Makes your restorations as accurate and valuable as possible. These red-brown rubber pads are exact reproductions of those used in the early 1900’s. The Hawkins was a commonly-used, turn of the century, aftermarket pad. This faithful re-creation has the original Hawkins logo in the center and is available with the original, diamond heart pattern vents or horizontal square vents. The Winchester Vented is a copy of the original pad on early 1920’s Winchesters the includes the Winchester logo and the legend “MADE IN U.S.A.” above the logo and “TRADE MARK PAT. JUNE 6, 1922” correctly placed below it. Winchester Solid is a solid red pad modeled after that of many original pre-’64 Winchesters including the Model 70, Model 12, Model 21, plus all lever action and pump models. Raised lettering Winchester logo. Early Noshoc pad provides an opportunity to put the correct era pad on many high-grade American guns. Used by Parker, Fox, L.C. Smith, Remington, Winchester, and Lefever. Raised lettering reads “NOSHOC” with the legend “PATENTED JUNE 6, 1922” above the logo and “MADE IN U.S.A” below it. The Universal pad is available in red and works well on a variety of custom stocks. Screw holes are 3¼" apart; midway between these holes is an internal cavity ¾" wide and 21⁄8" long.
SPECS: Rubber. Red pad with black base. Hawkins 1"- 5.93x1.3, 1 deep, 3.25 spacing. Winchester Vented - 4.75x1.6875, 1 deep, 3.0625 hole spacing. Winchester Solid - 5.5x1.875, .875 deep, 3.125 spacing. 1/2" Red Pad- 5.5x1.875, .5 deep, 3.25 spacing. 1/2" Brown Pad- 5.5x1.875, .5 deep, 3.25 spacing. 3/4" Red Pad- 5.5x1.875, .75 deep, 3.25 spacing. Hawkins Logo- 6x1.96875, 1.0625 deep, 3.25 spacing
Die perfekte Detailarbeit für eine präzise Restauration
Mit den FACTORY LOGO RECOIL PADS und NOSHOC RECOIL PAD von GALAZAN machst du deine Restaurationen so genau und wertvoll wie möglich. Diese rot-braunen Gummipads sind exakte Nachbildungen der Pads, die in den frühen 1900er Jahren verwendet wurden.
Produkteigenschaften:
- Hawkins Pad: Ein weit verbreitetes Nachrüstpad aus der Jahrhundertwende. Diese treue Nachbildung hat das originale Hawkins-Logo in der Mitte und ist mit dem originalen, diamantförmigen Muster oder horizontalen quadratischen Belüftungen erhältlich. Maße: 1" - 5.93x1.3, 1 tief, 3.25 Abstand.
- Winchester Vented: Eine Kopie des originalen Pads von frühen 1920er Jahre Winchesters, das das Winchester-Logo sowie die Aufschrift „MADE IN U.S.A.“ über dem Logo und „TRADE MARK PAT. JUNE 6, 1922“ korrekt darunter hat. Maße: 4.75x1.6875, 1 tief, 3.0625 Lochabstand.
- Winchester Solid: Ein solides rotes Pad, das nach vielen originalen Pre-’64 Winchesters, einschließlich Modell 70, Modell 12, Modell 21 sowie allen Lever-Action- und Pump-Modellen, modelliert wurde. Erhöhte Schriftzüge mit Winchester-Logo. Maße: 5.5x1.875, .875 tief, 3.125 Abstand.
- 1/2" Red Pad: Maße: 5.5x1.875, .5 tief, 3.25 Abstand.
- 1/2" Brown Pad: Maße: 5.5x1.875, .5 tief, 3.25 Abstand.
- 3/4" Red Pad: Maße: 5.5x1.875, .75 tief, 3.25 Abstand.
- Hawkins Logo: Maße: 6x1.96875, 1.0625 tief, 3.25 Abstand.
Das frühe Noshoc-Pad bietet die Möglichkeit, das richtige Pad aus der entsprechenden Ära an vielen hochwertigen amerikanischen Waffen anzubringen. Verwendet von Parker, Fox, L.C. Smith, Remington, Winchester und Lefever. Die erhöhte Schrift liest „NOSHOC“ mit der Legende „PATENTED JUNE 6, 1922“ über dem Logo und „MADE IN U.S.A“ darunter.
Das Universal-Pad ist in rot erhältlich und eignet sich gut für eine Vielzahl von individuellen Schäften. Die Schraublöcher sind 3¼" auseinander; mittig zwischen diesen Löchern befindet sich ein internes Gehäuse von ¾" Breite und 21⁄8" Länge.