Cushions Slide Impact For Less Wear & Reduced Felt Recoil
Polyurethane buffer cushions the impact of the slide against the frame during recoil, resulting in less wear to the gun, less fatigue on the hand and arm, and less muzzle rise. Reduces felt recoil so you can get back on target quickly for faster, more accurate follow-up shots. Each buffer is precision CNC cut from a sheet of ultra-tough, tear-resistant polyurethane. Drop-in installation without any permanent alteration to the firearm.
SPECS: Polyurethane, clear.
Mehr...
Cushions Slide Impact für weniger Verschleiß und weniger Rückstoß
Polyurethanpuffer dämpft den Aufprall des Schlittens auf den Rahmen während des Rückstoßes, was zu weniger Verschleiß der Waffe, weniger Ermüdung an Hand und Arm und weniger Mündungsanstieg führt. Reduziert den Rückstoß des Filzes, sodass Sie schnell wieder zum Ziel zurückkehren können, um schnellere und genauere Folgeschüsse zu erhalten. Jeder Puffer ist ein Präzisions-CNC-Schnitt aus einer Folie aus extrem zähem, reißfestem Polyurethan. Drop-In-Installation ohne dauerhafte Änderung der Waffe.
"GLOCK" ist eine bundesweit eingetragene Marke von Glock, Inc. und eine von vielen Marken von Glock, Inc. oder Glock Ges.m.b.H. Brownells ist ein unabhängiger Händler von Teilen und Zubehör für Glock®-Pistolen und steht in keiner Beziehung zu Glock, Inc. oder Glock Ges.m.b.H. Die Verwendung von Glock auf dieser Seite dient lediglich dazu, für den Verkauf von Glock-Teilen oder -Komponenten zu werben. Wie in den Produktbeschreibungen angegeben, sind nicht alle Teile und Zubehörteile auf dieser Website offizielle Glock-Produkte.
Technische Daten: Polyurethan, klar.
Mehr...
Kundenbewertungen zu BIANCO RECOIL BUFFER FOR GLOCK®
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3,6
Less wear and just as reliable.(15.02.2010)
I have two of these installed in different Beretta 92 models, one on a plastic guide rod and the other metal. I am nearing a thousand rounds on one and have not had any failures at all. These protect your frame from being battered by the slide and should in theory greatly increase the life of your pistol. Even if you are heistant to use them on a defensive pistol, they are so easy to install it can be put in for every range session.
Should work as advertised(02.04.2012)
It installed very easily, self centered and takes the 'slam' of metal on metal out of the action noticably. Even when hand cycling! And Brownells shipping dept. rocks!! I got this, and my last order, in two days on parcel post!!
Easily applied and installed quickly.(16.04.2012)
Looking forward to shooting it, fit well and easy.
O.K. product(01.08.2012)
The buffer moves along the guide rod, it doesn't stay put. You'll notice a positive difference when cycling the receiver, you won't feel metal on metal. But if the piece fails (breaks) during the firing process what'll happen?
Works as promised(10.05.2017)
It requires a bit of extra care when field stripping and reassembling to make sure it goes in correctly, but once installed it definitely reduces the metal on metal impact, cycles fine, and seems like a great idea to lengthen the life of your pistol. Thousands of rounds fired no issues.
Artikel-Nr.: 100004730 BIANCO RECOIL BUFFER FOR GLOCK® Herstellerproduktnummer: NONE Polyurethanpuffer dämpft den Aufprall des Schlittens auf den Rahmen während des Rückstoßes, was zu weniger Verschleiß der Waffe, weniger Ermüdung an Hand und Arm und weniger Mündungsanstieg führt. Reduziert den Rückstoß des Filzes, sodass Sie schnell wieder zum Ziel zurückkehren können, um schnellere und genauere Folgeschüsse zu erhalten. Jeder Puffer ist ein Präzisions-CNC-Schnitt aus einer Folie aus extrem zähem, reißfestem Polyurethan. Drop-In-Installation ohne dauerhafte Änderung der Waffe.
15.4EUR115,40 €
*
Lieferzeit ca. 14-21 Werktage. 1 Stk. im Lager USA
Cushions Slide Impact For Less Wear & Reduced Felt Recoil
Polyurethane buffer cushions the impact of the slide against the frame during recoil, resulting in less wear to the gun, less fatigue on the hand and arm, and less muzzle rise. Reduces felt recoil so you can get back on target quickly for faster, more accurate follow-up shots. Each buffer is precision CNC cut from a sheet of ultra-tough, tear-resistant polyurethane. Drop-in installation without any permanent alteration to the firearm.
SPECS: Polyurethane, clear.
Mehr...
Cushions Slide Impact für weniger Verschleiß und weniger Rückstoß
Polyurethanpuffer dämpft den Aufprall des Schlittens auf den Rahmen während des Rückstoßes, was zu weniger Verschleiß der Waffe, weniger Ermüdung an Hand und Arm und weniger Mündungsanstieg führt. Reduziert den Rückstoß des Filzes, sodass Sie schnell wieder zum Ziel zurückkehren können, um schnellere und genauere Folgeschüsse zu erhalten. Jeder Puffer ist ein Präzisions-CNC-Schnitt aus einer Folie aus extrem zähem, reißfestem Polyurethan. Drop-In-Installation ohne dauerhafte Änderung der Waffe.
"GLOCK" ist eine bundesweit eingetragene Marke von Glock, Inc. und eine von vielen Marken von Glock, Inc. oder Glock Ges.m.b.H. Brownells ist ein unabhängiger Händler von Teilen und Zubehör für Glock®-Pistolen und steht in keiner Beziehung zu Glock, Inc. oder Glock Ges.m.b.H. Die Verwendung von Glock auf dieser Seite dient lediglich dazu, für den Verkauf von Glock-Teilen oder -Komponenten zu werben. Wie in den Produktbeschreibungen angegeben, sind nicht alle Teile und Zubehörteile auf dieser Website offizielle Glock-Produkte.
Technische Daten: Polyurethan, klar.
Mehr...
Kundenbewertungen zu BIANCO RECOIL BUFFER FOR GLOCK®
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3,6
Less wear and just as reliable.(15.02.2010)
I have two of these installed in different Beretta 92 models, one on a plastic guide rod and the other metal. I am nearing a thousand rounds on one and have not had any failures at all. These protect your frame from being battered by the slide and should in theory greatly increase the life of your pistol. Even if you are heistant to use them on a defensive pistol, they are so easy to install it can be put in for every range session.
Should work as advertised(02.04.2012)
It installed very easily, self centered and takes the 'slam' of metal on metal out of the action noticably. Even when hand cycling! And Brownells shipping dept. rocks!! I got this, and my last order, in two days on parcel post!!
Easily applied and installed quickly.(16.04.2012)
Looking forward to shooting it, fit well and easy.
O.K. product(01.08.2012)
The buffer moves along the guide rod, it doesn't stay put. You'll notice a positive difference when cycling the receiver, you won't feel metal on metal. But if the piece fails (breaks) during the firing process what'll happen?
Works as promised(10.05.2017)
It requires a bit of extra care when field stripping and reassembling to make sure it goes in correctly, but once installed it definitely reduces the metal on metal impact, cycles fine, and seems like a great idea to lengthen the life of your pistol. Thousands of rounds fired no issues.