Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Halte dein Remington 700 mit dem riveted extractor kit von Brownells in Topform! 🔧 Einfache Installation für verschiedene Modelle.

BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

080000208

Eigenschaften

  • Modell:
    700
  • Waffentyp:
    Remington
  • Versandgewicht: 0,136kg
  • Versandhöhe: 25mm
  • Versandbreite: 84mm
  • Versandlänge: 150mm

Artikeldetails

US-Exportklassifizierung: 0A501.x
  • Spezifikationen:
  • Marke: Remington
  • Modell: 700
0 0 1 EUR

Nicht verfügbar.

Artikel-Nr.: 080000208

Benachrichtigt werden, sobald verfügbar? Hier klicken 54.44 EUR
0 0 1 EUR
Beschreibung Specification Kundenbewertungen Accessories

BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

Benachrichtigt werden, sobald verfügbar? Hier klicken

Beschreibung:

Original anzeigen (Englisch)

Wiederherstellung der Funktionalität für deine Remington-Gewehre!

Das REMINGTON 700 RIVETED EXTRACTOR KITS von BROWNELLS bietet eine kostengünstige und schnelle Alternative, um deine älteren Gewehre wieder zum Laufen zu bringen. Dieses Set ersetzt das nicht mehr erhältliche Remington-Fabrikteil und sorgt dafür, dass du weiterhin präzise schießen kannst.

Produktdetails:

  • Funktioniert mit allen Varianten der Remington 700, 600, 600M, 660, 742, 760, 788, 40X und XP-100.
  • Die kleine Ausführung passt auf Kaliber mit einem Durchmesser des Hülsenbodens von .378" (9.60mm), einschließlich .17 Rem., .222, .223 usw.
  • Die Installation erfordert keine Modifikation am Verschluss oder Gewehr.

Spezifikationen:

  • Material: Stahl
  • Lieferumfang: Extractor, (2) Nieten und Anleitung
  • Installation durch einen Büchsenmacher erforderlich

Hol dir das Set und stelle sicher, dass deine Remington-Gewehre in Top-Zustand bleiben!



Eigenschaften

  • Modell:
    700
  • Waffentyp:
    Remington
  • Versandgewicht: 0,136kg
  • Versandhöhe: 25mm
  • Versandbreite: 84mm
  • Versandlänge: 150mm

Artikeldetails

US-Exportklassifizierung: 0A501.x

Kundenbewertungen

Kundenbewertungen (2)

4,5 / 5
Sehr empfehlenswert

Brownells USA Just the first try, but... 18.09.2013

After checking with Brownell's techs, and getting a negative, I decided to take a chance and try this on a 7 mag. I had already determined that the factory part would not hold its shape from a failed try. The main material of the Brownell's is not quite a thou thicker than the original. The hook seems correctly located. The hook itself is about 0.010" thicker than the 7 mag. But bevels normally have to be cut anyway, so I figured that that could come down with the rest. After bevelling, I discovered that the rivet head must be fully flush, unlike "normal fit". But that was also easy with the stone still in the grinder. IT WORKED! Also, with normal instructions to "bend the ends in", the '06 head took care of that. Both bends at the end of the hook required some straightening. But I should give the standard disclaimer that your results may vary. Brownell does NOT recommend this, nor do I at this stage. I'll have to do a couple more to feel confident. But that will be my first choice next time.

Empfehlenswert

Brownells USA that was so easy 26.05.2010

My extractor start slippin off the rounds while cycling the bolt. I had about 2300 rds on it. I know better than to do a Sako mod to a Remmy bolt so I got the original style...very easy to do. Extracts round wit ease...let's see another 2300 minimum. This extactor lips is about 2 millimeters wider than original. Should last a lot longer

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben