Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich

APEX TACTICAL SPECIALTIES INC
S&W M&P M2.0 FLAT FACED FORWARD SET TRIGGER KIT

854263007227 100026293
Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
275.9 275.9 1 EUR
Artikel-Nr.: 100026293
APEX TACTICAL SPECIALTIES INC S&W M&P M2.0 FLAT FACED FORWARD SET TRIGGER KIT
Herstellerproduktnummer: 100-154 854263007227 Das S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit von Apex Tactical ist ein einfach zu installierender Ersatz für den Werksabzug Ihres M2.0, der Ihnen einen leichteren, gleichmäßigeren und gleichmäßigeren Abzugszug bietet. Der solide Abzugskörper bietet eine komfortablere Schnittstelle mit dem Finger für eine bessere Kontrolle, während die zuverlässige Funktion des werkseitigen Abzugssicherheitssystems vollständig erhalten bleibt. Der M&P M2.0 Flat-Faced Forward Set Trigger hat den Pre-Travel und Over-Travel deutlich reduziert, mit einem knackigen, entscheidenden Break dazwischen. Ein kürzerer, positiverer Reset bedeutet schnellere Folgeaufnahmen. Reduziert den gesamten Abzugsweg um etwa 40 % Glättet den Abzugszug und macht ihn gleichmäßiger Erleichtert das Abzugsgewicht um ca. 2 lbs. bis 4-6 Pfund. Das tatsächliche Zuggewicht hängt von den von Ihnen installierten Abzugs- und Abzugsrückholfedern ab (und von den Variationen in den einzelnen Waffen). Apex enthält zwei Abzugsfedern und zwei Abzugsrückholfedern im Kit, sodass Sie den Abzug auf Ihre spezifischen Schießanforderungen "abstimmen" können. Wählen Sie die „Duty/Carry“-Federn, um ein Zuggewicht für Duty- oder CCW-Carry-Pistolen einzustellen. Die Kontur des M&P M2.0 Flat-Faced Forward Set Trigger ermöglicht es Ihnen auch, Ihren Finger tiefer auf die Abzugsfläche zu legen, um eine zusätzliche Hebelwirkung zu erzielen, mit der Sie das geringere Zuggewicht optimal nutzen können. Mit ein wenig Aufmerksamkeit für die richtige Fingerplatzierung ist der flachflächige, nach vorne gerichtete Abzug ein ausgezeichneter Abzug für Wettkampfpistolen. Brownells Gun Tech™ Hinweis: Dieses Apex Tactical Flat-Faced Forward Set Trigger Kit ist NUR für den Einbau in M&P M2.0-Pistolen von Smith & Wesson in allen Zentralfeuerkalibern und -konfigurationen, einschließlich M&P 2.0 Compact, vorgesehen. Nicht für die Verwendung in Original-M&P-Modellen; Verwenden Sie #100-016-327 oder #100-017-344 in Original-M&P-Pistolen.Das Kit enthält die folgenden Komponenten: Flat-Face Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, Spring & Talon Tactical Tool) Slave Pin (unterstützt bei der Installation der Abzugsrückholfeder)
275.9 EUR 41 275,90 € *
Lieferzeit ca. 14-21 Werktage.
Mehr als 10 Stk. im Lager USA
Eigenschaften: Marke: Smith & Wesson Modell: M&P 2.0 Compact Oberfläche: Black Style: Flat

Eigenschaften

Marke: Smith & Wesson Modell: M&P 2.0 Compact Oberfläche: Black Style: Flat Versandgewicht: 0,029kg Versandhöhe: 102mm Versandbreite: 32mm Versandlänge: 97mm

Artikeldetails

US-Exportklassifizierung: 0A501.c



Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
Newsletter