One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four slotted flat head screws and washers secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Fits factory drilled and tapped receivers. Includes mounting hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 1997 and later-mfr pump action shotguns; can be installed on 930 semi-auto with additional fitting. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on round-top M1 after drilling and tapping receiver. Comes with 4 slotted flat head screws and 4 washers.
Mehr...
Bringen Sie Optik oder taktische Anblicke an
Die einteilige Picatinny-Schiene MIL-STD 1913 ermöglicht die Montage einer Vielzahl von Optiken und taktischen Zielen an den beliebten Mossberg-, Remington- und Benelli-Schrotflinten. Das schlanke, flache Design wird auf der Oberseite des Empfängers installiert und sorgt so für ein reibungsloses „eingebautes“ Erscheinungsbild. Vier Schlitzschrauben und Unterlegscheiben sichern die Schiene am Empfänger für außergewöhnliche Haltekraft. Präzisionsgefertigt aus 6061-T6 Aluminium, anschließend für zusätzliche Festigkeit anodisierter Mil-Spec-Typ-III-Hartlack. Passt zu Schrotflinten mit werkseitig gebohrten und gewindebohrten Empfängern oder Empfängern nach Kundenwunsch, bei denen für geeignete Gewinde gebohrt und gewindebohrt werden muss.
TECHNISCHE DATEN: 6061 T6 Aluminium, Typ III hart eloxiert, mattschwarz. Passend für werkseitig gebohrte und mit Gewinde versehene Empfänger. Inklusive Montagematerial und Anleitung. Mossberg - 13,9 cm (5½ ") lang. Für Pump-Action-Schrotflinten ab 1997; kann mit zusätzlicher Befestigung auf dem 930 Semi-Auto installiert werden. Remington 870 - Erhältlich in 13,9 cm (5½") (Empfängerlänge). Drop-In Fit bis 870; Kann mit zusätzlicher Befestigung auf 1100 oder 11-87 semi-auto installiert werden. Kommt mit 6-48 Schrauben. Benelli M2 - 4½ "(11,4 cm) lang. Drop-in-Passform für M2 Tactical; kann nach dem Bohren und Gewindeschneiden des Empfängers auch auf der runden M1 installiert werden. Mit 4 Schlitzschrauben und 4 Unterlegscheiben.
Mehr...
Kundenbewertungen zu MESA TACTICAL PRODUCTS MOSSBERG 500 RECEIVER RAIL
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,4
Nice Rail(02.10.2012)
This is a well made rail. It was a good match to the top of the Rem. 870 receiver. The only down-side was that it wasn't supplied with 8-40 hardware as advertised, but 6-48 screws. I had to spend a little more time hunting up the correct tap.
Mesa Tactical should also add a schematic that shows the hole spacing (center to center). This would save the gunsmith some time and eliminate one spot where he might make a mistake.
A good product at a good price.(25.08.2015)
Australian Border force that were Australian Customs and Border Security have commissioned me to put a receiver rail on some of their shotguns for them to assess their suitability as a tactical shotgun base for their shotguns.
I found that the front screw was a bit short and I had to deepen the front screw hole to ensure full engagement of the screw.
Other that that I am pleased with this product and am sure we will be ordering more in the near future.
We have to order under $100 US and that is inconvenient but that is the law.
Awesome Product(09.08.2017)
Had a Remington Wingmaster come into the shop to get Cerakote and have a rail installed on it. Went with this Mesa Tactical one caused it looked pretty well built. Got it in and was able to install it. It fit like a glove and the screws were all sized to length, even the one the goes over the barrel and bolt. All I had to do was drill and tap the holes. Great product.
Works as advertised(07.09.2009)
Not much to it, a rail and 4 screws. I bought this knowing I would have to tap the receiver of my 870 to mount it. The rail looks good on the receiver and holds my Aimpoint in place. The hardest part of the install was finding the tap (my snapon set didn't have it) and making sure that the rail is straight. It required fitting on my gun since it wasn't tapped from the factory. Overall, recommend.
Just what I needed(09.06.2010)
I used this rail for my Mossberg 590 and I didnt need to tap anything on my receiver. There were pre drilled holes already on the top of the receiver and they fit perfectly.
Artikel-Nr.: 100004034 MESA TACTICAL PRODUCTS MOSSBERG 500 RECEIVER RAIL Herstellerproduktnummer: 90770400000089041 Die einteilige Picatinny-Schiene MIL-STD 1913 ermöglicht die Montage einer Vielzahl von Optiken und taktischen Zielen an den beliebten Mossberg-, Remington- und Benelli-Schrotflinten. Das schlanke, flache Design wird auf der Oberseite des Empfängers installiert und sorgt so für ein reibungsloses „eingebautes“ Erscheinungsbild. Vier Schlitzschrauben und Unterlegscheiben sichern die Schiene am Empfänger für außergewöhnliche Haltekraft. Präzisionsgefertigt aus 6061-T6 Aluminium, anschließend für zusätzliche Festigkeit anodisierter Mil-Spec-Typ-III-Hartlack. Passt zu Schrotflinten mit werkseitig gebohrten und gewindebohrten Empfängern oder Empfängern nach Kundenwunsch, bei denen für geeignete Gewinde gebohrt und gewindebohrt werden muss.
Color:
Black
Marke:
Mossberg
Material:
Aluminum
Modell:
Universal Shotguns
Number of Bases:
1-Piece
Style:
Tactical Bases
Versandgewicht: 0,045kgVersandhöhe: 15mmVersandbreite: 117mmVersandlänge: 142mm
Artikel-Nr.: 100005803 MESA TACTICAL PRODUCTS BENELLI M2 RECEIVER RAIL Herstellerproduktnummer: 92390878405001041 Die einteilige Picatinny-Schiene MIL-STD 1913 ermöglicht die Montage einer Vielzahl von Optiken und taktischen Zielen an den beliebten Mossberg-, Remington- und Benelli-Schrotflinten. Das schlanke, flache Design wird auf der Oberseite des Empfängers installiert und sorgt so für ein reibungsloses „eingebautes“ Erscheinungsbild. Vier Schlitzschrauben und Unterlegscheiben sichern die Schiene am Empfänger für außergewöhnliche Haltekraft. Präzisionsgefertigt aus 6061-T6 Aluminium, anschließend für zusätzliche Festigkeit anodisierter Mil-Spec-Typ-III-Hartlack. Passt zu Schrotflinten mit werkseitig gebohrten und gewindebohrten Empfängern oder Empfängern nach Kundenwunsch, bei denen für geeignete Gewinde gebohrt und gewindebohrt werden muss.
One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four slotted flat head screws and washers secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Fits factory drilled and tapped receivers. Includes mounting hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 1997 and later-mfr pump action shotguns; can be installed on 930 semi-auto with additional fitting. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on round-top M1 after drilling and tapping receiver. Comes with 4 slotted flat head screws and 4 washers.
Mehr...
Bringen Sie Optik oder taktische Anblicke an
Die einteilige Picatinny-Schiene MIL-STD 1913 ermöglicht die Montage einer Vielzahl von Optiken und taktischen Zielen an den beliebten Mossberg-, Remington- und Benelli-Schrotflinten. Das schlanke, flache Design wird auf der Oberseite des Empfängers installiert und sorgt so für ein reibungsloses „eingebautes“ Erscheinungsbild. Vier Schlitzschrauben und Unterlegscheiben sichern die Schiene am Empfänger für außergewöhnliche Haltekraft. Präzisionsgefertigt aus 6061-T6 Aluminium, anschließend für zusätzliche Festigkeit anodisierter Mil-Spec-Typ-III-Hartlack. Passt zu Schrotflinten mit werkseitig gebohrten und gewindebohrten Empfängern oder Empfängern nach Kundenwunsch, bei denen für geeignete Gewinde gebohrt und gewindebohrt werden muss.
TECHNISCHE DATEN: 6061 T6 Aluminium, Typ III hart eloxiert, mattschwarz. Passend für werkseitig gebohrte und mit Gewinde versehene Empfänger. Inklusive Montagematerial und Anleitung. Mossberg - 13,9 cm (5½ ") lang. Für Pump-Action-Schrotflinten ab 1997; kann mit zusätzlicher Befestigung auf dem 930 Semi-Auto installiert werden. Remington 870 - Erhältlich in 13,9 cm (5½") (Empfängerlänge). Drop-In Fit bis 870; Kann mit zusätzlicher Befestigung auf 1100 oder 11-87 semi-auto installiert werden. Kommt mit 6-48 Schrauben. Benelli M2 - 4½ "(11,4 cm) lang. Drop-in-Passform für M2 Tactical; kann nach dem Bohren und Gewindeschneiden des Empfängers auch auf der runden M1 installiert werden. Mit 4 Schlitzschrauben und 4 Unterlegscheiben.
Mehr...
Kundenbewertungen zu MESA TACTICAL PRODUCTS MOSSBERG 500 RECEIVER RAIL
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,4
Nice Rail(02.10.2012)
This is a well made rail. It was a good match to the top of the Rem. 870 receiver. The only down-side was that it wasn't supplied with 8-40 hardware as advertised, but 6-48 screws. I had to spend a little more time hunting up the correct tap.
Mesa Tactical should also add a schematic that shows the hole spacing (center to center). This would save the gunsmith some time and eliminate one spot where he might make a mistake.
A good product at a good price.(25.08.2015)
Australian Border force that were Australian Customs and Border Security have commissioned me to put a receiver rail on some of their shotguns for them to assess their suitability as a tactical shotgun base for their shotguns.
I found that the front screw was a bit short and I had to deepen the front screw hole to ensure full engagement of the screw.
Other that that I am pleased with this product and am sure we will be ordering more in the near future.
We have to order under $100 US and that is inconvenient but that is the law.
Awesome Product(09.08.2017)
Had a Remington Wingmaster come into the shop to get Cerakote and have a rail installed on it. Went with this Mesa Tactical one caused it looked pretty well built. Got it in and was able to install it. It fit like a glove and the screws were all sized to length, even the one the goes over the barrel and bolt. All I had to do was drill and tap the holes. Great product.
Works as advertised(07.09.2009)
Not much to it, a rail and 4 screws. I bought this knowing I would have to tap the receiver of my 870 to mount it. The rail looks good on the receiver and holds my Aimpoint in place. The hardest part of the install was finding the tap (my snapon set didn't have it) and making sure that the rail is straight. It required fitting on my gun since it wasn't tapped from the factory. Overall, recommend.
Just what I needed(09.06.2010)
I used this rail for my Mossberg 590 and I didnt need to tap anything on my receiver. There were pre drilled holes already on the top of the receiver and they fit perfectly.