Designed to fit Mil-Std. 1913 scope bases, Nightforce rings are precisely manufactured to match the machined recess of a Nightforce Mil-Std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-T6 aluminum with beta series titanium crossbolts and jaws. All Nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope.
Ringheights are measured from the top of the base to the center of the ring.
Mehr...
Entwarf, Mil-Std zu passen. Die Nightforce-Ringe mit Zielfernrohrbasis von 1913 werden exakt auf die bearbeitete Aussparung eines Nightforce Mil-Std abgestimmt. 1913er Basis für perfekte Ausrichtung und Genauigkeit. Nightforce-Ringe werden im eigenen Haus nach genauen Spezifikationen vollständig aus Stahl oder aus 7075-T6-Aluminium mit Titankreuzschrauben und -backen der Beta-Serie hergestellt. Alle Nightforce-Ringe bestehen zu 100% aus Mikroradien und sind paarweise geschliffen, um eine perfekte Passform für 30-mm-Zielfernrohrrohre zu gewährleisten, damit die Ringe Ihr Zielfernrohr nicht beschädigen.
Die Ringhöhen werden von der Oberseite der Basis bis zur Mitte des Rings gemessen.
Mehr...
Kundenbewertungen zu NIGHTFORCE 30MM MEDIUM 1.0" 4 SCREW XTRM ULTRALITE RINGS DARK EARTH
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,2
Best Rings You Can Buy(15.12.2013)
Virtually all my quality scopes are mounted with Nightforce Rings. They hold heavy scopes very securely. Many other manufacturers just don't do the same. I can remove the scope off of the rail and return it with the same zero. These rings also do not mark the scope tube at all.
Nightforce 6 screw 34mm scope rings(19.05.2015)
Purchased for a Bushnell 3.5X21X50mm scope for my AR. had to change out to the extreme (1.5") rings for clearance. I have already ordered the higher rings. The quality, fit and finish are well worth the price.
For the price it's a waste.(19.01.2015)
So Nightforce! I was soooo happy to finally get these rings. All I read about on the internet was how well built these rings were, and the quality constriction that was put into them. I must have gotten duds. Along with these rings I bought Nightforce Remington SA rail, and a Nightforce TORQUE WRENCH! YAY! Right? Wrong!
I shelled out the extra cash for all of these products thinking that hey, " If I buy from the best no laping right?" Wrong! I was amazed how much lapping I had to do in order for the rings to be aligned correctly, and I cant be 100% sure but I think the rail that is also Nightforce is also misaligned. But I have to find someone with the right tools so I can have it verified.
Precision and Lightweight(15.09.2015)
I used these to mount a new scope with a 50mm objective on my new precision rifle; the perfect height for this purpose. I've used these before along with many other different rings including Burris, Leupold, Redfield, Warne, TPS, and others. These Nightforce "Ultralight" rings are my favorite. They are very light and the titanium crossbolts and ears make them extremely rigid and tough. They are machined so precisely, that I have never needed to hone them and I've never had any scope marring or tube damage. I just bought another set of these today for my AR-10.
Solid and consistent.(25.03.2016)
I have used FIVE sets of the NF Ultralites on two DEFIANCE action and on three Rem 700 actions. Scopes used range from NF 30mm and 34mm tubes and 30mm tube Sightron III's.
I have not had any issues with loosening up, despite running fairly heavy scopes.
Artikel-Nr.: 430101174 NIGHTFORCE 30MM MEDIUM 1.0" 4 SCREW XTRM ULTRALITE RINGS DARK EARTH847362023496 Entwarf, Mil-Std zu passen. Die Nightforce-Ringe mit Zielfernrohrbasis von 1913 werden exakt auf die bearbeitete Aussparung eines Nightforce Mil-Std abgestimmt. 1913er Basis für perfekte Ausrichtung und Genauigkeit. Nightforce-Ringe werden im eigenen Haus nach genauen Spezifikationen vollständig aus Stahl oder aus 7075-T6-Aluminium mit Titankreuzschrauben und -backen der Beta-Serie hergestellt. Alle Nightforce-Ringe bestehen zu 100% aus Mikroradien und sind paarweise geschliffen, um eine perfekte Passform für 30-mm-Zielfernrohrrohre zu gewährleisten, damit die Ringe Ihr Zielfernrohr nicht beschädigen.
Height:
1.0''
Oberfläche:
Dark Earth
Scope Tube Diameter:
30mm
Size:
Medium
Style:
Picatinny
Versandgewicht: 0,136kgVersandhöhe: 25mmVersandbreite: 140mmVersandlänge: 152mm
Artikel-Nr.: 430101175 NIGHTFORCE 30MM X-HIGH 1.375" 4 SCREW XTRM ULTRALITE RINGS DARK EARTH847362023502 Entwarf, Mil-Std zu passen. Die Nightforce-Ringe mit Zielfernrohrbasis von 1913 werden exakt auf die bearbeitete Aussparung eines Nightforce Mil-Std abgestimmt. 1913er Basis für perfekte Ausrichtung und Genauigkeit. Nightforce-Ringe werden im eigenen Haus nach genauen Spezifikationen vollständig aus Stahl oder aus 7075-T6-Aluminium mit Titankreuzschrauben und -backen der Beta-Serie hergestellt. Alle Nightforce-Ringe bestehen zu 100% aus Mikroradien und sind paarweise geschliffen, um eine perfekte Passform für 30-mm-Zielfernrohrrohre zu gewährleisten, damit die Ringe Ihr Zielfernrohr nicht beschädigen.
Height:
1.375''
Oberfläche:
Dark Earth
Scope Tube Diameter:
30mm
Size:
Extra High
Style:
Picatinny
Versandgewicht: 0,136kgVersandhöhe: 25mmVersandbreite: 140mmVersandlänge: 152mm
Artikel-Nr.: 430101176 NIGHTFORCE 34MM MEDIUM 1.0" 6 SCREW XTRM ULTRALITE RINGS DARK EARTH Herstellerproduktnummer: A679847362023519 Entwarf, Mil-Std zu passen. Die Nightforce-Ringe mit Zielfernrohrbasis von 1913 werden exakt auf die bearbeitete Aussparung eines Nightforce Mil-Std abgestimmt. 1913er Basis für perfekte Ausrichtung und Genauigkeit. Nightforce-Ringe werden im eigenen Haus nach genauen Spezifikationen vollständig aus Stahl oder aus 7075-T6-Aluminium mit Titankreuzschrauben und -backen der Beta-Serie hergestellt. Alle Nightforce-Ringe bestehen zu 100% aus Mikroradien und sind paarweise geschliffen, um eine perfekte Passform für 30-mm-Zielfernrohrrohre zu gewährleisten, damit die Ringe Ihr Zielfernrohr nicht beschädigen.
Designed to fit Mil-Std. 1913 scope bases, Nightforce rings are precisely manufactured to match the machined recess of a Nightforce Mil-Std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-T6 aluminum with beta series titanium crossbolts and jaws. All Nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope.
Ringheights are measured from the top of the base to the center of the ring.
Mehr...
Entwarf, Mil-Std zu passen. Die Nightforce-Ringe mit Zielfernrohrbasis von 1913 werden exakt auf die bearbeitete Aussparung eines Nightforce Mil-Std abgestimmt. 1913er Basis für perfekte Ausrichtung und Genauigkeit. Nightforce-Ringe werden im eigenen Haus nach genauen Spezifikationen vollständig aus Stahl oder aus 7075-T6-Aluminium mit Titankreuzschrauben und -backen der Beta-Serie hergestellt. Alle Nightforce-Ringe bestehen zu 100% aus Mikroradien und sind paarweise geschliffen, um eine perfekte Passform für 30-mm-Zielfernrohrrohre zu gewährleisten, damit die Ringe Ihr Zielfernrohr nicht beschädigen.
Die Ringhöhen werden von der Oberseite der Basis bis zur Mitte des Rings gemessen.
Mehr...
Kundenbewertungen zu NIGHTFORCE 30MM MEDIUM 1.0" 4 SCREW XTRM ULTRALITE RINGS DARK EARTH
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,2
Best Rings You Can Buy(15.12.2013)
Virtually all my quality scopes are mounted with Nightforce Rings. They hold heavy scopes very securely. Many other manufacturers just don't do the same. I can remove the scope off of the rail and return it with the same zero. These rings also do not mark the scope tube at all.
Nightforce 6 screw 34mm scope rings(19.05.2015)
Purchased for a Bushnell 3.5X21X50mm scope for my AR. had to change out to the extreme (1.5") rings for clearance. I have already ordered the higher rings. The quality, fit and finish are well worth the price.
For the price it's a waste.(19.01.2015)
So Nightforce! I was soooo happy to finally get these rings. All I read about on the internet was how well built these rings were, and the quality constriction that was put into them. I must have gotten duds. Along with these rings I bought Nightforce Remington SA rail, and a Nightforce TORQUE WRENCH! YAY! Right? Wrong!
I shelled out the extra cash for all of these products thinking that hey, " If I buy from the best no laping right?" Wrong! I was amazed how much lapping I had to do in order for the rings to be aligned correctly, and I cant be 100% sure but I think the rail that is also Nightforce is also misaligned. But I have to find someone with the right tools so I can have it verified.
Precision and Lightweight(15.09.2015)
I used these to mount a new scope with a 50mm objective on my new precision rifle; the perfect height for this purpose. I've used these before along with many other different rings including Burris, Leupold, Redfield, Warne, TPS, and others. These Nightforce "Ultralight" rings are my favorite. They are very light and the titanium crossbolts and ears make them extremely rigid and tough. They are machined so precisely, that I have never needed to hone them and I've never had any scope marring or tube damage. I just bought another set of these today for my AR-10.
Solid and consistent.(25.03.2016)
I have used FIVE sets of the NF Ultralites on two DEFIANCE action and on three Rem 700 actions. Scopes used range from NF 30mm and 34mm tubes and 30mm tube Sightron III's.
I have not had any issues with loosening up, despite running fairly heavy scopes.