Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
793811764642 100047158
The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
41.9 41.9 1 EUR
Artikel-Nr.: 100047158
STRIKE INDUSTRIES 17 ROUND MAGAZINE FOR GLOCK 17
Herstellerproduktnummer: SIGMAG17 793811764642 Das Strike-Magazin für GLOCK™ G17 (9 mm) ist ein hochfestes, stoßfestes, speziell gemischtes SI-Polymer-Extreme-Doppelstapel-Pistolenmagazin, das einen durchscheinenden Körper für eine schnelle Sichtbarkeit der Munition und eine speziell ausgewählte Feder für zusätzliche Zuverlässigkeit umfasst. Die Kapazität des 17+ runden durchscheinenden Magazinkörpers ist mit strategisch platzierten strukturierten und nicht strukturierten Oberflächen ausgelegt. Strukturiert, wo es nötig ist, um den Glanz des Messings zu reduzieren und ein positives Gefühl zu verleihen. Nicht texturiert auf einer Seite für ultraklare Sichtbarkeit der Rundenzahl und was im Inneren vor sich geht. Der Mag-Körper ist nicht nur durchscheinend, es gibt auch Eckenrundungsschnitte, um Ihnen alternative Winkel zu geben, um zu sehen, wie viele Sie für den Kampf übrig haben. Magazinfreigabeschnitte sind auf beiden Seiten des SI-Magazins konzipiert und mit rechten, linken und beidhändigen Freigabeeinstellungen kompatibel, die auf werkseitigen GLOCK ™ GEN3-GEN5-Rahmen zu finden sind. Das Strike-Magazin für GLOCK™ G17 verfügt über einen integrierten Hakenschlitz speziell für die Stahlverriegelungsplatte der SI Extended Magazine Plate (EMP) für zusätzliche Sicherheit bei der Kapazitätserhöhung, aber die mitgelieferte Grundplatte hat auch herausragende Eigenschaften. Seitenschnitte an der Grundplatte erleichtern das Greifen. Bemalbare dreieckige Markierungen oben auf dem Magazinkörper, um zu erkennen, dass das Magazin beim Nachladen in der richtigen Richtung ist. ID-Marker an der Unterseite der Grundplatte ermöglichen es Ihnen, Ihre Magazine individuell zu markieren und sicherzustellen, dass niemand mit Ihren Sachen nach Hause geht. Zusammen mit den Seitenschnitten hat die Grundplatte auch eine zusätzliche Frontlippe für eine vergrößerte Standfläche, um den Stand des Magazins zu unterstützen und ihm ein wenig Balance zu geben. Die mitgelieferte Grundplatte ist ein werkzeugloses Demontagedesign zum schnellen und einfachen Entfernen durch einfaches Drücken mit dem Fingernagel. Das Strike-Magazin für GLOCK™ G17 (9 mm) ist vollgepackt mit Funktionen als alternative Option, die die Wände Ihres Tresors und Ihrer Waffentasche auskleiden sollten.KOMPATIBEL: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Erweiterte Magazinplatte (EMP) HINWEIS: Nicht für den Verkauf nach Kalifornien, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York , Einwohner von Vermont und Washington DC aufgrund von 10- oder 15-Runden-Staatsgesetzen. Der Bestellvorgang zeigt KEINE verfügbare Versandart an. LÄNGE 125,55 mm BREITE 28,5 mm HÖHE 41,88 mm Produktmerkmale: -Kapazität: 17+ Schuss -Durchscheinender Magazinkörper mit strategisch platzierten strukturierten und nicht strukturierten Oberflächen -Strukturiert, wo es erforderlich ist, um den Glanz von Messing zu reduzieren und ein positives Gefühl zu verleihen -Nicht strukturiert eine Seite für ultraklare Sichtbarkeit der Patronenzählung -Rundzählungsschnitte an den Ecken bieten alternative Winkel, um die Munitionszählung von der Seite oder der Rückseite des Magazinkörpers aus zu sehen -Erhöhte Magazinfederstärke für Zuverlässigkeit -Beidhändige Magazinauslöseschnitte -Seitenschnitte an der Grundplatte erleichtern das Greifen -Lackierbare dreieckige Markierungen oben auf dem Magazinkörper, um zu helfen, das Magazin beim Nachladen in die richtige Richtung zu weisen -ID-Markierungen auf der Unterseite der Grundplatte -Frontlippe der Grundplatte für mehr Platzbedarf im Stehen -Mitgelieferte Grundplatte ist ein werkzeugloses Demontagedesign für schnelles und einfaches Entfernen -Eingebauter Hakenschlitz speziell für SI Extended Magazine Plate (EMP) Stahlverriegelungsplatte für zusätzliche Sicherheit bei Kapazitätserhöhung -Hi Schlagfestes, speziell gemischtes SI Polymer Extreme mit hoher Schlagfestigkeit
41.9 EUR 0 41,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Kaliber: 9 mm Luger Kapazität: 17-Round Marke: Glock Material: Polymer Modell: 17 Oberfläche: Translucent Menge: 1

Eigenschaften

Kaliber: 9 mm Luger Kapazität: 17-Round Marke: Glock Material: Polymer Modell: 17 Oberfläche: Translucent Versandgewicht: 0,045kg Versandhöhe: 32mm Versandbreite: 102mm Versandlänge: 191mm

Artikeldetails

US-Exportklassifizierung: 0A501.d



The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
Newsletter