A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Entdecke die ultimative Optik-Lösung für dein AK-47!
Die AK SCOUT MOUNT MODE M1-B von ULTIMAK ist die perfekte Plattform für deine Premium-Optiken. Mit der wachsenden Beliebtheit der AK-basierten Gewehre bei Dreigewinnt-Wettbewerben, ist die Notwendigkeit eines handlichen, leichten und absolut zuverlässigen Hochgeschwindigkeits-Visiersystems entstanden. Der UltiMAK M1-B Optik-Mount ist hier, um diese Anforderungen zu erfüllen.
Produktmerkmale:
- Picatinny-Schiene unterhalb der Eisenvisierachse – die niedrigste Optikmontage für die AK.
- Ermöglicht die Nutzung der Optik ohne einen Wangenauflage und behält den gewohnten Halt.
- Co-Witnessing mit einem tubular Reflex Sight – die Möglichkeit, die Eisenvisiere direkt durch ein 1x Visier zu nutzen.
- Leichtgewicht – fügt weniger als eine Unze zum Gewicht des Gewehrs hinzu.
- Verbesserte Zielerfassung durch die vordere Positionierung der Optik.
- Seltenes Entfernen erforderlich, um das Gewehr zu reinigen – kein Verlust der Null.
- Kompatibel mit einer Vielzahl von AK-Gewehrvariationen.
Der UltiMAK Optics Mount ersetzt das originale Stahl-Gasrohr und die obere Handschutzschale, wodurch die Installation die leichteste der Welt ist. Zudem wird er direkt am Lauf befestigt, was maximale Stabilität, Genauigkeit und optimale Bohrausrichtung gewährleistet. Er besteht aus solidem, einteiligem 6061-T6 hart anodisiertem Aluminium und wird mit 4140 Stahlklammern, Schrauben, einem Inbusschlüssel und einer Anleitung geliefert – ganz ohne Waffenbau.
Technische Spezifikationen:
- Material: 6061-T6 Aluminium, schwarz, matte Oberfläche.
- Länge: 6-7/8" (17,5 cm).
- Gewicht: 6.7 oz. (189 g).
- Passt auf alle 7.62x39 Kalibergewehre mit originalen Gasrohren ohne seitliche Gasportlöcher.
- Installation kann geringfügige Anpassungen am Handschutz erfordern.
Mit der AK SCOUT MOUNT MODE M1-B von ULTIMAK bist du bestens gerüstet für präzises Zielen und optimale Leistung. Hol dir jetzt dein Stück Präzision!