Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
Trage mehr Munition immer bereit!
Die SURESHELL POLYMER SHOTSHELL CARRIER von MESA TACTICAL PRODUCTS sind die perfekte Lösung für professionelle Anwender, die keine Kompromisse bei Qualität, Leistung und Haltbarkeit eingehen möchten. Diese Polymer-Munitionshalter sind eine besonders attraktive und wirtschaftliche Alternative zu den kostengünstigen Kunststoffhaltern der Konkurrenz.
Produktbeschreibung
Die SureShell® Polymer Shotshell Carrier bestehen aus strapazierfähigem, schlagfestem Polymer. Dieses System ist in einer Konfiguration für sechs Schalen erhältlich und verfügt über Schalenhalter, die aus glasgefülltem Polymer spritzgegossen sind. Diese sind mit einer leichten Aluminium-Rückplatte und messinggewindeten Einsätzen am Empfänger befestigt.
Zusätzlich umfasst der SureShell Polymer Carrier ein innovatives duales Gummireibungssystem, das die Schalen zuverlässig an ihrem Platz hält. Einige Modelle sind mit hitzebeständigen, selbstklebenden, gestanzten Gummidichtungen ausgestattet, um die Oberfläche der Schrotflinte zu schützen.
Das Montagesystem für die Remington 870, 1100 und 11-87 verwendet eine Kombination aus Stahlbefestigungen, die in einen Stahlstift (hinten) und gekoppelte Chicago-Schrauben (vorne) geschraubt sind, um eine sicherere Befestigung an der Schrotflinte zu gewährleisten, ohne das Risiko des Einklemmen des Empfängers. Die Montageplatte verfügt sogar über ein Fenster über dem Seriennummernstandort der Schrotflinte, um es den Rüstmeistern zu erleichtern, ihre Waffen zu inventarisieren.
Technische Spezifikationen
- Spritzgegossen aus glasgefülltem Polymer
- Leichte Aluminium-Rückplatte
- Mattschwarz
- Nur für 12 Gauge
- Alle Modelle beinhalten Montagematerial, Gummidichtung und Installationsanleitung
- Rechtshand-Modelle nur
- Remington Sidemount passt für Modelle 870/1100/11-87 (möglicherweise Anpassungen am Gewehr erforderlich)
- Rem 6-Round Sidemount – 6¼” (15.8 cm) lang x 1½” hoch. 5.4 oz. (152g) Gewicht
- Rem 8-Round Sidemount – 7¾” (19.7 cm) lang x 1½” hoch. 7 oz. (200g) Gewicht
- Remington Picatinny passt für Modelle 870/1100/11-87 (möglicherweise Anpassungen am Gewehr erforderlich). 7” (15.8 cm) lang x 2½” (6.3 cm) hoch. 7.6 oz. (215g) Gewicht
- Mossberg passt für Modelle 500/590. Nur 6-Round. 6-3/8" (16.2 cm) lang x 1-3/8" (3.5 cm) hoch. 5.2 oz. (147g) Gewicht
- Benelli Sidemount passt für M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2 cm) lang x 2½” hoch. 6.3 oz. (179g) Gewicht
- Benelli Picatinny verfügbar für M2 (erfordert Bohren und Gewindeschneiden des Empfängers für M1), M4/M1014 und Supernova. Benelli M2 6-Round Picatinny – 6” lang x 2” (5.1 cm) hoch. 7.4 oz. (210g) Gewicht
- Benelli M4/M1014 6-Round Picatinny – 6” lang x 2” (5.1 cm) hoch. 7.5 oz. (213g) Gewicht
* Erfordert die Verwendung eines kürzeren Vorderschafts bei Rem 870. + Erfordert geringfügige Änderungen am Vorderschaft für Rem 1100/11-87. ** Erfordert Bohren/Gewindeschneiden des Empfängers für M1.