Want a new caliber or a fresh barrel in your Tikka T3X? Don't worry, you won't have to make a special trip to the gunsmith to redo your rifle. Thanks to the unique system found in the International Barrels Pre-Fit Barrel system, barrel-swap jobs that used to be performed only by gunsmiths can now be done right in your workshop safely and easily! Each International Barrels Pre-Fit Tikka T3X precision barrel is constructed with a barrel-nut system that can be threaded onto your action right at home. Once the barrel is threaded into place, simply check its positioning with a set of headspace gauges and then tighten the barrel nut down to its proper torque settings. Then you're done! The easy attachment system of these International Barrels Pre-Fit Barrels isn't all you're getting. These gun barrels are button-rifled and are made to precision tolerances, double-checked at every step along the way. The barrels are made using the company's Medium contour, which features a straight taper from the breech to the muzzle. Each barrel is threaded with 5/8-24 TPI muzzle threads. The company warns that some stocks may need to be inlet to allow clearance for the barrel nut.
Verbessere dein Tikka T3X mit einem neuen Präzisionslauf!
Suchst du nach einem neuen Kaliber oder einem frischen Lauf für dein Tikka T3X? Keine Sorge, du musst nicht extra zum Büchsenmacher fahren, um dein Gewehr umzubauen. Dank des einzigartigen Systems der International Barrels Pre-Fit Lauf-Systeme kannst du den Laufwechsel jetzt sicher und einfach direkt in deiner Werkstatt durchführen!
Produktbeschreibung
Jeder International Barrels Pre-Fit Tikka T3X Präzisionslauf ist mit einem Laufmutter-System konstruiert, das direkt auf deinen Verschluss zu Hause geschraubt werden kann. Sobald der Lauf an seinem Platz ist, überprüfe einfach die Position mit einem Satz Headspace Gauges und ziehe dann die Laufmutter auf das richtige Drehmoment an. Und schon bist du fertig!
Das einfache Verbindungssystem dieser International Barrels Pre-Fit Läufe ist nicht alles, was du bekommst. Diese Gewehrläufe sind Button-rifled und werden nach präzisen Toleranzen gefertigt, die bei jedem Schritt überprüft werden. Die Läufe werden mit dem Medium-Kontur des Unternehmens hergestellt, der einen geraden Verlauf vom Patronenlager bis zur Mündung aufweist. Jeder Lauf ist mit 5/8-24 TPI Mündungsgewinden versehen.
- Einfacher Laufwechsel direkt zu Hause
- Hochpräzise Fertigung mit doppelter Überprüfung
- Medium Kontur für optimale Leistung
Das Unternehmen warnt, dass einige Stocks möglicherweise bearbeitet werden müssen, um Platz für die Laufmutter zu schaffen.