The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length. The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5"" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense MFR 13.5", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding Made in the USA! SPECIFICATIONS: Mounting System - M-LOK Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 14.5" Barrel Profile - Lightweight Product Weight - 5.9 Length - 31 1/2” – 34 ¾” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
Entdecke das DDM4 V7 SLW – Die leichte und schnelle Wahl für Schützen!
Das DDM4 V7 SLW ist ein AR15-Stil Gewehr von Daniel Defense, das mit weniger als 6 lbs zu den leichtesten und schnellsten Gewehren in der DDM4-Reihe gehört. Es ist mit einem 14,5 Zoll langen, kalt geschmiedeten Leichtbauprofil-Lauf ausgestattet, der mit einem verlängerten Flash Suppressor versehen ist, der fest montiert ist, um die NFA-Anforderungen für die minimale Lauflänge von 16 Zoll zu erfüllen.
Wichtige Merkmale:
- LOWER RECEIVER: Mil-Spec mit verbessertem, verbreitertem Magazinwell und QD Swivel-Anschlusspunkt. CNC-gefertigt aus 7075-T6 Aluminium.
- UPPER RECEIVER: Mil-Spec mit Indexiermarkierungen und M4-Futterrampen. CNC-gefertigt aus 7075-T6 Aluminium.
- BARREL: Chrom-Moly-Vanadium-Stahl, kalt geschmiedet, 1:7 Drehung, 14,5" Leichtbauprofil, verchromt, Mil-Spec schwer phosphatiert und HP/MPI getestet.
- GAS SYSTEM: Geklemmter, niederer Gasblock, CNC-gefertigt aus 4140 gehärtetem Stahl, Mid-Length, Direct Impingement.
- MUZZLE DEVICE: Geklemmter und geschweißter Daniel Defense Flash Suppressor, verlängert, aus 17-4 PH Edelstahl, mit Salzbad-Nitridierung.
- BOLT CARRIER GROUP: M16-Profil, Mil-Spec MP getestet, verchromt, korrekt gestakete Gas-Key.
- BUFFER: H Buffer.
- SIGHTS: Separat erhältlich.
- HANDGUARD: Daniel Defense MFR 13.5", CNC-gefertigt aus 6061-T6 Aluminium, M-LOK-Befestigung, Typ III Harteloxiert.
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, CNC-gefertigt aus 7075-T6 Aluminium, mit schwerem Edelstahl-Rollstiften, Typ III Harteloxiert.
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminium.
- BUTTSTOCK: Daniel Defense Buttstock, glasgefüllter Polymer mit Soft-Touch-Überzug.
- PISTOL GRIP: Daniel Defense Pistol Grip, glasgefüllter Polymer mit Soft-Touch-Überzug.
Hergestellt in den USA!
Technische Spezifikationen:
- Montagesystem: M-LOK
- Kaliber: 5.56mm NATO
- Mündungsgang: 1 ⁄ 2 × 28 TPI (Gewinde pro Zoll)
- Gas-System: Mid-Length
- Lauflänge: 14.5"
- Laufprofil: Leicht
- Produktgewicht: 5.9 lbs
- Länge: 31 1/2” – 34 ¾”
- Magazin: DD Magazin mit 32 Schuss Kapazität im gleichen Format wie herkömmliche 30 Schuss Magazine
- Transportkoffer: Daniel Defense Full-Latch Impact Kunststoffkoffer
Hilfe und Kontakt
Newsletter
Klassische Ansicht
Mobile Ansicht