Non-Marring Brass Punches Purpose Designed For Sight Work
These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front Sight Punch has a base width of approximately .280"; Rear Sight Punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy Kit. The Small Dovetail Sight Punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns.
Mehr...
Nicht beschädigende Messingstanzen für Sichtarbeiten
Diese Stempel sind speziell für den Ein- und Ausbau sowie die Einstellung von Pistolenvisieren vorne und hinten konzipiert. Hergestellt aus Messing, damit sie weder das Visier noch die Waffe beschädigen, wenn Sie ausrutschen. Einzigartige dreieckige Schlagflächen und robuste Karosserien machen sie zu einem unverzichtbaren Arbeitsgerät für den Büchsenmacher. Kann nach mehrfachem Gebrauch nachgeschliffen werden, um die Wohnung auszurichten. Der Locher für das vordere Visier hat eine Basisbreite von ca. 0,280 Zoll; der Locher für das hintere Visier hat eine Basisbreite von ca. 0,480 Zoll. Sie werden separat verkauft oder können zusammen in einem praktischen Set gekauft werden. Der Small Dovetail Sight Punch (separat erhältlich) hat eine Basisbreite von 0,230 Zoll und ist somit ideal für Visiere und Visiere an kompakten Handfeuerwaffen.
Mehr...
Kundenbewertungen zu BROWNELLS DOVETAIL FRONT SIGHT PUNCH
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,5
Why didn't I think of that?!(26.01.2016)
This is one of things that you look at and say "why didn't I think of that?!" I have been using round brass punches that I have ground lengthwise flats on, but these eliminate all of that fittin', fumin' and fussin' Great product!
Good tool(11.12.2017)
bought this to replace the front sight on my M&P Shield. had to file down the small punch by about .030 in order for the dovetail to fit in the sight slot. worked great after the punch was filed down.
About Half(09.04.2018)
I have no idea what I will use the large one for. I have a sight pusher, but for easy stuff I thought these could save some time. The first gun I needed the small one for was a Springfield XDm40. The front sight on this gun was too narrow for my sight pusher. Well, it was too small for even the small punch. And the punch was too fragile. I sanded off enough material so that it would enter the dovetail, and it quickly broke. I've done two other handguns since the Springfield, (diff. brands) and none had large enough dovetails to use the large punch.
TO BIG(07.01.2017)
Just got my dovetail sight punches, They are to big for the dovetails on my M&P Shield. I'll have to file them down so they will fit. It seems like they would make them so that they would fit?
Artikel-Nr.: 080001138 BROWNELLS DOVETAIL FRONT SIGHT PUNCH Herstellerproduktnummer: DTFSP Diese Stempel sind speziell für den Ein- und Ausbau sowie die Einstellung von Pistolenvisieren vorne und hinten konzipiert. Hergestellt aus Messing, damit sie weder das Visier noch die Waffe beschädigen, wenn Sie ausrutschen. Einzigartige dreieckige Schlagflächen und robuste Karosserien machen sie zu einem unverzichtbaren Arbeitsgerät für den Büchsenmacher. Kann nach mehrfachem Gebrauch nachgeschliffen werden, um die Wohnung auszurichten. Der Locher für das vordere Visier hat eine Basisbreite von ca. 0,280 Zoll; der Locher für das hintere Visier hat eine Basisbreite von ca. 0,480 Zoll. Sie werden separat verkauft oder können zusammen in einem praktischen Set gekauft werden. Der Small Dovetail Sight Punch (separat erhältlich) hat eine Basisbreite von 0,230 Zoll und ist somit ideal für Visiere und Visiere an kompakten Handfeuerwaffen.
21.9EUR11421,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Artikel-Nr.: 080001139 BROWNELLS DOVETAIL REAR SIGHT PUNCH Herstellerproduktnummer: DTRSP Diese Stempel sind speziell für den Ein- und Ausbau sowie die Einstellung von Pistolenvisieren vorne und hinten konzipiert. Hergestellt aus Messing, damit sie weder das Visier noch die Waffe beschädigen, wenn Sie ausrutschen. Einzigartige dreieckige Schlagflächen und robuste Karosserien machen sie zu einem unverzichtbaren Arbeitsgerät für den Büchsenmacher. Kann nach mehrfachem Gebrauch nachgeschliffen werden, um die Wohnung auszurichten. Der Locher für das vordere Visier hat eine Basisbreite von ca. 0,280 Zoll; der Locher für das hintere Visier hat eine Basisbreite von ca. 0,480 Zoll. Sie werden separat verkauft oder können zusammen in einem praktischen Set gekauft werden. Der Small Dovetail Sight Punch (separat erhältlich) hat eine Basisbreite von 0,230 Zoll und ist somit ideal für Visiere und Visiere an kompakten Handfeuerwaffen.
24.9EUR8324,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Artikel-Nr.: 080001164 BROWNELLS DOVETAIL PUNCH KIT Diese Stempel sind speziell für den Ein- und Ausbau sowie die Einstellung von Pistolenvisieren vorne und hinten konzipiert. Hergestellt aus Messing, damit sie weder das Visier noch die Waffe beschädigen, wenn Sie ausrutschen. Einzigartige dreieckige Schlagflächen und robuste Karosserien machen sie zu einem unverzichtbaren Arbeitsgerät für den Büchsenmacher. Kann nach mehrfachem Gebrauch nachgeschliffen werden, um die Wohnung auszurichten. Der Locher für das vordere Visier hat eine Basisbreite von ca. 0,280 Zoll; der Locher für das hintere Visier hat eine Basisbreite von ca. 0,480 Zoll. Sie werden separat verkauft oder können zusammen in einem praktischen Set gekauft werden. Der Small Dovetail Sight Punch (separat erhältlich) hat eine Basisbreite von 0,230 Zoll und ist somit ideal für Visiere und Visiere an kompakten Handfeuerwaffen.
41.9EUR8341,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Non-Marring Brass Punches Purpose Designed For Sight Work
These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front Sight Punch has a base width of approximately .280"; Rear Sight Punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy Kit. The Small Dovetail Sight Punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns.
Mehr...
Nicht beschädigende Messingstanzen für Sichtarbeiten
Diese Stempel sind speziell für den Ein- und Ausbau sowie die Einstellung von Pistolenvisieren vorne und hinten konzipiert. Hergestellt aus Messing, damit sie weder das Visier noch die Waffe beschädigen, wenn Sie ausrutschen. Einzigartige dreieckige Schlagflächen und robuste Karosserien machen sie zu einem unverzichtbaren Arbeitsgerät für den Büchsenmacher. Kann nach mehrfachem Gebrauch nachgeschliffen werden, um die Wohnung auszurichten. Der Locher für das vordere Visier hat eine Basisbreite von ca. 0,280 Zoll; der Locher für das hintere Visier hat eine Basisbreite von ca. 0,480 Zoll. Sie werden separat verkauft oder können zusammen in einem praktischen Set gekauft werden. Der Small Dovetail Sight Punch (separat erhältlich) hat eine Basisbreite von 0,230 Zoll und ist somit ideal für Visiere und Visiere an kompakten Handfeuerwaffen.
Mehr...
Kundenbewertungen zu BROWNELLS DOVETAIL FRONT SIGHT PUNCH
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,5
Why didn't I think of that?!(26.01.2016)
This is one of things that you look at and say "why didn't I think of that?!" I have been using round brass punches that I have ground lengthwise flats on, but these eliminate all of that fittin', fumin' and fussin' Great product!
Good tool(11.12.2017)
bought this to replace the front sight on my M&P Shield. had to file down the small punch by about .030 in order for the dovetail to fit in the sight slot. worked great after the punch was filed down.
About Half(09.04.2018)
I have no idea what I will use the large one for. I have a sight pusher, but for easy stuff I thought these could save some time. The first gun I needed the small one for was a Springfield XDm40. The front sight on this gun was too narrow for my sight pusher. Well, it was too small for even the small punch. And the punch was too fragile. I sanded off enough material so that it would enter the dovetail, and it quickly broke. I've done two other handguns since the Springfield, (diff. brands) and none had large enough dovetails to use the large punch.
TO BIG(07.01.2017)
Just got my dovetail sight punches, They are to big for the dovetails on my M&P Shield. I'll have to file them down so they will fit. It seems like they would make them so that they would fit?