Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

APEX TACTICAL SPECIALTIES INC
M&P RED FLAT FACE FORWARD SET TRIGGER

856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

281.9 281.9 1 EUR
Artikel-Nr.: 100017344
APEX TACTICAL SPECIALTIES INC RED FLAT FACED FORWARD SET SEAR & TRIGGER KIT M&P
Herstellerproduktnummer: 100-055 856008005529 Der neue Abzug mit flachem Vorderwagen vermittelt das Gefühl und die Leistung eines werkseitigen Abzugs vom Typ 1911 bei einem ungefähren Gewicht von 3,0 bis 4,0 lbs. Das Apex Flat Faced Forward Set-Abzugskit wurde für die Verwendung mit allen Smith & Wesson M & P-Pistolenmodellen im Centerfire-Kaliber (außer Shield) entwickelt und reduziert die Vor- und Nachlaufzeiten des Abzugs zeigen Sie tiefer auf die Abzugsfläche, um die Vorteile niedrigerer Abzugsgewichte zu nutzen. Der Flat-Faced-Forward-Set-Auslöser kann mit Ihrem vorhandenen Apex-Forward-Set-Sear-Kit verwendet werden und funktioniert nicht mit den werkseitigen Smith & Wesson-Feuerkontrollteilen. Das komplette Kit enthält den Apex Forward Set Sear, der den Abzugshub verkürzt, indem der Schlagbolzen weiter nach vorne als der Werksabzug fällt. Der Ultimate Striker Block erzeugt einen sanfteren Abzug und beseitigt die meisten Fehlzündungsprobleme durch einen verbesserten Radius auf der Schlagfläche des Schlagblocks. Der Satz vorwärts eingestellter Federn erzeugt einen Abzug von 3,0 bis 4,0 lbs, abhängig davon, welche Abzugsrückholfeder eingebaut ist. Erfordert die Verwendung des Sear-Gehäuseblocks für den großen Sear-Kolben und die Feder (aktuelle Produktion ab Juni 2011), NICHT empfohlen für Duty / Carry-Anwendungen. Passt nicht für M & P 2.0 Pistolen
281.9 EUR 10 281,90 € *
Lieferzeit ca. 14-21 Werktage.
Mehr als 10 Stk. im Lager USA
Eigenschaften: Marke: Smith & Wesson Modell: M&P Oberfläche: Red Style: Competition, Enhanced

Eigenschaften

Marke: Smith & Wesson Modell: M&P Oberfläche: Red Style: Enhanced,Competition Versandgewicht: 0,005kg Versandhöhe: 20mm Versandbreite: 79mm Versandlänge: 89mm

Artikeldetails

US-Exportklassifizierung: 0A501.c



The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

Newsletter