Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
IGNITION KIT WITH STAINLESS STEEL LIGHTENED HAMMER

841370117987 296000783
This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Kit includes: EGW HD Hard Sear EGW HD Stainless Steel Lightened Hammer EGW Ball Head Disconnector EGW Evolved Sear Spring 19# ISMI Main Spring This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Please note: EGW hammers should not be coated by applications that require the product to be heated. These coatings heat the hammer and can cause the hammer to become brittle. Some coatings such as Robar's NP3 will work fine, but please consult the coater before to make sure the process is safe for heat treated components. Coating The Hammer can Lead To Fractures And Will Void The Warranty.
212.9 212.9 1 EUR
Artikel-Nr.: 296000783
EGW IGNITION KIT WITH STAINLESS STEEL LIGHTENED HAMMER
Herstellerproduktnummer: 10211SS 841370117987 Dieses Kit ist nicht 100% Drop-In und sollte vor dem Schießen von einem kompetenten Büchsenmacher installiert oder überprüft werden. Das Kit enthält: EGW HD Hard Sear EGW HD Lightened Steel Hammer EGW Kugelkopf-Trennschalter EGW Evolved Sear Spring 19# ISMI Hauptfeder Dieses Kit ist nicht 100% Drop-In und sollte vor dem Schießen von einem kompetenten Büchsenmacher installiert oder überprüft werden. Bitte beachten: EGW-Hämmer sollten nicht bei Anwendungen beschichtet werden, die eine Erwärmung des Produkts erfordern. Diese Beschichtungen erhitzen den Hammer und können dazu führen, dass der Hammer spröde wird. Einige Beschichtungen wie NP3 von Robar funktionieren gut, aber wenden Sie sich bitte vorher an den Beschichter, um sicherzustellen, dass der Prozess für wärmebehandelte Komponenten sicher ist. Das Beschichten des Hammers kann zu Brüchen führen und macht die Garantie ungültig.
212.9 EUR 0 212,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Oberfläche: Stainless Steel

Eigenschaften

Oberfläche: Stainless Steel Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 114mm Versandlänge: 140mm

Artikeldetails

US-Exportklassifizierung: 0A501.c



This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Kit includes: EGW HD Hard Sear EGW HD Stainless Steel Lightened Hammer EGW Ball Head Disconnector EGW Evolved Sear Spring 19# ISMI Main Spring This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Please note: EGW hammers should not be coated by applications that require the product to be heated. These coatings heat the hammer and can cause the hammer to become brittle. Some coatings such as Robar's NP3 will work fine, but please consult the coater before to make sure the process is safe for heat treated components. Coating The Hammer can Lead To Fractures And Will Void The Warranty.
Newsletter