Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT

841370116737 296000562
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
77.9 77.9 1 EUR
Artikel-Nr.: 296000562
EGW DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT
Herstellerproduktnummer: 49503 841370116737 Material: 7075 Aluminium Beschichtung: Mattschwarzer Hardcoat Gesamtlänge: 1,811 "Gesamtbreite: 0,99" Befestigungsmaterial: (2) 6-32 Flachkopfschrauben, (1) 6-32 Feststellschraube Roter Punkt Befestigung: Trijicon RMR Bitte beachten Sie Beachten Sie die Unterschiede vor und nach 2017, wenn Sie Ihre Bestellung aufgeben. Hinteres Regal vor 2017 hinter dem Schwalbenschwanz ist .187 "Hinteres Regal nach 2017 hinter dem Schwalbenschwanz ist .120" Entfernen Sie einfach das Visier an Ihrer Waffe und ersetzen Sie es durch unsere Halterung, um Ihren Trijicon RMR zu montieren. Es sind keine Änderungen erforderlich. Sie können unser Reittier jederzeit abnehmen und Ihr Visier austauschen. Montagematerial im Lieferumfang enthalten. Installationsanweisungen Entfernen des Visiers * Installieren Sie die EGW-Visierhalterung im Schwalbenschwanz. Ziehen Sie die Stellschraube an (falls zutreffend). Platzieren Sie das rote Visier auf der EGW-Visierhalterung (platzieren Sie ein kleines Stück Papier zwischen dem roten Visier und der Visierhalterung, die Sie anbringen möchten) Zum leichteren Entfernen und um Loctite vom Leuchtpunktvisier fernzuhalten.) Blaues Loctite auf die mitgelieferten Befestigungsschrauben auftragen. Befestigungsschrauben mit 15 Zoll / Pfund anziehen. 2 Flachkopfschrauben - vorgesehen für Trjicon RMR Die im Lieferumfang dieser Halterung enthaltenen Flachkopfschrauben Für die Installation benötigen Sie einen 5/64 Zoll Inbusschlüssel.
77.9 EUR 0 77,90 € *
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht auf Lager. Kein Liefertermin bekannt.
Eigenschaften: Color: Black Marke: Magnum Research Material: Aluminum Modell: Desert Eagle Number of Bases: 1-Piece Style: Tactical

Eigenschaften

Color: Black Marke: Magnum Research Material: Aluminum Modell: Desert Eagle Number of Bases: 1-Piece Style: Tactical Versandgewicht: 0,041kg Versandhöhe: 25mm Versandbreite: 89mm Versandlänge: 140mm




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter