Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

W. FREAR INNOVATIONS
COLLIMATOR ELEVATOR

100002512
Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

0 0 1 EUR
Artikel-Nr.: 100002512
W. FREAR INNOVATIONS COLLIMATOR ELEVATOR
Herstellerproduktnummer: COLLELEV Präzisionsgefertigtes Gerät erweitert den Einsatz und die Reichweite Ihres optischen Kollimators für Gewehre, die mit großen Zielfernrohren oder in Ringen hoch über der Mittellinie der Bohrung montierten Zielfernrohren ausgestattet sind, erheblich. Sehr einfach zu bedienen: Montieren Sie Ihren Kollimator am Hebearm, setzen Sie Ihren Bohrspieß in den Aufzugsblock ein und verriegeln Sie ihn mit der Rändelschraube. Setzen Sie Ihren Spud in die Bohrung ein und bewegen Sie den Elevationsschacht nach oben oder unten. Stellen Sie den Kollimator so ein, dass sich seine Rasteransicht nahe der Mitte der Objektivlinse befindet, und arretieren Sie die Höhe des Kollimators mit der zweiten Flügelschraube.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.

Eigenschaften

Versandgewicht: 0,113kg Versandhöhe: 5mm Versandbreite: 58mm Versandlänge: 152mm




Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Newsletter