Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
CZ 75, 85, P-01, PCR VORTEX RAZOR SIGHT MOUNT

841370115891 296000705
Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 EUR
Artikel-Nr.: 296000705
EGW CZ75, 85, P-01, PCR VORTEX RAZOR SIGHT MOUNT
Herstellerproduktnummer: 49453 841370115891 Montageanleitung Diopter entfernen* Montieren Sie die EGW-Visierhalterung im Schwalbenschwanz Ziehen Sie die Stellschraube fest (sofern zutreffend) Setzen Sie das Leuchtpunktvisier auf die EGW-Visierhalterung (ein kleines Stück Papier zwischen dem Leuchtpunktvisier und der Visierhalterung zum leichteren Entfernen und hält Loctite vom Rotpunktvisier fern.) Tragen Sie blaues Loctite auf die mitgelieferten Befestigungsschrauben auf. Ziehen Sie die Befestigungsschrauben mit einem Drehmoment von 15 in/lbs an.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Color: Black Marke: CZ, Tri Star Material: Aluminum Modell: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D, P120 Number of Bases: 1-Piece Style: Tactical

Eigenschaften

Color: Black Marke: CZ,Tri Star Material: Aluminum Modell: PCR,75,97B,85,P120,P-01,SP-01,P-09,SP-01 Shadow,97D,SP-01 Phantom,P-07 Number of Bases: 1-Piece Style: Tactical Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm




Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter