Eigenschaften
- Color:
Black
- Material: -
- Style:
Rifle Sling Adapter
- Versandgewicht: 0,023kg
Nicht verfügbar.
Artikel-Nr.: 080000658
Benachrichtigt werden, sobald verfügbar? Hier klicken 69.9 EURDer Low-Profile-Adapter bietet deinem AR-15/M16 mit A2-Style-Schaft die Bequemlichkeit und Vielseitigkeit eines Single-Point-Clip-On Sling/Mash-Hook/H&K-Sling-Montagezubehörs.
Präzise aus 4140-Kohlenstoffstahl gefertigt, sorgt dieser Adapter für zusätzliche Stärke. Mit extra Metall am Befestigungshaken, sodass der Adapter auch bei starkem Ziehen oder Drehen des Slings nicht bricht.
Es sind keine dauerhaften Änderungen am Gewehr erforderlich: Entferne einfach den Schaft, schiebe den Adapter über das Empfängerverlängerungsrohr und baue den Schaft mit dem mitgelieferten Spacer und dem verlängerten Schaftschraube wieder ein.
Black
Rifle Sling Adapter
installation 28.06.2018
the kit assumes you are altering a carbine buffer tube. Instructions refer to the extra spacer that one would need when installing an A2 fixed stock on a carbine rifle(16" buffer tube is shorter).... I installed this on standard 20 inch rifle buffer tube. Unfortunately, the screw that was included in the kit was too long for the rifle buffer tube and will only work if you're modifying a carbine model with a carbine buffer tube and needed a spacer to install A2 stock... fortunately, I was able to use the existing screw and reinstall the stock, but would like one a little shorter than the one provided( or an extra screw for that option) to accommodate standard rifle buffer tube. I might have to cut the screw provided order to get maximum threads... even though only adds up 5/16 of an inch... would like to have that extra threads in stock that holds it all together.
Great POA 15.09.2016
The adapter looks very well made and sturdy, just the same as the other reviews state. The only thing I would change about it is not with the adapter but with the hardware. I installed mine on an olympic arms lower and the included spacer on mine kept rattling around some. I had to make a shim out of a 1/2" flat washer. It took some time but I was able to get it to just the right tolerances that it would hold both the spacer and the adapter tight on the butt stock. With the slight variances in tolerance from rifle to rifle, that is to be expected and I do not fault Brownells at all. Maybe they could include a couple other spacers that differ by a few hundredths of an inch in length. I would have paid $5 more just for that convenience. Otherwise, excellent product and highly recommend!
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.