Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

STRIKE INDUSTRIES
SHOTGUN BARREL CLAMP 12-GAUGE BLACK

793811766035 430105358
The Strike Shotgun Barrel Clamp for 12-Guage helps to add strength and rigidity to your feed tubs with the ability to add accessories and a sling point. One side of the barrel clamp features a Picatinny (Pic) rail to mount a weapon light or other accessory. On the other side you have a 360° free swivel quick detach (QD) socket for an easy sling attachment point. The user can pick which side you want the Pic rail or QD to be. Compatible with the most common 12-Guage barrels and feed tubes, this lightweight barrel clamp is machined from 6061-T6 aluminum. This Strike Shotgun Barrel Clamp for 12-Guage provides additional support for your magazine feed tubes with the bonus of having a QD sling point on one side and a Picatinny rail accessory on the other that is quick and easy to install. Available in anodized SI BLACKLINE, FDELINE or TITAN EDITION colors. COMPATIBILITY: 12-Gauge models only Benelli M2/M4 Remington 870 Possibly other 12-Gauge shotguns not officially tested by SI NOT COMPATIBLE: With some special version models even mentioned above Mossberg 500, 930 Package Contents: x1 Strike Shotgun Barrel Clamp QD side x1 Strike Shotgun Barrel Clamp Picatinny side x2 Set screw (M5x14mm) x1 Hex tool [4mm] x1 Loctite® Threadlocker Blue 243® x1 Warning card Product Features: Picatinny rail to mount a weapon light or other accessory 360° free swivel QD socket for an easy sling attachment point Quick and easy installation with rail or QD socket on either side Compatible with most common 12-Gauge barrels and feed tubes Lightweight and high-strength Machined from 6061-T6 aluminum WARNING: Due to metal on metal contact, there is always a chance of marring finish/coating Before every use, always check proper function of your QD mount and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
63.9 63.9 1 EUR
Artikel-Nr.: 430105358
STRIKE INDUSTRIES SHOTGUN BARREL CLAMP FOR 12-GAUGE IN BLACK 793811766035 Die Strike-Schrotflintenlaufklemme für Kaliber 12 trägt dazu bei, Ihren Futterwannen Festigkeit und Steifigkeit zu verleihen, da sie die Möglichkeit bietet, Zubehör und einen Anschlagpunkt hinzuzufügen. Eine Seite der Laufklemme verfügt über eine Picatinny-Schiene (Pic), um eine Waffenlampe oder anderes Zubehör zu befestigen. Auf der anderen Seite befindet sich eine um 360° frei drehbare Quick-Detach-Buchse (QD) für einen einfachen Befestigungspunkt für die Schlinge. Der Benutzer kann auswählen, auf welcher Seite die Pic-Schiene oder das QD sein soll. Diese leichte Fassklemme ist mit den gängigsten 12-Gauge-Läufen und Zufuhrrohren kompatibel und aus 6061-T6-Aluminium gefertigt. Diese Strike-Schrotflintenlaufklemme für Kaliber 12 bietet zusätzlichen Halt für Ihre Magazinzuführungsrohre und hat den Vorteil, dass sie auf der einen Seite über einen QD-Schlingpunkt und auf der anderen über ein Picatinny-Schienenzubehör verfügt, das schnell und einfach zu installieren ist. Erhältlich in den eloxierten Farben SI BLACKLINE, FDELINE oder TITAN EDITION.KOMPATIBILITÄT: Nur 12-Gauge-Modelle, Benelli M2/M4 Remington 870, möglicherweise andere 12-Gauge-Schrotflinten, die nicht offiziell von SI getestet wurden Schließfach Blau 243® x1 Warnkarte Produktmerkmale: Picatinny-Schiene zur Montage einer Waffenlampe oder eines anderen Zubehörs 360° frei drehbare QD-Buchse für einen einfachen Befestigungspunkt für die Schlinge Schnelle und einfache Installation mit Schiene oder QD-Buchse auf beiden Seiten Kompatibel mit den meisten gängigen 12-Gauge-Läufen und Zufuhrrohren Leicht und hochfest Hergestellt aus 6061-T6-Aluminium WARNUNG: Aufgrund des Kontakts von Metall auf Metall besteht immer die Möglichkeit, dass die Oberfläche/Beschichtung beschädigt wird. Überprüfen Sie vor jedem Gebrauch immer die ordnungsgemäße Funktion von Ihre QD-Halterung und etwaige Abnutzungserscheinungen durch den Gebrauch. Halten Sie Ihre Waffe immer in der SICHEREN Position, wenn nicht abgefeuert wird. Befolgen Sie stets alle Sicherheitsregeln für Schusswaffen und richten Sie Ihre Waffe niemals auf etwas, das Sie nicht zerstören möchten. Weitere Informationen: www.P65Warnings.ca.gov
63.9 EUR 0 63,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften

Versandgewicht: 0,077kg Versandhöhe: 38mm Versandbreite: 51mm Versandlänge: 102mm




The Strike Shotgun Barrel Clamp for 12-Guage helps to add strength and rigidity to your feed tubs with the ability to add accessories and a sling point. One side of the barrel clamp features a Picatinny (Pic) rail to mount a weapon light or other accessory. On the other side you have a 360° free swivel quick detach (QD) socket for an easy sling attachment point. The user can pick which side you want the Pic rail or QD to be. Compatible with the most common 12-Guage barrels and feed tubes, this lightweight barrel clamp is machined from 6061-T6 aluminum. This Strike Shotgun Barrel Clamp for 12-Guage provides additional support for your magazine feed tubes with the bonus of having a QD sling point on one side and a Picatinny rail accessory on the other that is quick and easy to install. Available in anodized SI BLACKLINE, FDELINE or TITAN EDITION colors. COMPATIBILITY: 12-Gauge models only Benelli M2/M4 Remington 870 Possibly other 12-Gauge shotguns not officially tested by SI NOT COMPATIBLE: With some special version models even mentioned above Mossberg 500, 930 Package Contents: x1 Strike Shotgun Barrel Clamp QD side x1 Strike Shotgun Barrel Clamp Picatinny side x2 Set screw (M5x14mm) x1 Hex tool [4mm] x1 Loctite® Threadlocker Blue 243® x1 Warning card Product Features: Picatinny rail to mount a weapon light or other accessory 360° free swivel QD socket for an easy sling attachment point Quick and easy installation with rail or QD socket on either side Compatible with most common 12-Gauge barrels and feed tubes Lightweight and high-strength Machined from 6061-T6 aluminum WARNING: Due to metal on metal contact, there is always a chance of marring finish/coating Before every use, always check proper function of your QD mount and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Newsletter