Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Entdecke die perfekte Lösung für dein Trijicon RMR!
Der NOVAK-STYLE TRIJICON RMR SIGHT MOUNT von EGW ist die ideale Halterung für dein Trijicon RMR Rotpunktvisier. Dieser Mount ist aus hochwertigem 7075 Aluminium gefertigt und mit einer mattschwarzen Hartbeschichtung versehen, die nicht nur gut aussieht, sondern auch äußerst langlebig ist.
Produktdetails:
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Montagezubehör: (2) 6-32 Flachkopfschrauben, (1) 6-32 X 3/16 Set-Schraube
- Rotpunkt Kompatibilität: Trijicon RMR, Holosun HS507C
Passend für:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Nicht passend für:
Um dein Trijicon RMR Rotpunktvisier zu montieren, entferne einfach die hintere Visierung deines Gewehrs und ersetze sie durch unseren Mount. Es sind keine Änderungen erforderlich, und du kannst unseren Mount jederzeit wieder abnehmen, um deine hintere Visierung wieder anzubringen.
Montageanleitung:
- Entferne die hintere Visierung*
- Installiere den EGW Sight Mount im Dovetail
- Ziehe die Set-Schraube an (falls zutreffend)
- Platziere das Rotpunktvisier auf dem EGW Sight Mount (ein kleines Stück Papier zwischen dem Rotpunktvisier und dem Mount erleichtert die Entfernung und schützt das Rotpunktvisier vor Loctite).
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf
- Ziehe die Montageschrauben mit 15 in/lbs an
Die mitgelieferten Flachkopfschrauben benötigen einen 5/64'' Innensechskantschlüssel für die Installation.