Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Mehr...
Übergroß, mit geriffelter Oberfläche für schnelles Laden und Beseitigen von Papierstaus
Der einfach zu installierende, übergroße Ladegriff hilft Ihnen, Papierstaus zu beseitigen und eine Kammer schnell und effizient auszuwerfen. Die maschinell bearbeitete Stahlkonstruktion mit ihrer markanten röhrenförmigen Form und den tiefen Korkenzieher-Rillen sorgt für einen hervorragenden Kauf und ein stilvolles Aussehen. Kein Waffenschmieden erforderlich.
TECHNISCHE DATEN: Stahl, mattschwarzes Finish. Benelli / Beretta passt für Benelli M1 / M2 (12/20 Gauge) und Beretta Extrema. Rem. passend für Remington 12 Gauge 1100 und 11-87. Win./FN passt für Winchester SX2 / SX3, FN SLP und Browning Silver.
Mehr...
Kundenbewertungen zu NORDIC COMPONENTS SPEED BOLT HANDLE, WINCHESTER/FN
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,4
Awesome(17.05.2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23.09.2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12.01.2013)
Way better than expected!!!!
Thoroughly impressive(15.01.2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03.04.2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.
Artikel-Nr.: 100005454 NORDIC COMPONENTS SPEED BOLT HANDLE, WINCHESTER/FN Herstellerproduktnummer: BOH-SX816696021270 Der einfach zu installierende, übergroße Ladegriff hilft Ihnen, Papierstaus zu beseitigen und eine Kammer schnell und effizient auszuwerfen. Die maschinell bearbeitete Stahlkonstruktion mit ihrer markanten röhrenförmigen Form und den tiefen Korkenzieher-Rillen sorgt für einen hervorragenden Kauf und ein stilvolles Aussehen. Kein Waffenschmieden erforderlich.
72.9EUR472,90 €
*
Lieferzeit ca. 14-21 Werktage. 4 Stk. im Lager USA
Eigenschaften:Marke: Winchester, FNModell: Super X-2, SLP, SX2, SX3, SLP Mark IOberfläche: Black
Marke:
Winchester,FN
Modell:
SLP,SX2,SX3,Super X-2,SLP Mark I
Oberfläche:
Black
Versandgewicht: 0,045kgVersandhöhe: 1mmVersandbreite: 57mmVersandlänge: 146mm
Artikel-Nr.: 100005452 NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA Herstellerproduktnummer: BOHBN816696021249 Der einfach zu installierende, übergroße Ladegriff hilft Ihnen, Papierstaus zu beseitigen und eine Kammer schnell und effizient auszuwerfen. Die maschinell bearbeitete Stahlkonstruktion mit ihrer markanten röhrenförmigen Form und den tiefen Korkenzieher-Rillen sorgt für einen hervorragenden Kauf und ein stilvolles Aussehen. Kein Waffenschmieden erforderlich.
67.9EUR367,90 €
*
Lieferzeit ca. 14-21 Werktage. 3 Stk. im Lager USA
Eigenschaften:Marke: Beretta, BenelliModell: M1, M2, AL391 XtremaOberfläche: Black
Artikel-Nr.: 100005453 NORDIC COMPONENTS SPEED BOLT HANDLE, REMINGTON Herstellerproduktnummer: BOHRM816696021263 Der einfach zu installierende, übergroße Ladegriff hilft Ihnen, Papierstaus zu beseitigen und eine Kammer schnell und effizient auszuwerfen. Die maschinell bearbeitete Stahlkonstruktion mit ihrer markanten röhrenförmigen Form und den tiefen Korkenzieher-Rillen sorgt für einen hervorragenden Kauf und ein stilvolles Aussehen. Kein Waffenschmieden erforderlich.
Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Mehr...
Übergroß, mit geriffelter Oberfläche für schnelles Laden und Beseitigen von Papierstaus
Der einfach zu installierende, übergroße Ladegriff hilft Ihnen, Papierstaus zu beseitigen und eine Kammer schnell und effizient auszuwerfen. Die maschinell bearbeitete Stahlkonstruktion mit ihrer markanten röhrenförmigen Form und den tiefen Korkenzieher-Rillen sorgt für einen hervorragenden Kauf und ein stilvolles Aussehen. Kein Waffenschmieden erforderlich.
TECHNISCHE DATEN: Stahl, mattschwarzes Finish. Benelli / Beretta passt für Benelli M1 / M2 (12/20 Gauge) und Beretta Extrema. Rem. passend für Remington 12 Gauge 1100 und 11-87. Win./FN passt für Winchester SX2 / SX3, FN SLP und Browning Silver.
Mehr...
Kundenbewertungen zu NORDIC COMPONENTS SPEED BOLT HANDLE, WINCHESTER/FN
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,4
Awesome(17.05.2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23.09.2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12.01.2013)
Way better than expected!!!!
Thoroughly impressive(15.01.2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03.04.2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.