Eigenschaften
- Caliber: -
- Cavities: 2
- Diameter (in): 0.379
- Geschossgewicht (Grains): 250
- Versandgewicht: 0,396kg
- Versandhöhe: 51mm
- Versandbreite: 66mm
- Versandlänge: 269mm
- UPC: 734307903244
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 430108475
Herst.-Nr.: 90324
734307903244 Alle Lee Formblöcke sind aus Aluminium gefertigt, aufgrund seiner außergewöhnlichen Gießqualitäten. Alle Formhohlräume sind CNC-bearbeitet für unvergleichliche Rundheit und Größenkontrolle. Alle Hohlbasisformen sind nur einseitig, da sie einen selbstzentrierenden, automatischen Kernstift für die schnellstmögliche Formgebung haben. Alle Formen enthalten Griffe und Spritzplatten.
Kostenloser Versand ab 299,00 €.
Lieferzeit ca. 14-21 Werktage.
Die 2 CAVITY RIFLE BULLET MOLDS von LEE PRECISION sind die ideale Wahl für jeden, der seine eigenen Geschosse im Kaliber 35-55 (0.379") mit einem Gewicht von 250 Gramm und flacher Nase herstellen möchte.
Alle Lee Mould-Blöcke sind aus Aluminium gefertigt, was hervorragende Gusseigenschaften garantiert. Die Mould-Hohlräume sind CNC-bearbeitet, um eine unvergleichliche Rundheit und Größenkontrolle zu gewährleisten. Beachte, dass alle Hohlbasis-Moulds nur eine Kavität haben, da sie einen selbstzentrierenden, automatischen Kernstift besitzen, der das Gießen so schnell wie möglich macht.
Mit diesen Moulds bist du bestens ausgestattet, um hochwertige Geschosse für dein Gewehr zu gießen. Lass deiner Kreativität freien Lauf und genieße das Schießen mit selbstgemachten Munition!
Great stuff 29.11.2015
I bought this, along with many others as I have just now got into casting. This is a very lightweight mould, very accurate one to boot. Casting with nothing but wheel weights, this drops just a grain or two heavier than specified, however, it's right on for size. This takes a few minutes to warm up, and my rifle moulds like to be hot (pistol not so much).
Most I have are .309 diameter, and they all drop at .310 and .311. You can barely feel them go through the sizer (also Lee), making the wasted lead to a minimum. These are great to learn on, and having the handles included for $20, you cannot beat that anywhere.
The one drawback to these is they get really hot really fast. An easy fix is to have a sponge handy, dab it between pours, and the temperature stays where it should.
To break in, I followed the recommendation to soak them in mineral spirits to clean them from the factory, and smoke them with a match. I have never had any stick beyond a tap or two. I would highly recommend these for beginners, and I can't comment on the longevity, but from what I heard, they last longer than you...
Great stuff 29.11.2015
I bought this, along with many others as I have just now got into casting. This is a very lightweight mould, very accurate one to boot. Casting with nothing but wheel weights, this drops just a grain or two heavier than specified, however, it's right on for size. This takes a few minutes to warm up, and my rifle moulds like to be hot (pistol not so much).
Most I have are .309 diameter, and they all drop at .310 and .311. You can barely feel them go through the sizer (also Lee), making the wasted lead to a minimum. These are great to learn on, and having the handles included for $20, you cannot beat that anywhere.
The one drawback to these is they get really hot really fast. An easy fix is to have a sponge handy, dab it between pours, and the temperature stays where it should.
To break in, I followed the recommendation to soak them in mineral spirits to clean them from the factory, and smoke them with a match. I have never had any stick beyond a tap or two. I would highly recommend these for beginners, and I can't comment on the longevity, but from what I heard, they last longer than you...
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.