Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Kompakte und präzise Montage für dein Trijicon RMR Rotpunktvisier
Die S&W M&P 22 COMPACT TRIJICON RMR SIGHT MOUNT von EGW ist die perfekte Lösung, um dein Trijicon RMR Rotpunktvisier sicher und stabil zu montieren.
Produktdetails:
- Material: 7075 Aluminium
- Beschichtung: Matt Schwarz Hartbeschichtung
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Montagematerial: (2) 6-32 Flachkopf-Schrauben, (1) 6-32 X 3/16 Set-Schraube
- Rotpunktkompatibilität: Trijicon RMR, Holosun HS507C
Kompatibilität:
Diese Montage passt:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Diese Montage passt nicht:
Installation:
Um dein Trijicon RMR Rotpunktvisier zu montieren, entferne einfach die hintere Visierung deiner Waffe und ersetze sie durch unsere Montage. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit abnehmen und deine hintere Visierung wieder anbringen. Montagematerial ist im Lieferumfang enthalten.
Installationsanleitung:
- Die hintere Visierung entfernen*
- Die EGW Sight Mount in die Schwalbenschwanzführung einsetzen
- Set-Schraube anziehen (falls zutreffend)
- Das Rotpunktvisier auf die EGW Sight Mount setzen (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und schützt das Visier vor Loctite)
- Blaue Loctite auf die mitgelieferten Montageschrauben auftragen
- Montageschrauben mit 15 in/lbs anziehen
Hinweis: Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel zur Installation.