Ihr Warenkorb ist leer.

Warenkorb

+43 2235 21555

Newsletter abonnieren

BROWNELLS
MAUSER 91 DOVETAIL FRONT SIGHT BLANK

050806101524 078050000

Ready To Fit & Shape For Custom Applications

.375" high blade lets you zero the Model 96 Swede and others to point of aim. Square post blade gives an easy-to-see, well defined sight picture with issue rear sights. Plenty of extra material so you can file and shape the blade to original contour or a custom shape. 5.26mm dovetail fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles with military sight base.

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Mehr...

Ready to Fit & Shape für kundenspezifische Anwendungen

Mit der .375 "-Hochklinge können Sie das Modell 96 Swede und andere auf Null stellen, um den Zielpunkt zu bestimmen. Mit der quadratischen Klinge erhalten Sie ein gut sichtbares, gut definiertes Sichtbild mit Sicht nach hinten Klinge mit originaler Kontur oder individueller Form. 5,26 mm Schwalbenschwanz für die Mauser-Visiersockel. Für die meisten Mauser-91- bis 98-Gewehre mit Militär-Visiersockel.

TECHNISCHE DATEN: Stahl, gebläutet, matt. .077 "(1,9 mm) breit, .375" (9,5 mm) hoch über 81 ° x .207 "x .081" Schwalbenschwanz. Erfordert möglicherweise eine geringfügige Anpassung.

Mehr...

Kundenbewertungen zu BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,4

CMP legal (26.04.2010)

This front sight is now legal for CMP's Vintage rifle matches. Most Mauser front sights are too short for regulation at 100 or 200 yds and their pyramid shape is harder to see than a square partridge style blade. This blade is easy to install and file the height to regulate to 100 yds. A little cold blueing after filing and you're in business. I have used them on my Swede M-96 and German K-98.

I really liked this product (20.01.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (02.09.2011)

Hello,Tall Mauser sights have been hard to find. My Gewehr 88 Commission Rifle (bought for [$] for the folks who hate me mentioning this!) takes Mauser sights and had been shooting a foot high at 50 yards, and I'm not sure how high at 100!I bought this sight blank, fitted it, brought it down to my preferred elevation, sharpened the top with a "V" shaped carbide knife sharpener, blued it, and proceeded to enjoy!I highly recommend this to anyone who hates holding under. It is a quality product.I'm so impressed I'm posting a review on all the boards I belong to, recommending this product. Thank you,Josh

Front Sight blade (19.03.2012)

These sight blades save me heaps of time when setting up a good service rifle, I used to have to weld up all my Swedish mauser sights to get them to shoot to the point of aim but with these inserts I just file them to height plus since they are square they provide a better sight picture.

Exactly what I needed! Another home run! (17.07.2013)

I have a 1928 Carl Gustafs Swedish Mauser. I was able to locate an original competition rear peep sight for it...only trouble was that the original front sights was way too low.

After trying to find original sights, I stumbled upon this one. It DOES require fitting, so get out your small precision files, and sandpaper, and spend some time doing it right.

After about 30min filing, I had it fit. As for the height? 100% correct. The rifle now shoots point of aim and in line with the yardage numbers on the peep.

Nice quality, and nice flat finish. I recommend this product.

Very Happy! (03.02.2014)

Just put this on my Yugo M24/47. The original front sight was installed from the RIGHT looking at the target so tap it out from the LEFT side. The bottom of the new sight base had to be filed down by about 0.01 inch to fit. Also filed down the base corners every so slightly to alow easier installation. Put Frog Lube on it to prevent rusting and help slide it in place. Put some red fluorescent paint on it and checked windage while looking through barrel at yonder pine tree top. Off to the range with it now!

prepare to file (20.06.2015)

The paperwork says minor fitting may be necessary. Thats an understatement. Will not even come close to fitting K98, M48, M24/47 Mausers. I have all three and this sight is nowhere close to fitting without major modifications. The dove tail angle is incorrect, its too thick, too long and too wide. It doesnt even fit the specs that Brownells publishes. 4.5 hours with a file and i am still trying to get the thing to fit. i see all these good reviews, i guess i am the lucky one that got the lemon.

Dissapointed (11.02.2017)

I found this item to be somewhat irritating simply because the dovetail angle is incorrect, on my 1915 M-96 Swedish Mauser. The angle is not as steep as the factory dovetail cutout, and this causes you to have to reshape the angle. I don't mind flling/sanding; but the angle should match the Factory cutout...it does not.

Front sight replace in my Mitchell mause (16.04.2017)

My Mauser was shooting high. I bought brownels front sight and used a set of needle files. The sides of the dovetail were steeper than that of the front sight so I filed to fit. Be careful how much you take off the sight it needs to fit tight. I used my micrometer. I was able t fit it well and shot at the range. Of course it shot very low so I filed the top of blade and made fast adjustments. I got it shooting dead on and it is better than the factory sight. I wish there was a rear replacement as the Mauser rear is a bit junky. This replacement blade is all you need and will work fine on any Mauser that I can imagine. some fitting will be required becausethere is too much variation from Mauser to Mauser. By it you will be happy have a smith place it if you can't. This is a very good product I'm glad I bought it.

A FEW MINUTES OF FILING (25.08.2017)

Took about 20 minutes with a couple files and was good to go. Fit my Yugoslavian m24/47 but had to take .020" off the bottom with a flat course file and I used my triangle shaped file on the dove tails to get those to fit my base. It's about .200" taller than the one that was on it so hopefully I'll get the impact where it should be. Not a foot high at 100 yards. Just remember it's made big so you or your gunsmith can fit it to your rifle.

Lesen Sie 10 weitere Bewertungen bei brownells.com

20.9 20.9 1 EUR

Artikel-Nr.: 078050000
BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK 050806101524 Mit der .375 "-Hochklinge können Sie das Modell 96 Swede und andere auf Null stellen, um den Zielpunkt zu bestimmen. Mit der quadratischen Klinge erhalten Sie ein gut sichtbares, gut definiertes Sichtbild mit Sicht nach hinten Klinge mit originaler Kontur oder individueller Form. 5,26 mm Schwalbenschwanz für die Mauser-Visiersockel. Für die meisten Mauser-91- bis 98-Gewehre mit Militär-Visiersockel.

20.9 EUR 28 20,90 € *

Lieferzeit ca. 14-21 Werktage.
Mehr als 10 Stk. im Lager USA

Eigenschaften: Color: Black Height: .375 Marke: Mauser Material: Steel Modell: 94, 91, 93, 98, 96, 95 Style: Dovetail

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Color: Black Height: .375 Marke: Mauser Material: Steel Modell: 91,93,94,95,96,98 Style: Dovetail Versandgewicht: 0,009kg Versandhöhe: 13mm Versandbreite: 86mm Versandlänge: 259mm

Ready To Fit & Shape For Custom Applications

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Mehr...

Ready to Fit & Shape für kundenspezifische Anwendungen

TECHNISCHE DATEN: Stahl, gebläutet, matt. .077 "(1,9 mm) breit, .375" (9,5 mm) hoch über 81 ° x .207 "x .081" Schwalbenschwanz. Erfordert möglicherweise eine geringfügige Anpassung.

Mehr...

Kundenbewertungen zu BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,4

CMP legal (26.04.2010)

I really liked this product (20.01.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (02.09.2011)

Front Sight blade (19.03.2012)

Exactly what I needed! Another home run! (17.07.2013)

Very Happy! (03.02.2014)

prepare to file (20.06.2015)

Dissapointed (11.02.2017)

Front sight replace in my Mitchell mause (16.04.2017)

A FEW MINUTES OF FILING (25.08.2017)

Lesen Sie 10 weitere Bewertungen bei brownells.com

Kunden kauften auch

1911 BARREL LINK KIT - EGW BARREL LINK KIT

EGW BARREL LINK KIT
1911 BARREL LINK KIT

EGW

Auf Lager

43,90 € * 14,40 € - 43,90 €*

Gelenkstücke

3,7

KCI USA 17RD MAGAZINE 9MM BLACK POLYMER FOR GLOCK 17, 19, 26
17 ROUND MAGAZINE 9MM FOR GLOCK® 17, 19, 26

KCI USA

Auf Lager

22,90 € *

Magazine

4,3

MAGPUL M-LOK RAIL 3 SLOT PICATINNY ALUMINUM BLACK 1.5"
AR-15 PICATINNY M-LOK RAIL ALUMINUM

MAGPUL

Auf Lager

27,90 € * 27,90 € - 34,90 €*

Accessory Rails

REDDING DECAP ROD ASSEMBLY - 22 REMINGTON JET
DECAP ROD ASSEMBLIES

REDDING

Nicht verfügbar

34,90 € * 25,90 € - 34,90 €*

Ersatzteile und Aufrüstsets | Bushings für Halskalibrierer

J P ENTERPRISES AR-15 SILENT CAPTURED SPRING GEN 2
AR-15 SILENT CAPTURED SPRINGS GEN 2

J P ENTERPRISES

Auf Lager

202,90 € * 202,90 € - 274,90 €*

Anmeldung

Kennwort vergessen?
Registrieren

Social Media

Site Map

Produkt Gruppen

Bestellen

Kundenservice

Willkommen

Willkommen bei brownells.at, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in Austria!

Unser Versprechen

Wenn Sie gerne schießen und das Arbeiten mit Waffen mögen, ganz gleich, ob als Hobby oder beruflich oder einfach nur ein sportlich ambitionierter Waffenbesitzer sind, bei uns sind Sie richtig! Keine Extrakosten für Zoll, Importgenehmigung und kein Mindestbestellwert!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Enthusiasten, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertigen Waffenteilen und dem Zubehör von Brownells.

Sie finden bei uns mehr als 60.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning Ihrer Waffen.