Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
S&W M&P 22 COMPACT VORTEX VIPER/VENOM SIGHT MOUNT

841370115877 296000673
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
77.9 77.9 1 EUR
Artikel-Nr.: 296000673
EGW SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS S&W M&P 22 COMP BLK
Herstellerproduktnummer: 49327 841370115877 EGW Rotpunktvisiere sind von links nach rechts (mit der Mündung nach vorne) zu montieren. Der Schwalbenschwanz hat eine progressive Verjüngung, um eine einfachere Installation zu ermöglichen. Entfernen Sie einfach das Visier an Ihrer Waffe und ersetzen Sie es durch die EGW-Halterung, um Ihr Vortex Viper/Venom, Burris FastFire oder Docter Rotpunktvisier zu montieren. Sie können die Halterung jederzeit abnehmen und Ihre Kimme austauschen. Befestigungsmaterial im Lieferumfang enthalten. Montageanleitung Diopter entfernen* Montieren Sie die EGW-Visierhalterung im Schwalbenschwanz Ziehen Sie die Stellschraube fest (sofern zutreffend) Setzen Sie das Leuchtpunktvisier auf die EGW-Visierhalterung (ein kleines Stück Papier zwischen dem Leuchtpunktvisier und der Visierhalterung zum leichteren Entfernen und hält Loctite vom Rotpunktvisier fern.) Tragen Sie blaues Loctite auf die mitgelieferten Befestigungsschrauben auf. Ziehen Sie die Befestigungsschrauben auf 15 Zoll/lbs fest für Burris FastFire und Docter Sights Die Schrauben, die dieser Halterung beiliegen, benötigen zur Montage einen 5/64'' Inbusschlüssel. Änderungen an Ihrer Waffe können zum Erlöschen der Herstellergarantie führen. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die aus einer unsachgemäßen Installation oder Verwendung dieses Produkts resultieren, wird keine ausdrückliche oder stillschweigende Haftung übernommen.
77.9 EUR 2 77,90 € *
Lieferzeit ca. 14-21 Werktage.
2 Stk. im Lager USA
Eigenschaften: Color: Black Material: Aluminum Number of Bases: 1-Piece Style: Tactical

Eigenschaften

Color: Black Material: Aluminum Number of Bases: 1-Piece Style: Tactical Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm




EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Newsletter