Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
CZ 75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115914 296000677
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
0 0 1 EUR
Artikel-Nr.: 296000677
EGW CZ75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Herstellerproduktnummer: 49402 841370115914 Entfernen Sie einfach das Visier an Ihrer Waffe und ersetzen Sie es durch die EGW-Halterung, um Ihr Leupold DeltaPoint Pro, JPoint, Redfield Accelerator oder Optima Rotpunktvisier zu montieren. Sie können die Halterung jederzeit abnehmen und Ihre Kimme austauschen. Befestigungsmaterial im Lieferumfang enthalten. Montageanleitung Diopter entfernen* Montieren Sie die EGW-Visierhalterung im Schwalbenschwanz Ziehen Sie die Stellschraube fest (sofern zutreffend) Setzen Sie das Leuchtpunktvisier auf die EGW-Visierhalterung (ein kleines Stück Papier zwischen dem Leuchtpunktvisier und der Visierhalterung leichteres Entfernen und hält Loctite vom Rotpunktvisier fern.) Tragen Sie blaues Loctite auf die mitgelieferten Befestigungsschrauben auf. Ziehen Sie die Befestigungsschrauben mit einem Drehmoment von 15 in/lbs an. Modifikationen an Ihrer Waffe können zum Erlöschen der Herstellergarantie führen. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die aus einer unsachgemäßen Installation oder Verwendung dieses Produkts resultieren, wird keine ausdrückliche oder stillschweigende Haftung übernommen. Diese Halterung passt: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (kann aufgrund abweichender Schwalbenschwanzmaße eine Montage erfordern) CZ P-09 (kann aufgrund unterschiedlicher Schwalbenschwanzmaße angepasst werden) CZ PCR (unter der Vorderseite der Adapterplatte entsteht eine Lücke) Tristar P120
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Color: Black Marke: CZ Material: Aluminum Modell: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D Number of Bases: 1-Piece Style: Tactical

Eigenschaften

Color: Black Marke: CZ Material: Aluminum Modell: P-09,P-07,SP-01 Phantom,SP-01 Shadow,97D,P-01,85,PCR,SP-01,75,97B Number of Bases: 1-Piece Style: Tactical Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm




Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
Newsletter