This is the cell Modlite recommends for the PLHv2 and OKW light heads. This cell will also work with the Surefire® M600DF and Streamlight HL-X lights for optimum performance. This is the best batteries Modlite offers for high discharge flashlights. The cell inside the battery is made by LG Chem in Korea. Modlite then adds a high quality protection PCB/BMS along with the button/nipple top in an ISO 9001 certified factory to all safety standards. A black wrap is put over the top to hold it together. These are manufactured with a very high quality PCB including a Japanese Ricoh protection IC for 18A high current cutoff (most PCBs will not be able to handle this much current). This protection circuit protects the battery from mishandling, overcharge, or over discharge while allowing the battery to do its job properly. Quick Specs: Max Continuous Discharging Current: 10A Typical Capacity: 3500 mAh Style: Button Top Approximate Dimensions (including button): 69.1mm length x 18.6 mm diameter Maximum Length: 69.6mm Discharge cut-off voltage: 2.5V (approximate) Voltage: 3.6V Full Charge Voltage: 4.2V Charge Current: 1.5A standard Protection Cutoff Current: ~18A
Die beste Batterie für deine Hochleistungs-Taschenlampe!
Die MODLITE 18650 BATTERY ist die ideale Wahl für deine PLHv2 und OKW Lichtköpfe. Diese Zelle funktioniert auch optimal mit den Surefire® M600DF und Streamlight HL-X Lampen, um die beste Leistung zu gewährleisten.
Hier sind einige Details, die du wissen solltest:
- Maximale kontinuierliche Entladestromstärke: 10A
- Typische Kapazität: 3500 mAh
- Stil: Button Top
- Ungefähre Abmessungen (inkl. Button): 69.1mm Länge x 18.6mm Durchmesser
- Maximale Länge: 69.6mm
- Entlade-Abschaltspannung: 2.5V (ungefähr)
- Spannung: 3.6V
- Volle Lade-Spannung: 4.2V
- Lade-Strom: 1.5A standard
- Schutz-Abschaltstrom: ~18A
Der Zellenkern wird von LG Chem in Korea hergestellt. Modlite fügt dann eine hochwertige Schutzplatine (PCB/BMS) hinzu, die alle Sicherheitsstandards in einem ISO 9001 zertifizierten Werk erfüllt. Ein schwarzes Wrap wird über die Oberseite gelegt, um alles zusammenzuhalten.
Die Schutzschaltung schützt die Batterie vor unsachgemäßer Handhabung, Überladung oder Tiefentladung und sorgt gleichzeitig dafür, dass die Batterie ihre Aufgabe ordnungsgemäß erfüllt.