The top of the Panel features a custom double pull, separating zipper. This zipper serves three purposes. It allows the Flaps to be completely removed from the Core and swapped out. It allows communication antennas and other items such as cabling, hydration tubes, and breaching tools to be routed into and out of the top of the panel. It provides quick access to the inside of the panel without lifting the entire Flap. The Assault Panel Core also has three direction snaps to hold Flaps securely on and to keep tools held inside the panel. The Assault Panel Core features 4 external attachment zippers. These zippers allow the panel to be worn in three configurations. Configuration 1 uses the top zippers to attach the panel to the plate bag. This compresses the panel and allows the panel to be worn in a "light" configuration. This configuration of the panel is great for assaulters who want a streamlined and tight configuration and only need to carry things like a small hydration bladder, slap charges, flash bangs and GP kit on their backs. Configuration 2 uses the bottom zippers to attach the panel to the plate bag. This configuration gives the user much more capacity and configures the panel into more of a backpack. This provides the same features as Configuration 1, but with the added volume for bulky items such as radios, cold weather gear, poll less litters, etc. Configuration 3 also uses the bottom zippers to attach to the rear plate bag, but introduces the bottom expansion as well. This expansion offers the ability to carry longer tools and store even more bulky items in the expanded space. The Assault Panel Core comes standard with a permanently affixed large GP pocket on the lower half. This pocket is velcro lined for attachment of accessory items. It features a total of two tie down locations inside the pouch for securing sensitive equipment. The front of the pouch features a zippered stash pocket for organizing smaller, commonly needed items. This pocket also has a 4" x 5" Velcro Field for attaching identification patches. Behind the GP pocket is a hidden stash compartment. This is used for storing the lower half of slap charges or breach pens when they are passed through the flaps above. It can also be used to stash E&E equipment or smaller personal items. Each side of the panel features six tie down loops for securing longer items external to the panel. These loops are great for attaching Tri-Fold or Bi-Fold charges or other tall items. The bottom expansion has a G-Hook internal to the panel that allows you to secure it in place if a heavier load needs to be carried inside, but you do not want the expansion to deploy inadvertently. Fitment Guide Medium Overt Plate Bags - Fits Large Overt Plate Bags - Fits, could use an XL Adapter if you have very thick plates, and are overloading the panel. Extra Large Overt Plate Bags - Needs an XL Adapter to be compatible with the XL Plate Bags. Some images shown with optional accessories, sold separately.
Entdecke das Assault Back Panel Core von SPIRITUS SYSTEMS!
Das Assault Back Panel Core ist ein vielseitiges und innovatives Produkt, das dir hilft, deine Ausrüstung effizient zu organisieren und zu transportieren.
Produktbeschreibung
Die Oberseite des Panels verfügt über einen maßgeschneiderten Doppelreißverschluss, der drei Funktionen erfüllt:
- Er ermöglicht es, die Flaps vollständig vom Core zu entfernen und auszutauschen.
- Er erlaubt es, Kommunikationsantennen und andere Gegenstände wie Kabel, Hydratationsschläuche und Durchbruchswerkzeuge durch die Oberseite des Panels zu führen.
- Er bietet schnellen Zugang zum Inneren des Panels, ohne die gesamte Flap anzuheben.
Das Assault Panel Core hat außerdem drei Richtungsschnappverschlüsse, um die Flaps sicher zu halten und Werkzeuge im Inneren des Panels zu befestigen. Es verfügt über 4 externe Befestigungsreißverschlüsse, die es ermöglichen, das Panel in drei Konfigurationen zu tragen:
- Konfiguration 1: Nutzt die oberen Reißverschlüsse, um das Panel an der Plattentasche zu befestigen. Dies komprimiert das Panel und ermöglicht es, in einer "leichten" Konfiguration getragen zu werden. Ideal für Assaulters, die eine schlanke und enge Konfiguration wünschen und nur Dinge wie eine kleine Hydratationstasche, Sprengladungen, Blitzgranaten und ein GP-Kit transportieren müssen.
- Konfiguration 2: Nutzt die unteren Reißverschlüsse, um das Panel an der Plattentasche zu befestigen. Diese Konfiguration bietet dem Benutzer viel mehr Kapazität und verwandelt das Panel in eine Art Rucksack. Sie bietet die gleichen Funktionen wie Konfiguration 1, jedoch mit zusätzlichem Volumen für sperrige Gegenstände wie Funkgeräte, Kältebekleidung, pollenlose Tragen usw.
- Konfiguration 3: Verwendet ebenfalls die unteren Reißverschlüsse zur Befestigung an der hinteren Plattentasche, führt jedoch auch die untere Erweiterung ein. Diese Erweiterung ermöglicht es, längere Werkzeuge zu transportieren und noch mehr sperrige Gegenstände im erweiterten Raum zu lagern.
Das Assault Panel Core kommt standardmäßig mit einer dauerhaft befestigten großen GP-Tasche auf der unteren Hälfte. Diese Tasche ist mit Klettverschluss ausgekleidet, um Zubehörteile zu befestigen. Sie verfügt über insgesamt zwei Befestigungspunkte im Inneren der Tasche, um empfindliche Geräte zu sichern. Die Vorderseite der Tasche hat eine Reißverschlusstasche zur Organisation kleiner, häufig benötigter Gegenstände und bietet ein 4" x 5" Klettfeld für die Anbringung von Identifikationspatches.
Hinter der GP-Tasche befindet sich ein verstecktes Staufach, das zum Aufbewahren der unteren Hälfte von Sprengladungen oder Durchbruchstiften verwendet wird, wenn sie durch die oben liegenden Flaps gereicht werden. Es kann auch verwendet werden, um E&E-Ausrüstung oder kleinere persönliche Gegenstände zu verstauen.
Jede Seite des Panels verfügt über sechs Befestigungsschlaufen, um längere Gegenstände extern am Panel zu sichern. Diese Schlaufen sind ideal zum Befestigen von Tri-Fold- oder Bi-Fold-Sprengladungen oder anderen hohen Gegenständen.
Die untere Erweiterung hat einen G-Haken im Inneren des Panels, der es dir ermöglicht, es an Ort und Stelle zu sichern, falls eine schwerere Last transportiert werden muss, aber du möchtest nicht, dass sich die Erweiterung unbeabsichtigt entfaltet.
Passformguide
- Medium Overt Plate Bags - Passt
- Large Overt Plate Bags - Passt, könnte einen XL Adapter benötigen, wenn du sehr dicke Platten hast und das Panel überlädst.
- Extra Large Overt Plate Bags - Benötigt einen XL Adapter, um mit den XL Plate Bags kompatibel zu sein.
Einige Bilder zeigen optionale Zubehörteile, die separat verkauft werden.