Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
100004429
Top-Quality Machinist Tool For Precision Work
Spring-loaded mechanical tool locates the exact distance from the center of the mill spindle to the edge of the work piece so you know precisely how deep you’re milling, without guessing. Easy-to-use—just insert in the mill collet, run at 500-1000 rpm, and move slowly to the edge you want to locate. As the lower cylinder of the Edge Finder touches the work piece edge, it “kicks out” suddenly. When you see the kick, the spindle centerline is located exactly .100" from the edge of the work piece.

SPECS: Steel, surface ground and hardened. 27⁄8" (7.3cm) OAL, 3⁄8" (9.5mm) diameter shank, .200" (5.1mm) diameter tip.

0 0 1 EUR
Artikel-Nr.: 100004429
FISHER MACHINE SHOP MICRO EDGE FINDER
Herstellerproduktnummer: A Das gefederte mechanische Werkzeug ermittelt den genauen Abstand zwischen der Mitte der Frässpindel und der Kante des Werkstücks, sodass Sie genau wissen, wie tief Sie fräsen, ohne zu raten. Einfach zu bedienen - setzen Sie es einfach in die Spannzange ein, laufen Sie mit 500-1000 U / min und bewegen Sie sich langsam zu der Kante, die Sie lokalisieren möchten. Wenn der untere Zylinder des Kantensuchers die Werkstückkante berührt, tritt er plötzlich aus. Wenn Sie den Kick sehen, befindet sich die Spindelmittellinie genau 0,100 cm vom Rand des Werkstücks entfernt.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.

Eigenschaften

Versandgewicht: 0,045kg Versandhöhe: 8mm Versandbreite: 33mm Versandlänge: 89mm




Top-Quality Machinist Tool For Precision Work
Spring-loaded mechanical tool locates the exact distance from the center of the mill spindle to the edge of the work piece so you know precisely how deep you’re milling, without guessing. Easy-to-use—just insert in the mill collet, run at 500-1000 rpm, and move slowly to the edge you want to locate. As the lower cylinder of the Edge Finder touches the work piece edge, it “kicks out” suddenly. When you see the kick, the spindle centerline is located exactly .100" from the edge of the work piece.

SPECS: Steel, surface ground and hardened. 27⁄8" (7.3cm) OAL, 3⁄8" (9.5mm) diameter shank, .200" (5.1mm) diameter tip.

Newsletter