Eigenschaften
- Diameter (in): -
- Die Style: -
- Kaliber:
7 mm Mauser (7 x 57 mm Mauser)
- Versandgewicht: 0,68kg
- Versandhöhe: 56mm
- Versandbreite: 130mm
- Versandlänge: 218mm
- UPC: 757253007309
Nicht verfügbar.
Artikel-Nr.: 749007392
Herst.-Nr.: U04382
Benachrichtigt werden, sobald verfügbar? Hier klicken 314.9 EURDie ULTRA™ MICROMETER SEATER DIES von FORSTER PRODUCTS, INC. bieten dir die Möglichkeit, immer wieder konzentrische Patronen herzustellen. Diese wiederlade Dies sind von ausgezeichneter Qualität und aus hochwertigem Stahl gefertigt, der sorgfältig mit engen Toleranzen bearbeitet wird.
Mit den Forster Ultra Seaters wird das Feintuning deiner Geschosse auf die Züge deines Laufes zum Kinderspiel!
7 mm Mauser (7 x 57 mm Mauser)
Good die but not for VLD bullets 12.05.2018
I have several of these Forster Ultra Micrometer Seating Dies in various calibers. All have worked very well with standard weight for caliber bullets of conventional shape. I bought this die to seat heavy for caliber bullets in a .223 bolt gun. Although the 80 grain Sierra Match King bullet is not technically a VLD design the seating stem of this die would not engage the bullet consistently. Seating depths would vary by a much as 10 thousandths of an inch. Sometimes the bullet tip would bottom out inside the cup of the seating stem. After diagnosing the problem I discovered Forster does not have a VLD stem available. I returned this die to Brownells and purchased another manufacturer's die that has a VLD stem. This is a very good seating die but perhaps not appropriate for long profile bullets.
Good but needed some work 04.05.2017
I use this to load for my AR, a Ruger Ranch Rifle and a TC Encore. It works fine but when I first received it some work was needed. I noticed that the sliding sleeve would catch partway up and found that the roll marking on the bottom of the sleeve was raised sufficiently to drag on the outer housing. It was significant and I have no doubt it would have caused issues. Also, the seater plug had a ridge around the bottom where the bullet entered that cause significant drag in the sleeve. A bit of careful stoning made things better although the seater still feels a bit rough in the sleeve. Roll marking after precision machining on the sleeve seems like a real bad idea.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.