Ihr Warenkorb ist leer.

Warenkorb

+43 2235 21555

Newsletter abonnieren

EGW
1911 COMPETITION SEAR

841370100347 296100002

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

Ultra-hard sear gives a clean-breaking, light-feeling trigger pull with little or no time-consuming stoning—can be installed straight out of the package in many cases. Precision CNC-machined from tool steel barstock, then ground for precise geometry to ensure correct sear angle for full hammer/sear engagement. Hardened to Rc 55 for exceptionally long life, so your trigger job lasts longer.

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Mehr...

Ultraharter, bearbeiteter Werkzeugstahl-Abzug für lang anhaltende Abzüge in Match-Qualität

Ultra-harter Abzug sorgt für einen sauberen Abzug, der sich leicht anfühlt, und erfordert nur wenig oder gar keine zeitaufwendige Steinigung. In vielen Fällen kann er direkt aus der Verpackung installiert werden. Präzise CNC-Bearbeitung aus Werkzeugstahl-Stangenmaterial, anschließend für eine präzise Geometrie geschliffen, um den richtigen Anschnittwinkel für einen vollen Hammer- / Anschnittangriff zu gewährleisten. Für eine außergewöhnlich lange Lebensdauer auf Rc 55 gehärtet, sodass Ihr Auslösejob länger dauert.

SPEZIFIKATIONEN: Bearbeiteter Werkzeugstahl in Weiß. Passt nur für 1911 Auto.

Mehr...

Kundenbewertungen zu EGW 1911 AUTO SEAR

Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 5

Great Product (18.04.2011)

I installed an EGW sear in my 1911 Springfield Armory project gun and I couldn't be happier with the result. I bought the sear along with the Brownells sear jig and an extra-fine stone.
After stoning in the jig and cutting the relief angle, the sear installed in a snap, passed function testing, and fired 150 rounds...superb performance! Used with a Wilson ultra-light hammer with hooks @ 0.20.

EGW 1911 Auto Sear (11.08.2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12.10.2011)

The best sear to ever hit the market. As with all EGW products they do it right the first time and offer only one grade product at a very reasonable price. Not three sears and hammers like the big name smiths with economy, mid range and pre bullet proof or hard core as these are the best. Perfect hardness and hold an edge for the life of the gun and the next one to follow with 100000s rounds +. Can be used with no relief and short hooks or a relief angle and a well tuned matching EGW hammer for the best of the best combination.

Best sear on the market (26.01.2012)

I've used various sears, but this one is the best. It is not the lightest, but it is the hardest. This one will last forever. I recommend this sear for any trigger weight down to about 2 lbs., so this is the one for you probably 99% of the time.

Highly Advise, excellent sear! (24.05.2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16.08.2012)

I bought this sear based on the feedback I read. Everything was true. This is a quality part. Perfect dimensions, The breakaway angle is already cut, the contact face is polished and super hard. I matched this up with my favorite hammer, Wilson's Ultra Light Match Hammer at 20/1000ths. I easily got a safe, 2 1/2 lb. trigger on my Springfield TRP. Impressive product from EGW.

Excellent Sear (13.04.2013)

Replaced my factory Colt XSE with this sear and the results are amazing. This sear came polished with the correct angles and NO work to be done. My trigger pull fell to 3.5 lbs. In addition you get the very hard steel that will last many years and not lose its sear angles.
Thumb safety fit back in perfect with no adjustment needed.
Great Sear, I highly recommend it!

Nothing better... (16.06.2013)

Title says it all. Perfect consistency in finish and dimension means I can count on the EGW sear to fit exactly how I expect it to, without even having it in my hands. More than long enough to use with a TR sear jig if you choose.
Had the hardness independently checked... and it's spot on. I keep 3-4 on hand at all times... and if I measured the nose length on all 4, I doubt they'd be more than .0002" of each other in variance. Iv'e actually been using these for over 15 years, just got around to reviewing. Perfect compliment to the ball head disco.

This is THE ONE !! (25.01.2014)

IF you have no apptitude for polishing sear angles (like me)this sear is as good as it gets. I tried using an STI but the safety pad was WAY too big and I got sear bounce. The EGW dropped right in and coupled with a Colt sear spring got me a clean 3lb trigger on my SA Loaded.Best 1911 part I've ever bought,period.

The Industry's Finest Sear! (10.07.2015)

My business specializes in repair, customization and custom builds of 1911s. The geometry, fit and function of this Sear is superior to all others on the market, and I've tried them all! As stated earlier in another write up, best results will be obtained with mating to either an EGW Hammer, or to another parts manufacturer's 1911 Hammer, which uses the same dimensional geometry as EGW's (Hint: Their name begins with the letter "A"). The EGW Sear's heat treating and finish is without peer!! An extraordinary value!!

Quality sear (04.08.2015)

The stock trigger pull on my Ruger CMD was about 5.5lbs with some creep and grittiness. The EGW sear dropped in with no fitting and combined with a 19lb mainspring and a Colt sear spring I have a clean break with zero creep and its much lighter. I'm buying another to install in my Springfield.

Drop in, no smithing, much smoother pull (19.11.2015)

Remington 1911 R1. Stock trigger had a rough pull. Before buying the full trigger job kit, I wanted to try a simpler solution. The EGW sear dropped right in and made a major improvement. Zero smithing required.

On a side note, I also tried installing the series 80 to 70 conversion. That didn't do it, but the new sear did.

EGW they mean what they say (13.08.2017)

I look at what's out there and with out mentioning any names its not so much the product as the customer service, and I understand that people are very busy in their smithing and machining work that there is little time for chet chat but when I ever needed advice on a product or have a problem and leave a message they always come back with an answer ready to help, yup EGW they get the job done, thanks EGW.

Very nice 1911 sear (26.08.2018)

This is a very nice and tough sear. Out of the bag, it requires virtually zero stoning, or other fitting. I've used this in a re-build, with new trigger, disconnect, hammer and sear spring, and it really makes the trigger just right. No slop, no creep, nice clean break. Hope that info helps!

Lesen Sie 14 weitere Bewertungen bei brownells.com

48.9 48.9 1 EUR

Artikel-Nr.: 296100002
EGW 1911 AUTO SEAR
Herstellerproduktnummer: 10040 841370100347 Ultra-harter Abzug sorgt für einen sauberen Abzug, der sich leicht anfühlt, und erfordert nur wenig oder gar keine zeitaufwendige Steinigung. In vielen Fällen kann er direkt aus der Verpackung installiert werden. Präzise CNC-Bearbeitung aus Werkzeugstahl-Stangenmaterial, anschließend für eine präzise Geometrie geschliffen, um den richtigen Anschnittwinkel für einen vollen Hammer- / Anschnittangriff zu gewährleisten. Für eine außergewöhnlich lange Lebensdauer auf Rc 55 gehärtet, sodass Ihr Auslösejob länger dauert.

48.9 EUR 114 48,90 € *

Lieferzeit ca. 14-21 Werktage.
Mehr als 10 Stk. im Lager USA

Eigenschaften: Marke: 1911 Modell: Government, Commander, Officers

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Marke: 1911 Modell: Officers,Commander,Government Versandgewicht: 0,005kg Versandhöhe: 8mm Versandbreite: 76mm Versandlänge: 124mm

Artikeldetails

US-Exportklassifizierung: 0A501.c

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Mehr...

Ultraharter, bearbeiteter Werkzeugstahl-Abzug für lang anhaltende Abzüge in Match-Qualität

SPEZIFIKATIONEN: Bearbeiteter Werkzeugstahl in Weiß. Passt nur für 1911 Auto.

Mehr...

Kundenbewertungen zu EGW 1911 AUTO SEAR

Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 5

Great Product (18.04.2011)

EGW 1911 Auto Sear (11.08.2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12.10.2011)

Best sear on the market (26.01.2012)

Highly Advise, excellent sear! (24.05.2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16.08.2012)

Excellent Sear (13.04.2013)

Nothing better... (16.06.2013)

This is THE ONE !! (25.01.2014)

The Industry's Finest Sear! (10.07.2015)

Quality sear (04.08.2015)

Drop in, no smithing, much smoother pull (19.11.2015)

EGW they mean what they say (13.08.2017)

Very nice 1911 sear (26.08.2018)

Lesen Sie 14 weitere Bewertungen bei brownells.com

Kunden kauften auch
Alternativen

WILSON COMBAT AMBIDEXTROUS SAFETY, S/S
1911 HIGH-RIDE AMBIDEXTROUS THUMB SAFETY

WILSON COMBAT

Auf Lager

97,90 € * 94,90 € - 97,90 €*

Sicherungen

1911 HD LIGHTENED HAMMER - EGW HD LIGHTENED HAMMER

EGW HD LIGHTENED HAMMER
1911 HD LIGHTENED HAMMER

EGW

Auf Lager

112,90 € * 112,90 € - 131,90 €*

Hämmer

ED BROWN STAINLESS REBUILD KIT
1911 REBUILD KIT

ED BROWN

Auf Lager

36,90 € * 36,90 € - 39,90 €*

Rahmenstifte

ED BROWN STAINLESS PLUNGER TUBE
1911 PLUNGER TUBE

ED BROWN

Auf Lager

34,90 € * 32,90 € - 34,90 €*

Arretierstiftführungsrohre

NOWLIN MATCH SEAR SPRING
1911 MATCH GRADE SPRING

NOWLIN

Auf Lager

17,10 € *

Abzugstangenfedern

Anmeldung

Kennwort vergessen?
Registrieren

Social Media

Site Map

Produkt Gruppen

Bestellen

Kundenservice

Willkommen

Willkommen bei brownells.at, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in Austria!

Unser Versprechen

Wenn Sie gerne schießen und das Arbeiten mit Waffen mögen, ganz gleich, ob als Hobby oder beruflich oder einfach nur ein sportlich ambitionierter Waffenbesitzer sind, bei uns sind Sie richtig! Keine Extrakosten für Zoll, Importgenehmigung und kein Mindestbestellwert!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Enthusiasten, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertigen Waffenteilen und dem Zubehör von Brownells.

Sie finden bei uns mehr als 60.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning Ihrer Waffen.