Eigenschaften
- Modell: High Power
- Waffentyp: Browning
- Versandgewicht: 0,023kg
- Versandhöhe: 15mm
- Versandbreite: 102mm
- Versandlänge: 160mm
- UPC: 000000002813
Artikeldetails

Nicht verfügbar.
Artikel-Nr.: 206000013
Herst.-Nr.: CS0281
Benachrichtigt werden, sobald verfügbar? Hier klicken 194.9 EURDas vierteilige Zielset ermöglicht eine präzise Anpassung für die Sear-Engagement, um das Abzugsgefühl und die Funktion erheblich zu verbessern. Alle Sets enthalten:
Das CS281 verfügt über einen standardmäßigen, runden Hammer mit schmalen, gefasten Kanten, um ein Verhaken am Schlitten zu vermeiden. Das CS285 hat einen neuen, No-Bite, gefasten Ringhammer mit tiefem, konturiertem Rücken für weniger Gewicht und reduzierte Verriegelungszeit. Die gehärtete Werkzeugstahlscharniert ersetzt das werkseitige, gegossene Teil; sie lässt sich leicht polieren und behält ihre Winkel für tausende von Schüssen. Eine Anpassung durch einen Büchsenmacher wird empfohlen.
Passt für Browning Hi-Power 9mm und .40 S&W.
21 lbs is too low 26.08.2017
The hammer and sear themselves are great. Look good and are clear improvements in quality and function.
However, the mainspring/hammer spring that are supplied with these kits is way too low. Every gunsmith and hi-fan I have talked to has told me that the 21 lbs main spring is so low that it can cause problems with frame battering.
Also, even C&S told me that under no circumstances use +P ammo and to avoid even foreign produced ammo because it's a little more hot than SAAMI specs. Moreover, they told me that you MUST use a heavier 18.5 lbs recoil spring to keep slide velocities in spec.
I have shot my gun with these parts using the heavier recoil spring and it functions well. However, I am so gravely concerned with the long term effects on the frame that I going to increase the weight of the hammer spring.
C&S makes this kit, but with a heavier mainspring. Buy that one and avoid my mistake.
Well worth the money 21.08.2014
My comment would be basically the same as Jim B's. These parts require the services of a knowledgeable gunsmith to install them, but it's well worth the cost. My gunsmith tried to do a trigger job with the original hammer and sear, but they wouldn't hold an edge. He replaced them with these parts, and not only is hammer bite largely a thing of the past, I've got the cleanest Hi Power trigger I've ever experienced, breaking right at 4.0 lbs like I asked.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.