Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Entdecke den LEO Buttstock Adapter von MESA TACTICAL für Moss 500! 🚀 Einfach zu montieren, kein Umbau nötig – perfekt für deine Waffe!

MESA TACTICAL PRODUCTS LEO BUTTSTOCK ADAPTER, MOSS 500

878405001263 100011375

Eigenschaften

  • Color: -
  • Features: -
  • Gauge:
    12 Gauge
  • Material: -
  • Modell:
    500
  • Waffentyp:
    Mossberg
  • Versandgewicht: 0,318kg
  • Versandhöhe: 42mm
  • Versandbreite: 82mm
  • Versandlänge: 294mm
  • UPC: 878405001263
  • Spezifikationen:
  • Gauge: 12 Gauge
  • Marke: Mossberg
  • Modell: 500
0 0 1 EUR

Nicht verfügbar.

Artikel-Nr.: 100011375

Herst.-Nr.: 93170

Benachrichtigt werden, sobald verfügbar? Hier klicken 124.9 EUR
0 0 1 EUR
Beschreibung Specification Kundenbewertungen Accessories

MESA TACTICAL PRODUCTS LEO BUTTSTOCK ADAPTER, MOSS 500

Benachrichtigt werden, sobald verfügbar? Hier klicken

Beschreibung:

Original anzeigen (Englisch)

Verbessere deine Schießtechnik mit dem LEO BUTTSTOCK ADAPTER!

Der LEO BUTTSTOCK ADAPTER von MESA TACTICAL PRODUCTS ist die perfekte Lösung, um deine Waffe zu optimieren. Dieser Aluminium-Receiver-Adapter wird einfach an der Rückseite des Empfängers mit dem mitgelieferten Montagematerial befestigt und erfordert keine dauerhaften Änderungen an deiner Waffe.

Produktmerkmale:

  • Adapter akzeptiert standardmäßige AR-15 Griffe und Carbine Receiver Extensions.
  • Material: A-356 T6 Aluminium, harteloxiert, dunkelgrau, matte Oberfläche.

Mit diesem Adapter bist du bestens gerüstet, um dein Schießerlebnis zu verbessern und gleichzeitig die Flexibilität deiner Ausrüstung zu erhöhen!



Eigenschaften

  • Color: -
  • Features: -
  • Gauge:
    12 Gauge
  • Material: -
  • Modell:
    500
  • Waffentyp:
    Mossberg
  • Versandgewicht: 0,318kg
  • Versandhöhe: 42mm
  • Versandbreite: 82mm
  • Versandlänge: 294mm
  • UPC: 878405001263

Kundenbewertungen

Kundenbewertungen (2)

2,5 / 5
Nicht empfehlenswert

Brownells USA Too high for a bead, too low for optics 17.03.2014

Headline says it all. Cheek weld with this adapter and an M4 style collapsable stock is too high to use a single bead and too low to use an optic.

Empfehlenswert

Brownells USA Solid Adapter for the Rem 870 Workhorse 10.12.2013

Mesa Tactical makes good kit, and this is no exception. This review will attempt to point out a few suggestions for anyone interested in this item.
FINISH: OK, but mine had a few very small mars (possibly due to a delivery screw up). For a hard use firearm this is acceptable.
BARREL BEAD: The LEO adapter is the "low" version that makes the bead "useable," but not optimal. Unless your eyes are close to your cheekweld, your eyes will be a little high for "down the barrel" sighting. This is normal for a straight stock. It is possible to shim the adapter to allow a very small downward angle to the tube and stock, but this will contribute to muzzle rise. Make sure the washer is properly seated as the washer can also affect stock angle. I am still playing with this.
GRIP NUT: I used the supplied grip nut and it interfered with the bolt securing the adapter to the receiver, making the stock higher than it should have been. Go to the hardware store and get a shorter nut (solved the problem for 15 cents).
GRIP CHOICE: If you plan to shoot heavier loads (slugs), I recommend a grip with some padding, such as the Hogue Overmolded or the Ergo. Also, if you plan to run the stock with a very short LOP (i.e., close to the adapter), then use a grip with a more vertical rake than the usual USGI to permit a more comfortable wrist angle. Finally, I had to trim the extended backstrap on an Ergo to get it to fit properly.
STOCK: I went with the Magpul MOE because the friction lock extension on the Magpul CTR interfered with my thumb when the stock was completely closed.
FINAL THOUGHT: I would not count on installing this unit and saying "done." Changes to the grip or the adapter will require removal of the stock tube, so don't locktite or stake the unit together until you are satisfied. I learned a lot about the adapter by shooting a few rounds of trap and a bunch of slugs.

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben