SEAL 1™ CLP PLUS® is a non-toxic bio-based cleaner, lubricant, protectant. Liquefies carbon on contact Fouling residues - wipes clean after two - three applications / seasonings Subsequent cleaning times are greatly reduced Micro protective barrier inhibits residue buildup such as copper, lead, sand, dust and dirt Bore Cleaning: Apply liberally to bore brush run brush up and down bore numerous times. Apply liberally to cotton bore patch or use pre-saturated SEALSkinz™ Using a tight fitting jag patch combination run patch up and down bore two or three times. Repeat until patch comes clean. Run dry patch up and down bore to remove any excess. After two or three applications in most cases you will experience an increase in muzzle velocity. All Other Cleaning: Apply liberally and scrub until clean. Wipe clean with cloth or bore cleaning patch. Storage and Protection: For fastest result it is best to treat you gun while it is warm. Apply SEAL 1 CLP PLUS® to all surfaces and let soak in. Wipe with clean cloth to remove any excess After two or three applications you should only need to wipe down with a SEALSkinz™ Cloth or repeat this process occasionally.
Mehr...
SEAL 1™ CLP PLUS® ist ein ungiftiger biobasierter Reiniger, Schmierstoff und Schutz. Verflüssigt Kohlenstoff bei Kontakt Verschmutzungsrückstände – abwischbar nach zwei bis drei Anwendungen / Nachwürzen Nachfolgende Reinigungszeiten werden stark verkürzt Mikro-Schutzbarriere verhindert die Ansammlung von Rückständen wie Kupfer, Blei, Sand, Staub und Schmutz Bohrungsreinigung: Großzügig auf die Bohrungsbürste auftragen und aufbürsten und unzählige Male nach unten gebohrt. Großzügig auf Baumwoll-Bohrungsflicken auftragen oder vorgetränktes SEALSkinz™ verwenden. Mit einer eng anliegenden Zacken-Patch-Kombination den Flicken zwei- oder dreimal auf und ab führen. Wiederholen, bis der Flicken sauber ist. Lassen Sie den trockenen Flicken in der Bohrung auf und ab laufen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen werden Sie in den meisten Fällen eine Erhöhung der Mündungsgeschwindigkeit feststellen. Alle anderen Reinigungen: Großzügig auftragen und schrubben, bis sie sauber sind. Mit einem Tuch oder Laufreinigungspflaster abwischen. Aufbewahrung und Schutz: Für ein schnelles Ergebnis ist es am besten, Ihre Waffe zu behandeln, während sie warm ist. Tragen Sie SEAL 1 CLP PLUS® auf alle Oberflächen auf und lassen Sie es einziehen. Mit einem sauberen Tuch abwischen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen sollten Sie nur mit einem SEALSkinz™ Tuch abwischen müssen oder diesen Vorgang gelegentlich wiederholen.
Mehr...
Kundenbewertungen zu SEAL 1 CLP PLUS PASTE 4OZ JAR
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4,5
talked to these guys at Shot, 10 Stars(26.01.2015)
Made my cleaning time cut in half. Best cleaner I have seen in years. The product is great and the people are even better.
Love this stuff(29.06.2015)
This is the best stuff that I have ever used to clean my firearms, it is a one stop show, I only need this one product to clean, lubricate and protect my firearms from all of the rain, snow and sun that I am in!
Lube for Hot Dry Arizona - Seal1(13.08.2015)
Living and shooting in HOT Arizona can cause function reliability. I use a small brush and apply Seal1 to the lube areas. Getting a weapon out after sitting 6 months, I rack the slide/bolt couple of times and the weapon is ready to go. This stuff doesn't dry out like normal oils.
Meh. Just an average CLP.(18.08.2015)
I've used SEAL1 for 12-months. It really only shines as a lubricant in a hot, humid environment. The more you shoot it, the more it heats up, the more it lubricates and protects. I agree it's easier to use than other "bio-based" CLP products like FrogLube. HOWEVER, it DOES NOT clean or eliminate copper fouling. I also had problems using it with a 1911 in a Midwest climate. It will gunk-up the action in the extreme cold and changes from smelling like bubble-mint bubble gum to smelling like a dirty frying pan. I suppose its good enough for the average plinker. And I appreciate its made here in the USA by a retired Navy SEAL but I think this product needs a bit more tweaking if its to survive in the overcrowded CLP market.
Artikel-Nr.: 100015772 SEAL 1 CLP PLUS PASTE 4OZ JAR Herstellerproduktnummer: SP-4794504183306 SEAL 1™ CLP PLUS® ist ein ungiftiger biobasierter Reiniger, Schmierstoff und Schutz. Verflüssigt Kohlenstoff bei Kontakt Verschmutzungsrückstände – abwischbar nach zwei bis drei Anwendungen / Nachwürzen Nachfolgende Reinigungszeiten werden stark verkürzt Mikro-Schutzbarriere verhindert die Ansammlung von Rückständen wie Kupfer, Blei, Sand, Staub und Schmutz Bohrungsreinigung: Großzügig auf die Bohrungsbürste auftragen und aufbürsten und unzählige Male nach unten gebohrt. Großzügig auf Baumwoll-Bohrungsflicken auftragen oder vorgetränktes SEALSkinz™ verwenden. Mit einer eng anliegenden Zacken-Patch-Kombination den Flicken zwei- oder dreimal auf und ab führen. Wiederholen, bis der Flicken sauber ist. Lassen Sie den trockenen Flicken in der Bohrung auf und ab laufen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen werden Sie in den meisten Fällen eine Erhöhung der Mündungsgeschwindigkeit feststellen. Alle anderen Reinigungen: Großzügig auftragen und schrubben, bis sie sauber sind. Mit einem Tuch oder Laufreinigungspflaster abwischen. Aufbewahrung und Schutz: Für ein schnelles Ergebnis ist es am besten, Ihre Waffe zu behandeln, während sie warm ist. Tragen Sie SEAL 1 CLP PLUS® auf alle Oberflächen auf und lassen Sie es einziehen. Mit einem sauberen Tuch abwischen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen sollten Sie nur mit einem SEALSkinz™ Tuch abwischen müssen oder diesen Vorgang gelegentlich wiederholen.
SEAL 1™ CLP PLUS® is a non-toxic bio-based cleaner, lubricant, protectant. Liquefies carbon on contact Fouling residues - wipes clean after two - three applications / seasonings Subsequent cleaning times are greatly reduced Micro protective barrier inhibits residue buildup such as copper, lead, sand, dust and dirt Bore Cleaning: Apply liberally to bore brush run brush up and down bore numerous times. Apply liberally to cotton bore patch or use pre-saturated SEALSkinz™ Using a tight fitting jag patch combination run patch up and down bore two or three times. Repeat until patch comes clean. Run dry patch up and down bore to remove any excess. After two or three applications in most cases you will experience an increase in muzzle velocity. All Other Cleaning: Apply liberally and scrub until clean. Wipe clean with cloth or bore cleaning patch. Storage and Protection: For fastest result it is best to treat you gun while it is warm. Apply SEAL 1 CLP PLUS® to all surfaces and let soak in. Wipe with clean cloth to remove any excess After two or three applications you should only need to wipe down with a SEALSkinz™ Cloth or repeat this process occasionally.
Mehr...
SEAL 1™ CLP PLUS® ist ein ungiftiger biobasierter Reiniger, Schmierstoff und Schutz. Verflüssigt Kohlenstoff bei Kontakt Verschmutzungsrückstände – abwischbar nach zwei bis drei Anwendungen / Nachwürzen Nachfolgende Reinigungszeiten werden stark verkürzt Mikro-Schutzbarriere verhindert die Ansammlung von Rückständen wie Kupfer, Blei, Sand, Staub und Schmutz Bohrungsreinigung: Großzügig auf die Bohrungsbürste auftragen und aufbürsten und unzählige Male nach unten gebohrt. Großzügig auf Baumwoll-Bohrungsflicken auftragen oder vorgetränktes SEALSkinz™ verwenden. Mit einer eng anliegenden Zacken-Patch-Kombination den Flicken zwei- oder dreimal auf und ab führen. Wiederholen, bis der Flicken sauber ist. Lassen Sie den trockenen Flicken in der Bohrung auf und ab laufen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen werden Sie in den meisten Fällen eine Erhöhung der Mündungsgeschwindigkeit feststellen. Alle anderen Reinigungen: Großzügig auftragen und schrubben, bis sie sauber sind. Mit einem Tuch oder Laufreinigungspflaster abwischen. Aufbewahrung und Schutz: Für ein schnelles Ergebnis ist es am besten, Ihre Waffe zu behandeln, während sie warm ist. Tragen Sie SEAL 1 CLP PLUS® auf alle Oberflächen auf und lassen Sie es einziehen. Mit einem sauberen Tuch abwischen, um überschüssiges Material zu entfernen. Nach zwei oder drei Anwendungen sollten Sie nur mit einem SEALSkinz™ Tuch abwischen müssen oder diesen Vorgang gelegentlich wiederholen.
Mehr...
Kundenbewertungen zu SEAL 1 CLP PLUS PASTE 4OZ JAR
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4,5
talked to these guys at Shot, 10 Stars(26.01.2015)
Made my cleaning time cut in half. Best cleaner I have seen in years. The product is great and the people are even better.
Love this stuff(29.06.2015)
This is the best stuff that I have ever used to clean my firearms, it is a one stop show, I only need this one product to clean, lubricate and protect my firearms from all of the rain, snow and sun that I am in!
Lube for Hot Dry Arizona - Seal1(13.08.2015)
Living and shooting in HOT Arizona can cause function reliability. I use a small brush and apply Seal1 to the lube areas. Getting a weapon out after sitting 6 months, I rack the slide/bolt couple of times and the weapon is ready to go. This stuff doesn't dry out like normal oils.
Meh. Just an average CLP.(18.08.2015)
I've used SEAL1 for 12-months. It really only shines as a lubricant in a hot, humid environment. The more you shoot it, the more it heats up, the more it lubricates and protects. I agree it's easier to use than other "bio-based" CLP products like FrogLube. HOWEVER, it DOES NOT clean or eliminate copper fouling. I also had problems using it with a 1911 in a Midwest climate. It will gunk-up the action in the extreme cold and changes from smelling like bubble-mint bubble gum to smelling like a dirty frying pan. I suppose its good enough for the average plinker. And I appreciate its made here in the USA by a retired Navy SEAL but I think this product needs a bit more tweaking if its to survive in the overcrowded CLP market.