Quickly attaches to factory drilled and tapped 10/22® receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver.
SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75" (12cm) long. Includes screws and Allen wrench.
Mehr...
Vielseitige Halterung für kompakte Zielfernrohre und Visiere
Schnelle Befestigung an werkseitig gebohrten und mit Gewinde versehenen 10/22®-Empfängern. Sechs Kreuzschlitze bieten die Vielseitigkeit, Zielfernrohre in voller Größe sowie Leuchtpunktvisiere oder kompakte Zielfernrohre mit Ringen im Weaver-Stil zu montieren. Silber eloxiert oder hartbeschichtet, schwarzes Finish passend zum Werksempfänger.
TECHNISCHE DATEN: T6061 Aluminium, silberfarben, eloxiert oder hartbeschichtet, schwarz lackiert. 12 cm lang. Inklusive Schrauben und Inbusschlüssel.
Mehr...
Kundenbewertungen zu POWER CUSTOM SILVER 10/22® RECEIVER MOUNT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Beats factory dovetail mount hands down.(11.12.2009)
This is a top notch, made in the U.S.A. no nonsense mount. The finish matches the reciever finish perfectly. If you are tired of your rings slipping forward on the factory dovetail style mount, this is the mount for you. It attaches to the reciever with allen screws. Keep in mind that it is about 3/8" taller than the factory mount, when selecting rings.
No screws, but otherwise an OK mount.(23.05.2015)
This mount is advertised as including the mounting screws. Mine arrived sealed in the package, but there were no screws. I don't fault Brownells because Power Custom's website also says the product includes screws. Appears someone neglected to put the screws in the package. I emailed Power Custom through their website and asked for the screws, but received no response other than a confirmation that they received my submission. Requires a longer 6-48 flat head screw than the typical scope mount screw. The mount appears to be fair quality. Matches the receiver color well. Made in China. I probably would not buy this one again.
Artikel-Nr.: 713122101 POWER CUSTOM SILVER 10/22® RECEIVER MOUNT Herstellerproduktnummer: PCRB Schnelle Befestigung an werkseitig gebohrten und mit Gewinde versehenen 10/22®-Empfängern. Sechs Kreuzschlitze bieten die Vielseitigkeit, Zielfernrohre in voller Größe sowie Leuchtpunktvisiere oder kompakte Zielfernrohre mit Ringen im Weaver-Stil zu montieren. Silber eloxiert oder hartbeschichtet, schwarzes Finish passend zum Werksempfänger.
28.9EUR328,90 €
*
Lieferzeit ca. 14-21 Werktage. 3 Stk. im Lager USA
Eigenschaften:Color: SilverMarke: RugerMaterial: AluminumModell: 10/22Number of Bases: 1-PieceStyle: Weaver-Style Bases
Color:
Silver
Marke:
Ruger
Material:
Aluminum
Modell:
10/22
Number of Bases:
1-Piece
Style:
Weaver-Style Bases
Versandgewicht: 0,091kgVersandhöhe: 20mmVersandbreite: 104mmVersandlänge: 211mm
Artikel-Nr.: 713122100 POWER CUSTOM BLACK 10/22® RECEIVER MOUNT Herstellerproduktnummer: PCRBB Schnelle Befestigung an werkseitig gebohrten und mit Gewinde versehenen 10/22®-Empfängern. Sechs Kreuzschlitze bieten die Vielseitigkeit, Zielfernrohre in voller Größe sowie Leuchtpunktvisiere oder kompakte Zielfernrohre mit Ringen im Weaver-Stil zu montieren. Silber eloxiert oder hartbeschichtet, schwarzes Finish passend zum Werksempfänger.
27.9EUR627,90 €
*
Lieferzeit ca. 14-21 Werktage. 6 Stk. im Lager USA
Eigenschaften:Color: BlackMarke: RugerMaterial: AluminumModell: 10/22Number of Bases: 1-PieceStyle: Weaver-Style Bases
Quickly attaches to factory drilled and tapped 10/22® receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver.
SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75" (12cm) long. Includes screws and Allen wrench.
Mehr...
Vielseitige Halterung für kompakte Zielfernrohre und Visiere
Schnelle Befestigung an werkseitig gebohrten und mit Gewinde versehenen 10/22®-Empfängern. Sechs Kreuzschlitze bieten die Vielseitigkeit, Zielfernrohre in voller Größe sowie Leuchtpunktvisiere oder kompakte Zielfernrohre mit Ringen im Weaver-Stil zu montieren. Silber eloxiert oder hartbeschichtet, schwarzes Finish passend zum Werksempfänger.
TECHNISCHE DATEN: T6061 Aluminium, silberfarben, eloxiert oder hartbeschichtet, schwarz lackiert. 12 cm lang. Inklusive Schrauben und Inbusschlüssel.
Mehr...
Kundenbewertungen zu POWER CUSTOM SILVER 10/22® RECEIVER MOUNT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4
Beats factory dovetail mount hands down.(11.12.2009)
This is a top notch, made in the U.S.A. no nonsense mount. The finish matches the reciever finish perfectly. If you are tired of your rings slipping forward on the factory dovetail style mount, this is the mount for you. It attaches to the reciever with allen screws. Keep in mind that it is about 3/8" taller than the factory mount, when selecting rings.
No screws, but otherwise an OK mount.(23.05.2015)
This mount is advertised as including the mounting screws. Mine arrived sealed in the package, but there were no screws. I don't fault Brownells because Power Custom's website also says the product includes screws. Appears someone neglected to put the screws in the package. I emailed Power Custom through their website and asked for the screws, but received no response other than a confirmation that they received my submission. Requires a longer 6-48 flat head screw than the typical scope mount screw. The mount appears to be fair quality. Matches the receiver color well. Made in China. I probably would not buy this one again.