Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
811291030023 100061466
Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
53.9 53.9 1 EUR
Artikel-Nr.: 100061466
MOUNTAIN TACTICAL T3/T3X LUG
Herstellerproduktnummer: T3T3XESL 811291030023 Die Mountain Tactical Company ist stolz darauf, unsere Edelstahl-Rückstoßösen der Gen3 Elite-Serie für Ihr Tikka T3- und Tikka T3x-Gewehr vorstellen zu können. Die neueste Generation von Rückstoßösen von Mountain Tactical ist eine bedeutende Verbesserung gegenüber der zweiten Generation von Stollen. Zuvor verwendeten wir Edelstahl 316 in Marinequalität mit einer Streckgrenze von 89.000 psi. Dies war eine wesentliche Verbesserung gegenüber der werksseitigen Aluminiumöse mit einer Streckgrenze von 21.000 psi oder der T3x-Stahlfahne mit einer Streckgrenze von 36.000 psi (deutlich weniger als die von modernen Gewehrpatronen erzeugten Standard-psi). Jetzt haben wir den verwendeten Edelstahl auf 17-4PH H900 Edelstahl aufgerüstet. Die Streckgrenze dieses bemerkenswerten Stahls beträgt 200.000 psi. Das ist 33% stärker als Titan der Klasse 5! Mountain Tactical ist stolz darauf, seine Edelstahl-Rückstoßösen der Gen3 Elite-Serie aus 17-4PH H900-Edelstahl für ultimative Wetterbeständigkeit und lebenslange Lebensdauer herzustellen. Die Installation ist einfach. Entfernen Sie einfach die beiden Aktionsschrauben und trennen Sie Ihre Aktion vom Lager. Entfernen Sie mit einer Zange das vorhandene Metallstück aus dem Vorrat. Schieben Sie dann die Rückstoßöse der Elite-Serie in dieselbe Aussparung. Setzen Sie Ihre Aktion und Lager wieder zusammen und ziehen Sie Ihre Aktionsschrauben fest. Du bist fertig! Beachten Sie, dass es manchmal etwas länger dauern kann, Ihre Aktion und Ihren Bestand auszurichten, da die Toleranzen der Rückstoßöse enger sind. Die Rückstoßösen der Elite-Serie der Mountain Tactical Company für den Tikka T3 sind von bester Qualität, die Sie jemals finden werden.
53.9 EUR 0 53,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Marke: Tikka Modell: T3, T3x

Eigenschaften

Marke: Tikka Modell: T3x,T3 Versandgewicht: 0,025kg Versandhöhe: 152mm Versandbreite: 76mm Versandlänge: 152mm




Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
Newsletter