OTB OVERT Front Plate Bag The LV/119 System The LV/119 SYSTEM is a family of products that work together to give end-users the ability to scale their equipment to their current needs. The fact that this is a cohesive system means that end-users are able to mix and match accessories in most cases. For example: One could take a C O V E R T Front or Rear Plate bag and use it with an O V E R T Front and Rear Plate Bag. Users may cross pollinate cummerbunds, shoulder covers, and other pieces of the system. The SYSTEM encompasses many parts, some of which are currently available and some that are in development. These include Back Panels of various types, MOLLE cummerbunds, First Spear TUBES™ integrations, and different placards. Over The Beach Operations Over The Beach Operations are some of the most challenging and miserable operations that service members must endure. We are proud to bring a suite of products that directly results in improved load carriage and soldier survival during sea borne operations. The OTB product line is built with a mesh material, which allows for quick drainage of water and sea borne debris such a sand. OTB products will dry faster after exiting the water and will drain water faster and more efficiently as well. The mesh also makes the products simple to clean using fresh water after conducting operations in salt environments. The Over The Beach (OTB) O V E R T shares the same profile as the C O V E R T and O V E R T plate bags but with modifications that make it more suitable for seaborne operations. Most noticeable the bags are made primarily of a hydrophobic mesh material. The front bag features a 3 Row / 4 Column MOLLE field that doubles as a 6” x 3” Velcro Field. This may be used to attach End User Devices (EUDs), such as those made by KAGWERKS or Juggernaut Defense. The Velcro may be used to mount placards, patches, and IR identifiers. The MOLLE can also be used to mount administrative pouches, frag grenade pouches, or Personal Floatation Devices. Every front plate bag comes standard with sewn loops on the sides for attaching First Spear TUBES™ for use with our MOLLE TUBES™ Cummerbund. Placard and Chest Rig Integration. All LV/119 Plate Bags offer placard and chest rig integration via removable 1-Inch ITW NEXUS Buckles. These clips are removable, allowing users to reduce the signature of the plate bag if it is being worn under a cover shirt or being utilized in a low-profile role. The OTB series of products offers a specific OTB Placard that can button into the front bag for added security when jumping into the water. The OTB plate bag is still compatible with our normal placard offerings as well as the Micro Fight Chest Rig Chassis. Push To Talk Support. Each O V E R T front plate bag comes standard with a PTT/Porkchop Loop on either side. Communication Cable Routing. The Modern Warfighter and Law Enforcement Officer has a radio. To date, the majority of manufacturers have not taken end-user communications needs in to their design considerations - we endeavor to break that paradigm. The O V E R T front bag offers open shoulders to facilitate commo cable routing inside the plate bags and over the shoulders. It also offers small routing points by the 1-Inch ITW NEXUS buckles on the chest - easily accommodating PTT cable routing. Plate Fitment. The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium -10" x 12.5" Large - 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness - MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set
Entdecke die OTB OVERT Front Plate Bag für deine Einsätze!
Die OTB OVERT Front Plate Bag ist Teil des LV/119 Systems von SPIRITUS SYSTEMS, das dir die Möglichkeit bietet, deine Ausrüstung an deine aktuellen Bedürfnisse anzupassen. Dieses kohärente System ermöglicht es dir, Zubehörteile in den meisten Fällen zu kombinieren und zu mischen.
Über die OTB OVERT Front Plate Bag
Die OTB OVERT Front Plate Bag ist speziell für Über die Strand Operationen konzipiert. Diese Einsätze gehören zu den herausforderndsten und unangenehmsten, die Soldaten durchstehen müssen. Wir sind stolz darauf, eine Produktreihe anzubieten, die zu einer verbesserten Lastentransportierung und Überlebensfähigkeit während seebasierter Operationen führt. Die OTB-Produkte bestehen aus einem Mesh-Material, das eine schnelle Entwässerung von Wasser und seebasiertem Schmutz wie Sand ermöglicht.
Eigenschaften
- Die Fronttasche verfügt über ein 3-Reihen / 4-Spalten MOLLE-Feld, das auch als 6” x 3” Velcro-Feld dient.
- Kompatibel mit End User Devices (EUDs) wie KAGWERKS oder Juggernaut Defense.
- Integrierte PTT/Porkchop Schleifen auf beiden Seiten für Push-To-Talk Unterstützung.
- Offene Schultern für die einfache Kabelverlegung von Kommunikationskabeln.
- Entwickelt für die Verwendung mit US Standard Issue SAPI-Platten.
Plattenanpassung
Die Tasche ist so konzipiert, dass sie die folgenden Plattengrößen aufnehmen kann:
- Medium - 10" x 12.5"
- Large - 10.25" x 13.25"
- Extra Large - 11" x 14.00"
- Dicke - MAXIMUM von 1.20"
Hinweis: Dies ist ein Bestandteil eines Spiritus Systems LV/119 Plate Carrier Builds. Um einen vollständigen Plate Carrier zu erstellen, musst du mindestens eines der folgenden Teile auswählen:
- Spiritus Systems Front Plate Bag
- Spiritus Systems Rear Plate Bag
- Spiritus Systems Shoulder Covers
- Spiritus Systems Cummerbund Set
Entdecke die Möglichkeiten mit der OTB OVERT Front Plate Bag und verbessere deine Ausrüstung für die nächste Mission!