EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Desert Eagle Post 2017 Baby Desert Eagle Post 2006 Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120"
Entdecke die perfekte Montage für dein Desert Eagle Pre 2017!
Die EGW Sight Mount für das Leupold DeltaPoint Pro ist die ideale Lösung, um deine Zielvorrichtung optimal zu montieren. Diese Montage passt perfekt auf die Desert Eagle Pre 2017 Modelle und bietet eine einfache Installation.
Produktbeschreibung
Die EGW Rotpunktvisiere sind so konzipiert, dass sie von links nach rechts installiert werden (mit dem Mündungsende nach vorne). Der Dovetail hat eine progressive Verjüngung, die eine einfachere Installation ermöglicht.
- Entferne die hintere Visierung deines Gewehrs.
- Installiere die EGW Sight Mount im Dovetail.
- Ziehe die Set-Schraube an (falls zutreffend).
- Platziere das Rotpunktvisier auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und hält Loctite vom Rotpunktvisier fern).
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf.
- Ziehe die Montageschrauben auf 15 in/lbs.
Bitte beachte, dass eine Modifikation deiner Feuerwaffe die Herstellergarantie ungültig machen kann. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Es wird keine Haftung für Schäden oder Verletzungen übernommen, die aus einer unsachgemäßen Installation oder Nutzung dieses Produkts resultieren können.
Wichtige Hinweise
Diese Montage passt nicht auf:
- Desert Eagle Post 2017
- Baby Desert Eagle Post 2006
Achte bitte auf die Unterschiede zwischen Pre 2017 und Post 2017 beim Bestellen:
- Pre 2017 hinterer Absatz hinter dem Dovetail ist .187"
- Post 2017 hinterer Absatz hinter dem Dovetail ist .120"