Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

EGW
SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VORTEX VENOM

841370111978 296000649
The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
0 0 1 EUR
Artikel-Nr.: 296000649
EGW SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VENOM
Herstellerproduktnummer: 49201 841370111978 Die Visierplatte an Ihrer Waffe muss entfernt werden, um Ihren roten Punkt auf dieser Platte zu installieren. Die Platte wird mit den mitgelieferten 4-40 Schrauben von der Unterseite des Schlittens am Schlitten befestigt. Der Red Dot wird dann mit den mitgelieferten 6-32 Schrauben oben auf der Adapterplatte montiert. Montageanleitung Diopter entfernen* Montieren Sie die EGW-Visierhalterung im Schwalbenschwanz Platzieren Sie das Leuchtpunktvisier auf der EGW-Visierhalterung (ein kleines Stück Papier zwischen Leuchtpunktvisier und Visierhalterung zu legen erleichtert das Entfernen und hält Loctite vom Rotpunktvisier entfernt.) Tragen Sie blaues Loctite auf die mitgelieferten Befestigungsschrauben auf. Ziehen Sie die Befestigungsschrauben mit einem Drehmoment von 15 in/lbs an. Modifikationen an Ihrer Waffe können zum Erlöschen der Herstellergarantie führen. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Für Schäden oder Verletzungen, die aus einer unsachgemäßen Installation oder Verwendung dieses Produkts resultieren, wird keine ausdrückliche oder stillschweigende Haftung übernommen. Dosis funktioniert nicht mit Sig P320RX, P320 X-Five W/Romeo1 Cut oder M17 Military Surplus.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Color: Black Marke: Sig Sauer Material: Aluminum Modell: P320 X-Five, M17, M18 Number of Bases: 1-Piece Style: Adapter Bases

Eigenschaften

Color: Black Marke: Sig Sauer Material: Aluminum Modell: M18,P320 X-Five,M17 Number of Bases: 1-Piece Style: Adapter Bases Versandgewicht: 0,045kg Versandhöhe: 25mm Versandbreite: 51mm Versandlänge: 140mm




The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
Newsletter