Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
080561000
Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
169.9 169.9 1 EUR
Artikel-Nr.: 080561000
BROWNELLS JAMES B. MEEK BEGINNER'S KIT Wir haben James B. Meek, Autor von The Art Of Engraving, nach seinen Empfehlungen gefragt. Das schrieb er: "Vielleicht können 90% aller Schriftrollenarbeiten mit den folgenden Werkzeugen ausgeführt werden." Point Graver No. 4 schneidet die meisten Schriftrollen. Feines Detail wird mit 0 Punkt geschnitten. Messer Nr. 2 ist auch fürs Detail. Das Quadrat ist vielleicht das am weitesten verbreitete, kann auch als Spitze geschärft werden, oder ein Meißel, flache Nr. 36 und 37 und runde Nr. 50 und 54, werden für die Beschriftung auf Hochrelief benötigt. Kit enthält: Punkte - Nr. 0 und 4; Quadrat - (2) GlenSteel-Rohlinge; Wohnung - Nr. 36 und 39; Messer - Nr. 2; Rund - Nr. 50 und 54. Insgesamt 9 Gravierstifte.
169.9 EUR 0 169,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften

Versandgewicht: 0,091kg Versandhöhe: 58mm Versandbreite: 61mm Versandlänge: 173mm





Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
Newsletter