Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
708747547320 430105294
The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate, and remove the pins as shown. This new design combined with our enhanced detent pins retained inside the pin springs assist in making assembly and disassembly an almost effortless task with minimal tools and effort. The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers. DISCLAIMER: Due to the compact design of the PDW Stock and PDW Stabilizer, the SI Extended, Shift & Ultra Light Pivot / Takedown Pins, as well as other possible extended pin sets on the market, will bind or not clear the slide rods. Finish: Black: Black oxide Contents: 1x Pivot Pin 1x Takedown Pin Features: Less steps needed to remove pins Early tool less assembly and removal Combine with the enhanced detent pins for easier assembly and removal liminates the need for a pin punch. Locks into place securely. Innovative QD rotation feature NeQuick rifle assembly and disassembly Improved corrosion resistance Note: Designed around Forged Mil-Spec receivers. May not fit some billet lower receivers. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
38.9 38.9 1 EUR
Artikel-Nr.: 430105294
STRIKE INDUSTRIES AR-15 SHIFT PINS IN BLACK
Herstellerproduktnummer: SI-AR15-SHIFT-B 708747547320 Die Strike Industries Shift Pins bringen eine weitere innovative Lösung auf den AR15-Markt. Die Stifte verfügen bereits über eine verlängerte Grifffläche für eine einfache Demontage, ohne dass ein Splinttreiber erforderlich ist. Darüber hinaus sind die Stifte mit Quick-Detach-Mechanismen ausgestattet, die dazu führen, dass Sie Ihre Originalbaugruppe (Endplatte, Kronenmutter, Pufferrohr usw.) nicht entfernen müssen. Drehen Sie einfach und entfernen Sie die Stifte wie gezeigt. Dieses neue Design in Kombination mit unseren verbesserten Raststiften, die in den Stiftfedern gehalten werden, trägt dazu bei, dass die Montage und Demontage mit minimalem Werkzeug- und Aufwand zu einer nahezu mühelosen Aufgabe wird. Der SI-Schaltstift ist aus massivem Stahl CNC-gefräst und sorgt für Festigkeit, Präzisionspassung und Korrosionsbeständigkeit. Dies ist ein Ersatz für die Standard-AR15/M16/M4-Abnahmestifte und passt für die meisten AR-Standard- und Billet-Empfänger. HAFTUNGSAUSSCHLUSS: Aufgrund des kompakten Designs des PDW-Schafts und des PDW-Stabilisators blockieren die SI Extended-, Shift- und Ultra Light Pivot-/Takedown-Pins sowie andere mögliche verlängerte Pin-Sets auf dem Markt die Gleitstangen oder geben sie nicht frei. Oberfläche: Schwarz: Schwarzes Oxid. Inhalt: 1 x Drehstift, 1 x Demontagestift. Merkmale: Weniger Schritte zum Entfernen der Stifte erforderlich. Frühe, werkzeuglose Montage und Demontage. In Kombination mit den verbesserten Raststiften für eine einfachere Montage und Demontage ist kein Splinttreiber erforderlich. Lässt sich sicher einrasten. Innovative QD-Rotationsfunktion NeQuick-Gewehrmontage und -demontage Verbesserte Korrosionsbeständigkeit Hinweis: Entwickelt für geschmiedete Mil-Spec-Empfänger. Passt möglicherweise nicht auf einige untere Billet-Empfänger. -CALIFORNIA PROPOSITION 65 WARNUNG:- WARNUNG: Dieses Produkt enthält Chemikalien, von denen dem Staat Kalifornien bekannt ist, dass sie Krebs, Geburtsfehler oder andere Fortpflanzungsschäden verursachen. Weitere Informationen: www.P65Warnings.ca.gov
38.9 EUR 6 38,90 € *
Lieferzeit ca. 14-21 Werktage.
6 Stk. im Lager USA
Eigenschaften: Marke: AR-15

Eigenschaften

Marke: AR-15 Versandgewicht: 0,018kg Versandhöhe: 152mm Versandbreite: 13mm Versandlänge: 114mm




The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate, and remove the pins as shown. This new design combined with our enhanced detent pins retained inside the pin springs assist in making assembly and disassembly an almost effortless task with minimal tools and effort. The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers. DISCLAIMER: Due to the compact design of the PDW Stock and PDW Stabilizer, the SI Extended, Shift & Ultra Light Pivot / Takedown Pins, as well as other possible extended pin sets on the market, will bind or not clear the slide rods. Finish: Black: Black oxide Contents: 1x Pivot Pin 1x Takedown Pin Features: Less steps needed to remove pins Early tool less assembly and removal Combine with the enhanced detent pins for easier assembly and removal liminates the need for a pin punch. Locks into place securely. Innovative QD rotation feature NeQuick rifle assembly and disassembly Improved corrosion resistance Note: Designed around Forged Mil-Spec receivers. May not fit some billet lower receivers. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Newsletter