SPB MUZZLE BRAKES These fit the plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH H900 Atlas and Atlas XL Compatible Plan B Compatible Atlas Adapter Overrun Approximately 1.050″ Atlas XL Adapter No Overrun Black Nitride Finish (67 HRC Surface Hardness) Shims Included* EXCEPT *Shims not included with the SR25/M110 or 11/16×24
Verbessere deine Schießleistung mit den SPB Muzzle Brakes!
Die SPB MUZZLE BRAKES passen perfekt auf die Plan B Montagen. Achte darauf, immer einen Ausrichtungsstab zu verwenden, um sicherzustellen, dass das gesamte System korrekt eingerichtet ist.
- Reinige alle Oberflächen gründlich.
- Das Mündungsgerät muss mit dem Lauf torqued und mit Rockset gesichert werden.
- Die Verwendung eines Q-Dämpfers kann deine Garantie ungültig machen – sei gewarnt.
- Torque das Mündungsgerät auf etwa 15-25 ft lbs.
- Stelle sicher, dass das Mündungsgerät rechtwinklig zur Schulter ist.
- Beim Anbringen des Schalldämpfers auf das Mündungsgerät, achte darauf, dass die Gewinde und Konen sauber sind.
- Torque den Schalldämpfer auf 10 ft lbs und achte auf die Ausrichtung.
Genieße die verbesserte Leistung! Die Nitride-Beschichtung sorgt für eine bessere Abdichtung, daher ist es extrem wichtig, dein Mündungsgerät korrekt am Lauf zu torqued und mit Rockset zu sichern.
Merkmale:
- 17-4 PH H900
- Kompatibel mit Atlas und Atlas XL
- Plan B kompatibel
- Atlas Adapter Überlauf ca. 1.050″
- Atlas XL Adapter ohne Überlauf
- Schwarze Nitride-Oberfläche (67 HRC Oberflächenhärte)
- Shims inklusive, außer für SR25/M110 oder 11/16×24