BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125" Die flache Klinge sorgt für ein klares, zielgerichtetes Visierbild, das die störende „Doppelkerbe“ eliminiert, die bei Fabrikvisieren zu finden ist. 0,160 Zoll hohe Klinge (wie werkseitig) mit abgewinkelter und gezahnter Rückseite, die Blendung reduziert. Erstreckt sich für ein saubereres Aussehen über die Rückseite des Visierkörpers und vergrößert den Sichtradius leicht. Erhältlich in zwei Kerbenbreiten, 0,110 " für Ziel- und PPC-Einsatz, plus .125" für IPSC-, IDPA- und Pin-Schießen. Eine tiefere Kerbe erleichtert die Augenausrichtung.
46.9EUR046,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften:Marke: Smith & WessonModell: K Frame, L Frame, N FrameSight Color: BlackStyle: Target
Marke:
Smith & Wesson
Modell:
K Frame,L Frame,N Frame
Sight Color:
Black
Style:
Target
Versandgewicht: 0,045kgHöhe: 23mmBreite: 81mmLänge: 145mm
Artikel-Nr.: 078000012 BROWNELLS COMPETITION REAR SIGHT BLADE KIT .110" Die flache Klinge sorgt für ein klares, zielgerichtetes Visierbild, das die störende „Doppelkerbe“ eliminiert, die bei Fabrikvisieren zu finden ist. 0,160 Zoll hohe Klinge (wie werkseitig) mit abgewinkelter und gezahnter Rückseite, die Blendung reduziert. Erstreckt sich für ein saubereres Aussehen über die Rückseite des Visierkörpers und vergrößert den Sichtradius leicht. Erhältlich in zwei Kerbenbreiten, 0,110 " für Ziel- und PPC-Einsatz, plus .125" für IPSC-, IDPA- und Pin-Schießen. Eine tiefere Kerbe erleichtert die Augenausrichtung.
Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Mehr...
Bietet ein scharfes, leicht auszurichtendes Bild
Die flache Klinge sorgt für ein klares, zielgerichtetes Visierbild, das die störende „Doppelkerbe“ eliminiert, die bei Fabrikvisieren zu finden ist. 0,160 Zoll hohe Klinge (wie werkseitig) mit abgewinkelter und gezahnter Rückseite, die Blendung reduziert. Erstreckt sich für ein saubereres Aussehen über die Rückseite des Visierkörpers und vergrößert den Sichtradius leicht. Erhältlich in zwei Kerbenbreiten, 0,110 " für Ziel- und PPC-Einsatz, plus .125" für IPSC-, IDPA- und Pin-Schießen. Eine tiefere Kerbe erleichtert die Augenausrichtung.
TECHNISCHE DATEN: 6061-T6 Aluminium, mattschwarz, eloxiert. Hitzebehandelt. .700 "(17,8 mm) Klingenbreite, .371" (9,4 mm) Höhe, .350 "(8,9 mm) Länge .085" (2,2 mm) tiefe Kerbe. Das Kit enthält eine Luftschraubenbaugruppe für die Installation. Passend für Smith & Wesson K-, L- und N-Rahmenrevolver. Funktioniert bei allen mit verstellbaren Visieren.
Mehr...
Kundenbewertungen zu BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125"
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4,8
Great choice(08.03.2013)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(05.08.2011)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(06.06.2012)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(02.08.2017)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.