Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
H&K VP9, P30, HK45, VP40 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114221 296000683
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount is not intended for use with the optics ready version of these pistols. This mount does not fit: HK USP
0 0 1 EUR
Artikel-Nr.: 296000683
EGW H&K VP9, P30, HK45, VP40 LEUPOLD DELTAPOINT PRO SIGHT MNT
Herstellerproduktnummer: 49408 841370114221 EGW Rotpunktvisiere sind von links nach rechts (mit der Mündung nach vorne) zu montieren. Der Schwalbenschwanz hat eine progressive Verjüngung, um eine einfachere Installation zu ermöglichen. Entfernen Sie einfach das Visier an Ihrer Waffe und ersetzen Sie es durch die EGW-Halterung, um Ihr Leupold DeltaPoint Pro, JPoint, Redfield Accelerator oder Optima Rotpunktvisier zu montieren. Sie können die Halterung jederzeit abnehmen und Ihre Kimme austauschen. Befestigungsmaterial im Lieferumfang enthalten. Montageanleitung Diopter entfernen* Montieren Sie die EGW-Visierhalterung im Schwalbenschwanz Ziehen Sie die Stellschraube fest (sofern zutreffend) Setzen Sie das Leuchtpunktvisier auf die EGW-Visierhalterung (ein kleines Stück Papier zwischen dem Leuchtpunktvisier und der Visierhalterung zum leichteren Entfernen und hält Loctite vom Rotpunktvisier fern.) Tragen Sie blaues Loctite auf die mitgelieferten Befestigungsschrauben auf. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die aus einer unsachgemäßen Installation oder Verwendung dieses Produkts resultieren, wird keine ausdrückliche oder stillschweigende Haftung übernommen. Diese Halterung ist nicht für die Verwendung mit der optikbereiten Version dieser Pistolen vorgesehen. Diese Halterung passt nicht: HK USP
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Color: Black Marke: Heckler & Koch Material: Aluminum Modell: P30, 45, 45C, VP9, P30L, VP40, VP9SK, P30sk Number of Bases: 1-Piece Style: Tactical

Eigenschaften

Color: Black Marke: Heckler & Koch Material: Aluminum Modell: P30L,45,P30,45C,VP9SK,VP9,VP40,P30sk Number of Bases: 1-Piece Style: Tactical Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm




EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount is not intended for use with the optics ready version of these pistols. This mount does not fit: HK USP
Newsletter